Switches (Solid State)
-
DIODES AH3382 P B Hall Effect sensor IC featuring chopper stabilized design for enhanced reliability
Product OverviewThe AH3382 is a high voltage, ultra-high sensitivity Hall Effect Unipolar switch IC designed for proximity, position, and level sensing in industrial and consumer home appliances. It operates over a wide supply range of 3.0V to 28V and features a chopper-stabilized architecture for temperature compensation and reliability. The device includes internal pull-up resistors, over-current limits, and Zener clamps for robustness. It activates with a South pole of
-
Magnetic Tamper Detection Solution DIODES AH1807-Z-7 Hall Effect Switch IC for Industrial Equipment
Product DescriptionThe AH1807 is a medium sensitivity, micropower Omnipolar Hall Effect switch IC designed for battery-powered consumer products, home appliances, and industrial equipment. It offers a reliable solution for applications like smart meter magnetic tamper detection. Optimized for battery and low-power applications, it operates from 2.5V to 5.5V and consumes only 24W at 3V. The single open-drain output switches on with either a North or South pole of sufficient
-
DIODES AH372 SA 7 Hall Effect Sensor with Wide Supply Voltage Range and High Temperature Tolerance
Product OverviewThe AH372 is a single-digital-output Hall-Effect latch sensor designed for high-temperature operation. It features an internal pull-up resistor, on-chip Hall voltage generator, amplifier, comparator with hysteresis for noise rejection, and an output driver. The device operates over a wide supply range with temperature compensation. It switches output ON when magnetic flux density exceeds the operating point (BOP) and switches OFF when the magnetic flux density
-
temperature stable stress resistant Hall effect switch ElecSuper MH253EUA for sensitive applications
Product OverviewThe MH253EUA is a temperature-stable, stress-resistant Hall-effect switch designed for high sensitivity applications. It features advanced CMOS wafer fabrication for low voltage requirements and minimal input offset errors. This device is ideal for replacing reed switches in high-duty cycle applications due to its solid-state reliability and superior high-temperature performance, achieved through dynamic offset cancellation with chopper stabilization. It
-
automotive Hall Effect switch DIODES AH3364Q-P-B with Zener clamps and temperature stability features
Product OverviewThe AH3364Q is an AEC-Q100 qualified, high voltage, medium sensitivity Hall Effect Unipolar switch IC designed for position and proximity sensing in automotive applications. It operates over a wide supply range of 3.0V to 28V and features a chopper-stabilized architecture for superior temperature stability and minimal switch point drift. The device offers a reliable solution for demanding automotive environments with built-in protection features like reverse
-
AECQ100 Qualified Hall Effect Unipolar Switch IC DIODES AH3369Q-SA-7 for Automotive Position Sensing
Product OverviewThe AH3369Q is an AECQ100 qualified, high voltage, low sensitivity Hall Effect Unipolar switch IC designed for position and proximity sensing in automotive applications. It operates over a wide supply range of 3.0V to 28V and features a chopper-stabilized architecture for temperature stability and minimal switch point drift. The device offers robust protection with a reverse blocking diode, Zener clamps on supply and output pins, and an over-current limit on
-
Diodes ah1809 p b micropower omnipolar hall effect switch ic designed for battery operated equipment
Product OverviewThe AH1809 is a low sensitivity, micropower Omnipolar Hall Effect switch IC designed for battery-powered consumer products, home appliances, and industrial equipment such as smart e-meters. It offers a reliable solution over its operating range due to its two Hall Effect plates and chopper-stabilized architecture. Optimized for battery and low-power applications, it operates from a 2.5V to 5.5V supply and consumes only 24W at 3V. The single open-drain output
-
Hall Effect Sensor IC DIODES AH3377-SA-7 with Wide Voltage Range and Enhanced Temperature Stability
Product OverviewThe AH3377 is a high voltage, low sensitivity Hall Effect Unipolar switch IC designed for proximity, position, and level sensing in industrial and consumer home appliances and personal care applications. It operates over a wide supply range of 3.0V to 28V, featuring chopper stabilization for temperature compensation and reliability. The device offers a single open-drain output that switches on with a sufficiently strong South pole magnetic field. It includes
-
Hall Effect omnipolar switch DIODES AH3574-P-A with wide voltage range and minimal switch point drift
Product OverviewThe AH3574 is a high voltage, high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position, and level sensing applications. It operates over a wide supply range of 3.0V to 28V and features a chopper-stabilized architecture for reliable performance across temperature variations. The device offers superior temperature stability, minimal switch point drift, and enhanced immunity to stress and RF noise. Its robust design includes reverse
-
Hall Effect omnipolar switch DIODES AH3582-P-B designed for industrial and consumer sensing applications
Product OverviewThe AH3582 is a high voltage, high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position, and level sensing in industrial and consumer home appliances. It operates over a wide supply range of 3.0V to 28V and features a chopper-stabilized architecture with an internal bandgap regulator for temperature compensation. The device offers robustness with a reverse blocking diode and Zener clamp on the supply, and an over-current limit with
-
Micropower Omnipolar Hall Effect Switch IC DIODES AH180N-ZG-7 for Portable Battery Powered Equipment
Product OverviewThe AH180N is a high-sensitivity, micropower Omnipolar Hall-Effect switch IC designed for portable and battery-powered equipment. It offers reliable performance over its operating range due to its two sensitive Hall-Effect plates and chopper-stabilized architecture. Optimized for low power consumption (24A at 3V) and a wide supply range (2.5V to 5.5V), its single open-drain output activates with either a North or South magnetic pole. The output switches on
-
consumption Omnipolar Hall Effect switch IC DIODES AH1921 W 7 suitable for IoT and consumer products
Product OverviewThe AH1911/AH1921 is an ultra-low power digital Omnipolar Hall Effect switch IC designed for battery-powered consumer products, utility meters, smoke detectors, and IoT devices. Its hibernating clocking system achieves an average supply current of only 1.6A at 3V. The wide supply voltage range (1.6V to 5.5V) enhances battery life and supports low-voltage microcontrollers. Featuring a chopper-stabilized design for superior stability and a high ESD level up to
