Linear, Compass (ICs)
-
Compact Omnipolar Hall Effect Sensor DIODES AH1902-FT4-7 with Internal Pull Up and Pull Down Features
Product OverviewThe AH1902 is a high-sensitivity, micropower Omnipolar Hall-effect switch IC designed for portable and battery-powered consumer electronics, as well as office equipment, home appliances, and industrial applications. It features internal pull-up and pull-down capability, an average ...
-
Hall Effect Sensor GoChip Elec Tech Shanghai GH1104ESW with Fast Switching Speed and No Signal Jitter
Product OverviewThe GH1104 series is a unipolar Hall effect position sensor designed for consumer and industrial electronic products. It features a wide operating voltage range, high output current, fast switching speed with no jitter, and a broad operating frequency (0-100KHz). The sensor offers ...
-
omnipolar hall effect switch ic diodes ah1809-z-7 with operating voltage from 2.5 volts to 5.5 volts
Product OverviewThe AH1809 is a low sensitivity, micropower Omnipolar Hall Effect switch IC designed for battery-powered consumer products, home appliances, and industrial equipment like smart e-meters. It offers a reliable solution over its operating range due to its dual Hall Effect plates and ...
-
Hall Effect Switch IC DIODES AH1903-FA-7 with Low Average Supply Current and Flexible Mode Selection
Product OverviewThe AH1903 is a high-sensitivity, micropower Hall-effect switch IC offering selectable Omnipolar or Unipolar operation. Designed for battery-powered devices and office/home appliances, it features a low average supply current of 4.3A at 1.8V and operates across a wide supply range of ...
-
Bipolar latching Hall IC sensor EG Micro EG41A designed for brushless DC motor and mechatronic systems
EG41 Bipolar Latching Hall ICThe EG41 is a bipolar latching Hall effect sensor IC designed for brushless DC motor applications. It integrates a Hall sensor, voltage regulator, differential amplifier, Schmitt trigger, and an open-collector output stage. This device offers fast response, high ...
-
High Sensitivity Omnipolar Hall Effect Switch DIODES AH3563Q-SA-7 with Overcurrent Output Protection
Product OverviewThe AH3563Q is an AEC-Q100 qualified, high-voltage, high-sensitivity Hall effect omnipolar switch IC designed for automotive position and proximity sensing applications. It operates from a wide supply voltage range of 3.0V to 28V and features a chopper-stabilized architecture for ...
-
Magnetic Flux Density Switch with Hysteresis DIODES AH277AZ4-AG1 Integrated Hall Effect Latch Device
Product OverviewThe AH277A is an integrated Hall effect latch with complementary open-collector output drivers, designed for electronic commutation in brushless DC motor applications. It features an on-chip Hall sensor, amplifier, Schmitt trigger for noise rejection, and temperature compensation. ...
-
Magnetic proximity sensor DIODES AH3372-SA-7 Hall Effect switch IC designed for operation in harsh industrial environments
Product OverviewThe AH3372 is a high voltage, high sensitivity Hall Effect Unipolar switch IC designed for proximity, position, and level sensing in industrial and consumer home appliances and personal care applications. Optimized for a wide supply range of 3.0V to 28V, it features a chopper...
-
GoChip Elec Tech Shanghai GH49FEUA C compact Linear Hall Effect Sensor IC with TO 92S SIP 3L package type
Product Overview The GH49F is a compact, ratio-metric Linear Hall Effect Sensor IC designed for operation with permanent magnets or electromagnets. It provides an output voltage proportional to the magnetic field strength, with integrated circuitry minimizing the need for external filtering due to ...
-
Temperature compensated Hall Effect latch sensor DIODES AH175-WG-7-A with internal band gap voltage regulator
Product OverviewThe AH175 is a single-digital-output Hall-Effect latch sensor designed for high-temperature operation. It features an on-chip Hall voltage generator, amplifier, comparator with hysteresis for noise rejection, and an open-collector output pre-driver. An internal band-gap regulator ...
-
Ultra sensitive Hall effect switch DIODES AH1803 WG 7 ideal for cellular phones and cordless devices
Product OverviewThe AH1803 is a micropower, ultra-sensitive Hall effect switch designed for battery-operated handheld equipment. It features two Hall effect plates and a CMOS output driver, offering operation with either the north or south pole. With a low power consumption down to 24W, it is ideal ...
-
Hall Effect Sensor Diodes AH9247Z3-G1 Featuring Sleep Awake Logic and Magnetic Flux Density Detection
Product OverviewThe AH9247 is a high-sensitivity, micropower Hall-effect switch designed for battery-operated, handheld equipment. Featuring a chopper-stabilized amplifier for improved magnetic switch point stability and a sleep-awake logic to reduce average current consumption, this device offers ...
