Switches (Solid State)
-
Micropower Omnipolar Hall Effect Switch DIODES AH1902-FA-7 with Consumption and Wide Voltage Range
Product OverviewThe AH1902 is a high-sensitivity, micropower Omnipolar Hall effect switch IC designed for portable and battery-powered consumer and industrial applications. It features internal pull-up and pull-down capability, low average supply current (4.3A at 1.8V), and a wide operating supply range (1.6V to 3.6V). Its hibernating clocking system minimizes power consumption, and it is available in small, low-profile packages to save PCB space. The output is activated by
-
Micro power hall effect switch Cross chip CC6201TO featuring dynamic offset cancellation technology
CC6201 All-Polarity Micro-Power Hall Effect Switch The CC6201 is a micro-power, high-sensitivity, all-polarity Hall switch sensor with a latching output, designed to directly replace traditional reed switches. It is particularly suitable for battery-powered portable electronic products such as mobile phones, cordless phones, notebooks, and PDAs. The CC6201 features omnipolar magnetic field detection, meaning it activates with either the north or south pole of a magnet. The
-
Low voltage automotive hall effect latch switch DIODES AH1712Q-SA-7 with chopper stabilized architecture
Product OverviewThe AH1711Q/AH1712Q/AH1713Q/AH1714Q is an AEC-Q100 qualified low-voltage, high-sensitivity Hall effect latch IC designed for automotive applications such as brushless DC-motor commutation, speed measurement, and position sensing. Optimized for a 2.4V to 5.5V operating range, it features a chopper-stabilized architecture and internal bandgap regulator for reliable performance across the operating temperature range. The open-drain output switches based on
-
High Voltage Hall Effect Unipolar Switch DIODES AH3377-W-7 Suitable for Position and Level Sensing
Product OverviewThe AH3377 is a high voltage, low sensitivity Hall Effect Unipolar Switch IC designed for proximity, position, and level sensing applications in industrial and consumer home appliances. It operates over a wide supply range of 3.0V to 28V and features a chopper-stabilized architecture for excellent temperature stability and minimal switch point drift. The device offers robust protection with a reverse blocking diode and Zener clamps on supply and output pins,
-
Micro power hall sensor Cross chip CC6201ST with omnipolar magnetic detection and miniaturized packaging
Product OverviewThe CC6201 is a micro-power, high-sensitivity omnipolar Hall switch sensor device with a latching output, designed to directly replace traditional reed switches. It is particularly suitable for battery-powered portable electronic products such as mobile phones, cordless phones, notebook computers, and PDAs. The CC6201 features omnipolar magnetic field discrimination, meaning it can be activated by either the north or south pole of a magnetic field, and the
-
magnetic sensing IC Cross chip CC6103EST featuring integrated amplifier and power transistor output
Product OverviewThe CC6103E is a latching Hall-effect switch IC manufactured using advanced BiCMOS technology, offering excellent temperature stability and high resistance to mechanical stress, with a maximum operating temperature of 85C. It utilizes dynamic offset cancellation and proprietary temperature compensation technology to minimize offset voltage variations caused by packaging stress and ambient temperature changes, ensuring consistent magnetic sensitivity. The
-
DC AC current sensing Cross chip CC6922SG-5FB100-Q1 Hall effect sensor with 5000VRMS isolation voltage
Product OverviewThe CC6922-Q1 is a high-performance, reinforced isolation Hall-effect current sensor designed for efficient DC or AC current measurement. It offers high accuracy, excellent linearity, and temperature stability, making it suitable for industrial, consumer, and communication equipment. Key features include a low-resistance internal conductor (0.3m) for minimal power loss, 5000VRMS isolation voltage, high bandwidth up to 250kHz, and a fast fault monitoring
-
Micro Power Hall Effect Switch DIODES AH1815-P-B for Battery Powered Consumer and Industrial Devices
Product OverviewThe AH1815 is a low-sensitivity, micro-power Omnipolar Hall effect switch IC designed for portable and battery-powered consumer equipment, home appliances, and industrial applications such as smart-meter magnetic-tamper detection. It offers reliable performance over a wide operating range due to its chopper-stabilized architecture and two sensitive Hall effect plates. Optimized for low power consumption (24W at 3V), it operates from 2.5V to 5.5V and features a
-
Portable device compatible Hall effect switch IC DIODES AH1389-HK4-7 with low average supply current
Product OverviewThe AH1389 is a miniature micropower Hall effect switch IC with dual outputs, designed for portable, battery-powered consumer equipment, home appliances, and industrial applications. It operates from a supply voltage of 1.6V to 3.6V and features a sleep function for low average supply current. The AH1389 offers an 8kV ESD rating and is packaged in a small X2-DFN1410-4 package. A North pole activates Output1, while a South pole activates Output2, enabling
-
Digital push pull magnetic sensor COTO RR121-1B13-312 with omnipolar response and low current drain
Product Overview The RedRock RR121 Series is a digital push-pull magnetic sensor leveraging patented Tunneling Magnetoresistance (TMR) technology with integrated CMOS. It is designed for a wide range of applications including medical, industrial, automotive, and consumer electronics, enabling functions such as proximity sensing, rotary sensing, and level detection. The RR121 offers selectable operate sensitivities from 9 G to 70 G and supports omnipolar, unipolar, or bipolar
-
Full polarity hall switch Cross chip CC6207ST ideal for portable electronics pdas laptops and bluetooth headsets
Product DescriptionThe CC6207 is a micro-power, ultra-sensitive, full polarity Hall switch with a latching output, designed to directly replace traditional magnetic reed switches. It is ideal for battery-powered portable electronic devices such as mobile phones, laptops, Bluetooth headsets, and forehead temperature guns. The device is fully polarized for magnetic field discrimination, activating with either the north or south pole and switching off when the field is withdrawn
-
Portable electronic hall sensor Cross chip CC6201EST full polarity switch with low switch point drift
Product OverviewThe CC6201E is a micro-power, ultra-sensitive, full-polarity Hall effect switch designed to replace traditional magnetic reed switches. It is ideal for battery-powered portable electronic devices, responding to both North and South magnetic poles without requiring specific pole identification during assembly. Its advanced BiCMOS technology and dynamic offset cancellation ensure superior temperature stability and low switch-point drift. The device integrates a
