Linear, Compass (ICs)
-
Digital Voltage Output Hall Effect Sensor GoChip Elec Tech Shanghai GH1230KUA with Wide Voltage Range
Product OverviewThe GH1200 Series is a unipolar Hall effect position sensor designed with CMOS technology. It integrates a voltage regulator, Hall sensor with dynamic offset compensation, small signal amplifier, Schmitt trigger, and an open-drain output driver. This sensor provides a digital voltage signal suitable for operation with rectangular or cylindrical magnets. It features a wide operating voltage range and is ideal for applications requiring contactless switching and
-
Industrial Sensor Module EG Micro EG49 Precision Measurement Device Suitable for Automation Systems
2204081930_EG-Micro-EG49_C2987461.pdf
-
linear Hall effect sensor Hallwee HAL9303RSW with temperature stable thin film resistors and rail to rail output
Product OverviewThe HAL9303R is a small, general-purpose, linear Hall effect sensor. Its output signal level is proportional to the magnetic field strength applied to the device's sensitive face. At zero magnetic field, the output voltage is half the supply voltage. An 'S' pole on the marked face (TO/SW package) causes the output voltage to increase linearly with magnetic field strength, while an 'N' pole causes it to decrease linearly. It features low-noise output,
-
Linear Hall effect sensor Hallwee HAL9303SO featuring thin film resistors and stable output voltage
Product DescriptionThe HAL9303 is a small, general-purpose, linear Hall effect sensor. Its output signal level is proportional to the magnetic field strength applied to the device's sensitive face. At zero magnetic field, the output voltage is half of the supply voltage. When an S pole appears on the marked face (TO/SW package), the output voltage increases linearly with magnetic field strength. Conversely, an N pole causes the output voltage to decrease linearly with
-
DIODES AH175 PG A B Hall Effect Latch Sensor Featuring Noise Rejection and Temperature Compensation
OverviewThe AH175 is a single-digital-output Hall-Effect latch sensor designed for high-temperature operation. It features an integrated Hall voltage generator, amplifier, comparator with hysteresis for noise rejection, and an open-collector output pre-driver. A band-gap regulator ensures a temperature-compensated supply voltage and a wide operating supply range. The device switches its output low when magnetic flux density exceeds the operate point (Bop) and remains low
-
CMOS Hall effect latch sensor GoChip Elec Tech Shanghai GH1120KSE for current switching and RPM detection
Product OverviewThe GH1120 is a Hall-effect latch designed in CMOS technology, featuring a wide operating voltage range (3.5V to 24V DC) and an extended temperature range (40 to +125). It includes an internal voltage regulator, Hall sensor with dynamic offset cancellation, Schmitt trigger, and an open-drain output driver. The device operates with a high magnetic sensitivity (Bhy=60 Gauss Typ.). Its output is "on" (Low) with no magnetic field and switches "off" (High) when the
-
Temperature compensated magnetic sensor GoChip Elec Tech Shanghai GH1496BSY with ratiometric output voltage
Product Overview The GH149X series linear Hall effect sensors from GOCHIP ELECTRONICS TECHNOLOGY (Shanghai) CO., LTD. are designed for precise magnetic field detection. Featuring integrated Hall circuitry with temperature compensation and resistance correction, these sensors offer enhanced temperature stability and accuracy across a wide operating temperature range of -40 to +150. They provide a ratiometric output proportional to both supply voltage and magnetic field
-
Micropower Hall effect switch DIODES AH1887-ZG-7 designed for handheld magnetic detection devices
Product OverviewThe AH1887 is a micropower, ultra-sensitive Hall effect switch designed for battery-powered, handheld equipment. It features two Hall effect plates and a dual CMOS output driver, offering low power consumption down to 15uW at a 1.8V supply. The device activates its outputs when exposed to a sufficiently strong magnetic field (either north or south pole) and deactivates when the field is removed. Output1 responds to a South pole, and Output2 responds to a North
-
Magnetic Field Sensing Linear Hall Sensor GoChip Elec Tech Shanghai GH1495ALSY with Enhanced Accuracy
Linear Hall Sensor - GH149X Series Product Overview The GH149X series linear Hall effect sensors from GOCHIP ELECTRONICS TECHNOLOGY (Shanghai) CO., LTD. are designed for a wide range of consumer and industrial electronic applications. These sensors offer precise and temperature-compensated magnetic field detection with a ratiometric output proportional to both supply voltage and magnetic field strength. Featuring enhanced temperature stability, high accuracy due to resistance
-
Robust differential Hall effect sensor GoChip Elec Tech Shanghai GH1922 for gear and position sensing
Product OverviewThe GH1922U is a high-precision differential Hall effect sensor IC designed for detecting changes in magnetic fields. It utilizes a differential Hall sensor structure to minimize the impact of temperature drift, manufacturing variations, and bias magnetic field fluctuations. This makes it ideal for non-zero speed detection applications, including gear and position sensing. The device operates reliably within a wide voltage (3.5-24V) and temperature (-40 to
-
Linear Hall Sensor with Integrated Resistance and Full Voltage Output GoChip Elec Tech Shanghai GH1496BUA
Linear Hall Sensor - GH149X Series Product Overview The GH149X series linear Hall effect sensors from GOCHIP ELECTRONICS TECHNOLOGY (Shanghai) CO., LTD. are designed for precise magnetic field detection. Featuring integrated resistance correction for accurate sensitivity and temperature compensation, these sensors offer full voltage range (Rail-to-Rail) output for enhanced signal efficiency and higher accuracy. They are suitable for a wide operating temperature range of -40
-
Linear Hall Effect Sensor IC Hallwee HAL4901SO with Low Noise Output and Wide Operating Voltage Range
Product DescriptionThe HAL490X is a linear Hall-effect sensor IC designed for a wide range of applications. It integrates a Hall sensor, a linear amplifier, and a Totem-Pole output stage, offering low-noise output that eliminates the need for external filtering. This sensor provides enhanced temperature stability and accuracy, with a broad operating temperature range of -40 to +125, making it suitable for commercial, consumer, and industrial environments. Its high sensitivity
