Linear, Compass (ICs)
-
Magnetic Position Sensing IC Magn Tek MT9103A with Linear Output and Adjustable Sensitivity Settings
Product OverviewThe MT910X is a ratiometric linear Hall-effect IC with an analog output, designed for accurate position sensing in a wide range of applications. It operates from a 3.0V to 5.5V power supply and provides a linear output proportional to magnetic flux density. The device offers four sensitivity options to maximize output voltage swing based on the required sensing range. North and south magnetic poles produce unique voltages. Available in SOT-23 (Thin Outline)
-
Accurate Magnetic Flux Density Sensor Magn Tek MT9103ET Linear Hall Effect Device with Analog Output
Product OverviewThe Magntek MT910X is a ratiometric linear Hall-effect IC with an analog output, designed for accurate position sensing. It operates from a 3.0V to 5.5V power supply and provides an output proportional to magnetic flux density. The device offers four sensitivity options to maximize output voltage swing for various sensing ranges. It is available in SOT-23 (Thin Outline) and flat TO-92 packages, both RoHS compliant. Applications include home appliances,
-
Magnetic Position Sensor Magn Tek MT9102ET Linear Hall Effect IC with Analog Output and Sensitivity Variants
Product Overview of MT910X Ratiometric Linear Hall-Effect IC, Analog OutputThe MT910X is a linear Hall-effect IC designed for accurate position sensing. It provides an analog output proportional to magnetic flux density, operating from 3.0V to 5.5V. The device offers four sensitivity options for optimal output voltage swing and supports both North and South magnetic poles. Available in SOT-23 (Thin Outline) and flat TO-92 packages, all units are RoHS compliant. Applications
-
switching Littelfuse 59150-010 flange mount reed sensor with 10VA maximum power rating and compact design
Product Overview The Littelfuse 59150 Flange Mount Reed Sensor is a magnetically operated proximity sensor designed for position and limit sensing, security systems, linear actuators, and door switches. Its hermetically sealed, magnetically operated contacts ensure reliable operation even in contaminated environments, offering a long service life. The sensor features a versatile case design for screw or adhesive mounting and operates through non-ferrous materials. It is
-
hermetically sealed reed vane sensor Littelfuse 59085-040 for industrial process control applications
Product Overview The Littelfuse 59085 Vane Sensor is a reed vane sensor with an integrated actuator magnet, designed for position and limit sensing, security, linear actuator, industrial process control, and shaft rotation applications. Actuation occurs when a suitable low carbon steel vane passes through the slot between the magnet and switch. It offers a choice of normally open, normally closed, high voltage normally closed, or changeover contacts, capable of switching up
-
Littelfuse 59040 3 S 02 A press fit reed sensor operates through non ferrous materials for versatile
Product Overview The Littelfuse 59040 Press-Fit Firecracker Reed Sensor is a compact, cylindrical magnetically-operated proximity sensor designed for non-contact position and limit sensing, security, level sensing, and linear actuator applications. It features a press-fit installation that requires no additional mounting hardware, making it ideal for high-moisture and contaminated environments. The sensor operates through non-ferrous materials and offers a choice of normally
-
Littelfuse MITI 3V1 8 12.5 reed switch axial lead ultra miniature hermetically sealed glass envelope
Product Overview The MITI-3V1 is an ultra-miniature, normally open reed switch featuring a 7.00mm long x 1.80mm diameter glass envelope, capable of switching 170Vdc at 10W. It offers high insulation resistance of 10 ohms minimum and low contact resistance of less than 150 milliohms. This hermetically sealed switch requires zero operating power for contact closure and is ideal for switching micro-controller logic level loads. An equivalent surface mount version, the MISM-3V1,
-
Hall Effect Switch IC HXY MOSFET HCC6207MST with Integrated Voltage Regulator and CMOS Output Driver
Product OverviewThe HCC6207MST is a low-power, high-sensitivity, omnipolar Hall effect switch IC designed and manufactured using CMOS technology. It integrates a voltage regulator, Hall voltage generator, small signal amplifier, chopper stabilizer, Schmitt trigger, and CMOS output driver. This chip offers excellent temperature stability, strong stress resistance, and high sensitivity, operating within a voltage range of 2.5V-5.5V. It is available in a RoHS-compliant SOT-23-3L
-
Bipolar latching Hall switch HUAXIN HXU18UA with wide supply voltage range and high load current capability
HXU18 High Sensitivity, Bipolar Latching Hall Switch The HXU18 is a high-sensitivity, bipolar latching Hall switch manufactured using high-voltage Bipolar process technology. It integrates a voltage regulator, Hall voltage generator, differential amplifier, temperature compensation unit, Schmitt trigger, and an open-collector output stage. This Hall switch is designed to provide a digital voltage signal output in response to magnetic field intensity. It features built-in
-
Wide temperature range bipolar latching Hall switch HUAXIN HX6573 with halogen free compliant packaging
Product OverviewThe HX6573 is a high-sensitivity, bipolar latching Hall switch utilizing high-frequency chopping technology for excellent magnetic field consistency and symmetry across its operating voltage and temperature range. It integrates voltage regulation, Hall array, amplification, Schmitt trigger, and output stages. This technology minimizes offset voltage and its dependence on stress and temperature, while reducing system delay and output jitter. The HX6573 operates
-
Robust Littelfuse DRS-50-57-63 reed switch with tin plated Ni Fe wire leads and hermetic glass sealing
Product Overview The Littelfuse DRS-50 is a standard, normally open (SPST-NO) high power reed switch designed for demanding applications. It features a hermetically sealed glass envelope, ensuring reliable operation unaffected by its external environment. This switch is capable of high voltage and power switching, handling up to 400Vdc at 2mA, with a carry current of 6A and a maximum switching power of 100W/VA. Its high insulation resistance (1010 ohms minimum) and low
-
Analog output Hall effect sensor HUAXIN HX6639IUA-A for current motor control and position detection
Product OverviewThe HX6639 series are proportional linear Hall effect sensors with analog output, designed to provide a voltage output proportional to magnetic flux density. Featuring a wide operating voltage range, low power consumption, and low-noise output, these sensors offer a quiescent output at VCC/2, enabling detection of both North and South magnetic poles. Available in multiple sensitivity options and housed in SOT-23 and TO-92S packages, the HX6639 series are
