Switches (Solid State)
-
DIODES AH180 PG A MicroPower Hall Effect Sensor Switch with enhanced immunity to stress and RF noise
AH180 MicroPower Omnipolar Hall-Effect Sensor SwitchThe AH180 is a micro-power Omnipolar Hall-Effect switch designed for portable and battery-powered equipment such as cellular phones, PDAs, and portable PCs. It offers reliable performance across its operating range due to its dual Hall-Effect plates and chopper-stabilized architecture. Optimized for low power consumption (24W at 3V) and a wide supply voltage range (2.5V to 5.5V), the AH180 features a single open-drain output
-
Hall Effect switch DIODES AH1809-P-A designed for omnipolar magnetic field detection in industrial
Product OverviewThe AH1809 is a low sensitivity, micropower Omnipolar Hall Effect switch IC designed for battery-powered consumer products, home appliances, and industrial equipment like smart e-meters. It offers reliable performance over a wide operating range due to its two Hall Effect plates and chopper-stabilized architecture. Optimized for low power consumption, it operates from 2.5V to 5.5V and draws only 24W at 3V. The single open-drain output activates with either a
-
Hall Effect Sensor GoChip Elec Tech Shanghai GH1104ESW with Fast Switching Speed and No Signal Jitter
Product OverviewThe GH1104 series is a unipolar Hall effect position sensor designed for consumer and industrial electronic products. It features a wide operating voltage range, high output current, fast switching speed with no jitter, and a broad operating frequency (0-100KHz). The sensor offers long life, compact size, easy installation, and direct interface capability with logic circuits. It is suitable for applications involving rectangular or cylindrical magnets and is
-
Compact Omnipolar Hall Effect Sensor DIODES AH1902-FT4-7 with Internal Pull Up and Pull Down Features
Product OverviewThe AH1902 is a high-sensitivity, micropower Omnipolar Hall-effect switch IC designed for portable and battery-powered consumer electronics, as well as office equipment, home appliances, and industrial applications. It features internal pull-up and pull-down capability, an average supply current of 4.3A at 1.8V, and operates over a supply range of 1.6V to 3.6V. Its hibernating clocking system minimizes power consumption, and it is available in compact packages
-
omnipolar hall effect switch ic diodes ah1809-z-7 with operating voltage from 2.5 volts to 5.5 volts
Product OverviewThe AH1809 is a low sensitivity, micropower Omnipolar Hall Effect switch IC designed for battery-powered consumer products, home appliances, and industrial equipment like smart e-meters. It offers a reliable solution over its operating range due to its dual Hall Effect plates and chopper-stabilized architecture. Optimized for low power consumption, it operates from 2.5V to 5.5V and uses only 24W at 3V. The single open-drain output activates with either a North
-
Hall Effect Switch IC DIODES AH1903-FA-7 with Low Average Supply Current and Flexible Mode Selection
Product OverviewThe AH1903 is a high-sensitivity, micropower Hall-effect switch IC offering selectable Omnipolar or Unipolar operation. Designed for battery-powered devices and office/home appliances, it features a low average supply current of 4.3A at 1.8V and operates across a wide supply range of 1.6V to 3.6V. Its hibernating clocking system minimizes power consumption, and it is available in a compact X1-DFN1216-4 package. The Unipolar/Omnipolar mode can be selected via
-
High Sensitivity Omnipolar Hall Effect Switch DIODES AH3563Q-SA-7 with Overcurrent Output Protection
Product OverviewThe AH3563Q is an AEC-Q100 qualified, high-voltage, high-sensitivity Hall effect omnipolar switch IC designed for automotive position and proximity sensing applications. It operates from a wide supply voltage range of 3.0V to 28V and features a chopper-stabilized architecture for superior temperature stability and minimal switch point drift. The device offers robust protection with a reverse blocking diode, zener clamps on supply and output pins, and an
-
Magnetic Flux Density Switch with Hysteresis DIODES AH277AZ4-AG1 Integrated Hall Effect Latch Device
Product OverviewThe AH277A is an integrated Hall effect latch with complementary open-collector output drivers, designed for electronic commutation in brushless DC motor applications. It features an on-chip Hall sensor, amplifier, Schmitt trigger for noise rejection, and temperature compensation. The device provides two complementary outputs (DO and DOB) that switch based on magnetic flux density, with hysteresis for reliable operation. It includes an internal band-gap
-
Magnetic proximity sensor DIODES AH3372-SA-7 Hall Effect switch IC designed for operation in harsh industrial environments
Product OverviewThe AH3372 is a high voltage, high sensitivity Hall Effect Unipolar switch IC designed for proximity, position, and level sensing in industrial and consumer home appliances and personal care applications. Optimized for a wide supply range of 3.0V to 28V, it features a chopper-stabilized architecture and an internal bandgap regulator for temperature compensation, ensuring reliable operation. The device includes reverse blocking diode and Zener clamp on the
-
Temperature compensated Hall Effect latch sensor DIODES AH175-WG-7-A with internal band gap voltage regulator
Product OverviewThe AH175 is a single-digital-output Hall-Effect latch sensor designed for high-temperature operation. It features an on-chip Hall voltage generator, amplifier, comparator with hysteresis for noise rejection, and an open-collector output pre-driver. An internal band-gap regulator ensures a temperature-compensated supply voltage across a wide operating range. The device switches its output low when magnetic flux density exceeds the operate point (Bop) and
-
Ultra sensitive Hall effect switch DIODES AH1803 WG 7 ideal for cellular phones and cordless devices
Product OverviewThe AH1803 is a micropower, ultra-sensitive Hall effect switch designed for battery-operated handheld equipment. It features two Hall effect plates and a CMOS output driver, offering operation with either the north or south pole. With a low power consumption down to 24W, it is ideal for applications like cellular phones, PDAs, and cordless phones. The device provides superior temperature stability and extremely low switch-point drift, ensuring reliable
-
Hall Effect Sensor Diodes AH9247Z3-G1 Featuring Sleep Awake Logic and Magnetic Flux Density Detection
Product OverviewThe AH9247 is a high-sensitivity, micropower Hall-effect switch designed for battery-operated, handheld equipment. Featuring a chopper-stabilized amplifier for improved magnetic switch point stability and a sleep-awake logic to reduce average current consumption, this device offers efficient operation. The output latches its previous state during sleep mode, consuming only a few microamperes. It activates with either north or south pole of sufficient strength,
