Linear, Compass (ICs)
-
Automotive position sensing Hall Effect IC DIODES AH3280Q-P-B with wide supply voltage from 2.7V to 27V
Product OverviewThe DIODES AH3241Q-AH3244Q/AH3280Q-AH3282Q are high voltage, high sensitivity, two-wire Hall Effect Unipolar/Latch switch ICs with integrated self-diagnostics and automotive-compliant AEC-Q100 qualification. Designed for position and proximity sensing in automotive applications, they operate over a wide supply range of 2.7V to 27V. Key features include a chopper-stabilized architecture, internal bandgap regulator, reverse blocking diode with Zener clamp, and
-
GoChip Elec Tech Shanghai GH1511A Hall Sensor with Long Lifespan and Direct Logic Circuit Interface
GH1511A Latching Hall Position SensorThe GH1511A is a high-temperature bipolar Hall effect position sensor designed for consumer and industrial electronic products. It integrates a voltage regulator, Hall voltage generator, differential amplifier, temperature compensator, Schmitt trigger, and an open-collector output stage. This magnetic sensitive sensor circuit takes magnetic induction intensity as input and outputs a digital voltage signal. It operates with dual magnetic
-
GoChip Elec Tech Shanghai GH1248ESW SOT23 3L ultra sensitive Hall effect switch with CMOS technology
Product DescriptionThe GH1248 is an ultra-sensitive Hall-effect switch featuring a digital latched output, primarily designed for battery-operated, handheld equipment. It utilizes a special CMOS process for low-voltage and low-power requirements. A chopper-stabilized amplifier enhances the stability of magnetic switch points. The integrated sleep-awake logic controls the IC's power consumption, reducing average operating current. During the awake time, the output responds to
-
Low Profile X1 DFN1216 4 Package DIODES AH1895-Z-7 Omnipolar Hall Effect Switch for Portable Devices
Product OverviewThe AH1895 is a medium sensitivity, micropower Omnipolar Hall-effect switch IC designed for portable and battery-powered devices. It features internal pull-up and pull-down capabilities, a wide supply voltage range (1.6V to 3.6V), and a hibernating clocking system for minimal power consumption (average supply current of 4.3uA at 1.85V). The device is activated by either a north or south magnetic pole and is available in small, low-profile X1-DFN1216-4 and
-
Precise Rotor Position Sensing Device GoChip Elec Tech Shanghai GH1187 for Brushless DC Motor Control
Product OverviewThe GH1187 is an integrated Hall Effect latched sensor designed for electronic commutation of brush-less DC motor applications. It features an on-chip Hall voltage generator, comparator, Schmitt trigger for noise rejection, and an open-collector output. The device operates over a wide supply voltage range with temperature compensation and provides protection against reverse power connection. It is suitable for applications requiring precise rotor position
-
Hall Effect Omnipolar Switch IC GoChip Elec Tech Shanghai GH1248 with Internally Controlled Clocking
Product OverviewThe GH1248/1250/1253 is an ultra-sensitive, micropower Hall-effect omnipolar switch IC with a digital latched output. Designed for battery-powered applications, it features a chopper-stabilized amplifier for improved stability and an internally controlled clocking mechanism to conserve power by cycling the Hall sensor and analog signal processing circuits into a "Sleep" mode. The device is awakened periodically to evaluate magnetic flux against predefined
-
automotive Hall Effect unipolar switch DIODES AH3390Q-P-B with ultra low sensitivity and wide voltage range
Product OverviewThe AH3390Q is an AECQ100 qualified, high voltage, ultra-low sensitivity automotive Hall Effect unipolar switch IC. Designed for demanding automotive applications, it offers reliable position and proximity sensing over a wide supply range of 3.0V to 28V. Its chopper-stabilized architecture and internal bandgap regulator ensure temperature compensation and stability. The device features robust protection with a reverse blocking diode and Zener clamps on supply
-
Linear Hall Effect Sensor GoChip Elec Tech Shanghai GH1321LUA with Wide Operating Temperature Range
Product Overview The GH132X series are linear Hall effect sensors designed for consumer and industrial electronic products. These sensors offer precise sensitivity and temperature compensation through internal corrected resistors, operating across a wide temperature range of -40 to +150. They provide proportional output voltage that varies with magnetic field strength, featuring rail-to-rail output for enhanced signal efficiency and accuracy. The GH132X series is suitable for
-
Digital Hall Effect Sensor ElecSuper SS43F Unipolar Magnetic Position Sensor with Wide Voltage Range
Product OverviewThe SS43F is a versatile digital Hall-effect sensor designed for cost-sensitive, high-volume position and motion sensing applications. It operates on a wide supply voltage range of 3.8Vdc to 30Vdc and is unipolar, responding to either the North or South magnetic pole. Its robust design allows operation up to 150C, and it features built-in reverse voltage protection. The sensor is well-suited for applications like shift selectors, wiper end/home position
-
Omnipolar hall effect switch ic DIODES AH1806-P-A low current consumption for battery powered devices
Product OverviewThe AH1806 is a high-sensitivity, micro-power Omnipolar Hall effect switch IC designed for portable, battery-powered consumer, home appliance, and industrial applications. It offers reliable magnetic tamper detection and position sensing with a low power consumption of 24W at 3V. The device features a single open-drain output that switches on with either a North or South pole of sufficient field strength, providing a robust solution over a wide operating range
-
DIODES AH180 PG A MicroPower Hall Effect Sensor Switch with enhanced immunity to stress and RF noise
AH180 MicroPower Omnipolar Hall-Effect Sensor SwitchThe AH180 is a micro-power Omnipolar Hall-Effect switch designed for portable and battery-powered equipment such as cellular phones, PDAs, and portable PCs. It offers reliable performance across its operating range due to its dual Hall-Effect plates and chopper-stabilized architecture. Optimized for low power consumption (24W at 3V) and a wide supply voltage range (2.5V to 5.5V), the AH180 features a single open-drain output
-
Hall Effect switch DIODES AH1809-P-A designed for omnipolar magnetic field detection in industrial
Product OverviewThe AH1809 is a low sensitivity, micropower Omnipolar Hall Effect switch IC designed for battery-powered consumer products, home appliances, and industrial equipment like smart e-meters. It offers reliable performance over a wide operating range due to its two Hall Effect plates and chopper-stabilized architecture. Optimized for low power consumption, it operates from 2.5V to 5.5V and draws only 24W at 3V. The single open-drain output activates with either a
