Linear, Compass (ICs)
-
Hall Effect Latch Sensor DIODES AH374-P-B with Open Drain Output and Wide Operating Temperature Range
AH374 Single Phase Hall Effect LatchThe AH374 is an integrated Hall-Effect latched sensor designed for electronic commutation of brush-less DC motor applications. It features an on-chip Hall voltage generator, a comparator for Hall voltage amplification, and a Schmitt trigger for noise rejection. The device has an open-drain output and a wide operating supply range due to an internal band-gap regulator. The output switches low when magnetic flux density exceeds the operate
-
digital Hall effect sensor ElecSuper ES44EUA suitable for cost sensitive position and motion sensing needs
Product OverviewThe ES44EUA is a small, versatile digital Hall-effect sensor designed for cost-sensitive, high-volume position and motion sensing applications. It operates with unipolar magnetic switching, responding to either the North or South pole of a magnetic field. Its wide operating voltage range (4.5Vdc to 24Vdc) and robust design make it suitable for various demanding environments. Key advantages include built-in reverse voltage protection and operation up to 85C
-
Magnetic Field Controlled Sensor GoChip Elec Tech Shanghai GH1230KSW for Position Control Applications
Product OverviewThe GH1200 Series is a unipolar Hall effect position sensor designed with CMOS technology. It integrates a voltage regulator, a Hall sensor with dynamic offset compensation, a small signal amplifier, a Schmitt trigger, and an open-drain output driver. This sensor outputs a digital voltage signal suitable for rectangular or cylindrical magnets. When no magnetic field is present, the output is high. When the magnetic field strength exceeds the operating point
-
GoChip Elec Tech Shanghai GH43F Hall Effect Sensor with Long Lifespan and Fast Switching Performance
GH143F Single-Pole Switch Hall Position SensorThe GH143F series is a high-temperature unipolar Hall effect integrated sensor designed for consumer and industrial electronic products. It features a wide operating voltage range, high output current, fast switching speed without jitter, wide operating frequency, long lifespan, compact size, and easy installation. It can directly interface with logic circuits. The sensor comprises an internal voltage regulator, Hall voltage
-
Linear Hall Effect Sensor Hallwee HAL4901UA with Low Noise Output and Wide Operating Voltage Range
HAL490X CMOS Ratio-Metric Linear Hall Effect IC The HAL490X is a linear Hall-effect sensor integrating a Hall sensor, linear amplifier, and Totem-Pole output stage. It offers low-noise output, eliminating the need for external filtering, and provides enhanced temperature stability and accuracy. With a wide operating temperature range of -40 to +125, it is suitable for commercial, consumer, and industrial applications. The sensor's high sensitivity accurately tracks subtle
-
Temperature Compensated Hall Sensor DIODES AH1751-PG-B-A with Latch Operation and Wide Voltage Range
Product DescriptionThe AH1751 is a single-digital-output Hall-effect sensor designed for high-temperature operation. It features an integrated Hall voltage generator, amplifier, comparator for noise rejection with switching hysteresis, and an open-collector output pre-driver. A band-gap regulator provides temperature-compensated supply voltage, allowing a wide operating supply range. The device operates as a latch: the OUT pin turns on (low) when magnetic flux density (B)
-
automotive Hall Effect sensor IC DIODES AH3271Q-P-A with internal bandgap regulator and Zener clamp
Product OverviewThe DIODES AH3231Q-AH3234Q/AH3270Q-AH3272Q are high-voltage, high-sensitivity, two-wire Hall Effect Unipolar/Latch switch ICs with AEC-Q100 qualification, designed for position and proximity sensing in automotive applications. They operate over a wide supply range of 2.7V to 27V, featuring a chopper-stabilized architecture, internal bandgap regulator, reverse blocking diode with Zener clamp, and built-in thermal protection with auto-restart. The devices offer
-
Automotive Hall Effect Latch IC DIODES AH3764Q-W-7 with Open Drain Output and Overcurrent Protection
Product OverviewThe AH3764Q is a high-voltage, high-sensitivity automotive Hall-Effect latch IC designed for applications such as brushless DC-motor commutation, speed measurement, and angular or linear encoders. It operates over a wide supply range of 3.0V to 28V and features chopper stabilization for excellent temperature stability and minimal switch point drift. The device includes robust protection mechanisms like a reverse blocking diode and Zener clamps on supply and
-
SOT89 packaged Hall effect sensor IC GoChip Elec Tech Shanghai GH1543A with supply voltage 3.8 to 30 VDC
Product Overview The GH1543A is a unipolar switched Hall effect sensor IC designed for contactless switching applications. It features a wide temperature range (-40 to +150C) and supply voltage range (3.8 to 30 VDC) for design flexibility and harsh environments. Its industry-standard "gull-wing" SOT-89 package offers increased circuit board density and reduced susceptibility to solder bridging. The device includes an on-chip Hall voltage generator, amplifier, Schmitt trigger
-
Small digital Hall effect sensor ElecSuper ES44ESO with supply current around 4 milliamps at 12 volts
Product OverviewThe ES44ESO is a small, versatile digital Hall-effect sensor operated by magnetic fields. Designed for cost-sensitive, high-volume applications, its unipolar nature responds to a single magnetic pole (North or South). The wide 4.5Vdc to 24Vdc supply voltage range makes it suitable for diverse applications. Its robust design operates up to 85C and features built-in reverse voltage protection.Product AttributesBrand: ElecSuperModel: ES44ESOMaterial: RoHS
-
Portable Device Compatible Omnipolar Hall Effect Switch DIODES AH1808-P-B with Sensitive Hall Plates
Product OverviewThe AH1808 is a high-sensitivity, micropower Omnipolar Hall Effect switch IC designed for portable and battery-powered consumer equipment, home appliances, and industrial applications such as smart-meter magnetic-tamper detection. It offers reliable performance over a wide operating range due to its sensitive Hall effect plates and chopper-stabilized architecture. Optimized for low power consumption (24W at 3V), it operates from 2.5V to 5.5V and features a
-
Unipolar Hall Effect Position Sensor GoChip Elec Tech Shanghai GH1104 Series with Wide Voltage Range
Product OverviewThe GH1104 series is a unipolar Hall effect position sensor designed for consumer and industrial electronic products. It features a wide operating voltage range, high output current, fast switching speed without jitter, and a wide operating frequency. The sensor offers long life, compact size, and easy installation, with direct compatibility for logic circuits. It is suitable for applications involving rectangular or cylindrical magnets.Product AttributesBrand
