Linear, Compass (ICs)
-
Linear Hall sensor chip HUAXIN HX6388KSO programmable with adjustable sensitivity and voltage output
Product DescriptionThe HX6388 is a programmable linear Hall sensor chip manufactured using BiCMOS technology. It outputs a voltage proportional to the magnetic flux density. Programmable parameters include quiescent voltage, sensitivity, polarity, clamping voltage, and sensitivity temperature drift compensation, all adjustable by the user. The device features open-circuit, over-voltage, and under-voltage detection. Multiple HX6388 devices can share a common bus, allowing
-
Compact ultra HUAXIN VCS1301S omnipolar magnetic switch sensor with high frequency response and low switch point
Product OverviewThe VCS1301 is a highly integrated, ultra-low power, omnipolar magnetic switch sensor. It combines an AMR magnetic sensor with high-precision CMOS processing circuitry in a miniature package. The CMOS circuitry features precisely controlled BOP/BRP offset voltage compensation and a push-pull output, offering an industrial operating temperature range (-40 to 125), a wide voltage supply range (1.8V to 5.5V), and nanoampere current consumption. Its omnipolar
-
magnetic switch Littelfuse LF21115TMR with TMR technology and consumption in compact form factor
Product OverviewThe LF21115TMR is a digital omni-polar magnetic switch utilizing TMR and CMOS technology. It offers high sensitivity, high speed, and low power consumption, integrating a TMR magnetic sensor with CMOS signal processing. Key features include an on-chip TMR voltage generator, amplifier, comparator, and Schmitt trigger for noise rejection. It operates with a push-pull output and X-axis sensing direction, supported by an internal band gap regulator for stable
-
Ultra High Sensitivity Magnetic Sensor HUAXIN HX6701KSO for Accurate Magnetic Switch Applications
HX6701 High Sensitivity, Quasi-Zero Power Magnetoresistive Sensor The HX6701 is a magnetic switch sensor integrating Tunnel Magnetoresistance (TMR) technology and CMOS technology. It offers high precision, high speed, low power consumption, and high sensitivity, making it suitable for magnetic switch detection in industrial and consumer electronics. The internal circuitry includes a voltage generator, comparator, digital logic control module, threshold trimming module, and
-
CMOS Technology Based Omnipolar Hall Switch HXY MOSFET HCC6201ST with Schmitt Trigger and Amplifier
OverviewThe HCC6201 is a low-power, high-sensitivity, omnipolar Hall switch IC designed and manufactured using CMOS technology. It integrates a voltage regulator, Hall voltage generator, small signal amplifier, chopper stabilizer, Schmitt trigger, and CMOS output driver. This chip offers good temperature stability, strong stress resistance, and high sensitivity, operating within a voltage range of 2.5V-5.5V. It is available in TO-92S through-hole and SOT-23-3L surface-mount
-
Plastic Threaded Barrel Sensor Littelfuse 59070-1-S-02-A for Switching Logic Level Loads in Automation
Product Overview The Littelfuse 59070 is a compact M8 plastic threaded barrel sensor designed for position and limit sensing applications. This magnetically operated proximity sensor features a two-part design with a threaded barrel and retaining nuts, offering simple installation and adjustment. It is capable of switching up to 265Vac/300Vdc at 10VA and functions optimally with the 57070 actuator (sold separately). The sensor operates through non-ferrous materials and is
-
bipolar latching hall switch HUAXIN HXS41HKUA with temperature range minus 40 to 125 degrees Celsius
HXS41H High Voltage Bipolar Latching Hall SwitchThe HXS41H is a high-voltage bipolar latching Hall switch manufactured using high-voltage Bipolar process technology. It integrates a magnetic sensing circuit comprising a voltage regulator, Hall voltage generator, differential amplifier, temperature compensation unit, Schmitt trigger, and an open-collector output stage. This device converts magnetic field strength into a digital voltage signal. It features built-in protection
-
Non contact switching solution Littelfuse 59025-1-T-02-F reed sensor suitable for battery powered IoT and industrial
Product Overview The Littelfuse 59025 Reed Sensor is a compact, cylindrical, non-contact switching solution designed for wet and harsh environments. It offers a choice of normally open, normally closed, or change-over contacts, capable of switching up to 265 Vac/300 Vdc at 10 VA. Ideal for battery-powered IoT applications due to no leakage current in the 'open' state, it facilitates efficient proximity/access and energy management systems. Its small size allows for easy
-
Unipolar Hall Effect Sensor HUAXIN HX3144UA with Wide Supply Voltage and High Load Current Capability
HX3144 High Sensitivity Unipolar Hall SwitchThe HX3144 is a unipolar Hall effect integrated circuit designed for magnetic sensing applications. It features reverse voltage protection, internal voltage regulation, a Hall voltage generator, a differential amplifier, a Schmitt trigger, and an open-collector output stage. This magnetic sensor is ideal for use with rectangular or cylindrical magnets. It operates reliably within a wide temperature range of -40 to 125, supports a
-
miniature Hall effect switch HUAXIN HX258EUA with temperature stability and integrated voltage regulator
HX258 High Sensitivity, Omnipolar Low Power Hall Switch The HX258 Hall effect sensor is a temperature-stable, stress-resistant, miniature Hall switch. It offers excellent high-temperature performance by utilizing chopper-stabilized dynamic offset cancellation, which reduces offset voltage caused by stress, temperature, and thermal stress. Integrated on a single silicon chip are a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilization, Schmitt
-
Press fit firecracker reed sensor Littelfuse 59040 1 T 02 A for non contact position and limit sensing
Product Overview The Littelfuse 59040 Press-Fit Firecracker Reed Sensor is a compact, cylindrical magnetically-operated proximity sensor designed for non-contact position and limit sensing. It features hermetically sealed contacts with options for normally open, normally closed, or change-over configurations, capable of switching up to 300Vdc at 10W. Its unique press-fit design with retaining ribs allows for simple, secure installation without screws, brackets, or glue,
-
Highly sensitive HUAXIN HX251EUA Hall effect sensor with offset compensation and signal amplification
Product Overview The HX251 is a highly sensitive, omnipolar, low-power Hall switch based on mixed-signal CMOS technology. It features advanced chopper stabilization for accurate and stable magnetic switch points. The device integrates a Hall element, voltage regulator, sleep-wake control, signal amplification and filtering, offset compensation, and a Schmitt trigger with a push-pull output. It operates from -40C to 85C with a supply voltage range of 1.65V to 6V and consumes
