Switches (Solid State)
-
Integrated Hall Effect Latch Sensor DIODES AH374-W-7 for Brushless DC Motor Commutation Applications
AH374 Single Phase Hall Effect LatchThe AH374 is an integrated Hall-Effect latched sensor designed for electronic commutation of brush-less DC motor applications. It features an on-chip Hall voltage generator, a comparator for Hall voltage amplification, and a Schmitt trigger for noise rejection. ...
-
Omnipolar digital magnetic sensor COTO RR122-1E73-511 with wide temperature range and consumption
Product Overview The RedRock RR122-1E72-511 and RR122-1E73-511 are digital magnetic sensors leveraging patented Tunneling Magnetoresistance (TMR) technology with integrated CMOS. These omnipolar sensors are designed for a wide array of applications including medical, industrial, automotive, and ...
-
High Sensitivity Hall Effect Latch Diodes AH3712-W-7 for Accurate Position Sensing and Motor Control
AH3712 High-Voltage, High-Sensitivity Hall Effect LatchThe AH3712 is a high-voltage, high-sensitivity Hall-effect latch IC designed for commutation of brushless DC motors, flow meters, linear encoders, and position sensors in industrial and consumer home appliance and personal care applications. ...
-
magnetic sensor Cross chip CC6121TO orthogonal dual output Hall effect switch for automotive and industrial applications
Product OverviewThe CC6121 is an orthogonal dual-output, low-temperature drift bipolar latch type Hall effect switch. It integrates two independent channel Hall devices with a fixed relative position (0.5um error accuracy) and signal processing circuits, addressing consistency issues in fine-pitch ...
-
Micropower Hall effect switch DIODES AH1893-Z-7 designed for home appliances and portable electronics
Product OverviewThe AH1893 is a high sensitivity, micropower, omnipolar Hall-effect switch IC designed for portable and battery-powered devices. It features internal pull-up and pull-down capabilities, operating over a supply range of 1.6V to 3.6V with an average supply current of only 4.3A at 1.85V...
-
Digital Push Pull Magnetic Sensor COTO RR122-1A52-511 Featuring Low Current Drain and TMR Technology
RedRock RR122 Series TMR Digital Push-Pull Magnetic Sensors Product Overview The RedRock RR122-1A52-511 and RR122-1A53-511 are advanced digital magnetic sensors leveraging patented Tunneling Magnetoresistance (TMR) technology with seamless CMOS integration. These sensors are designed for high...
-
Hall effect latch sensor DIODES AH173-PG-B-B suitable for high temperature operation and RPM detection
Product OverviewThe AH173 is a single-digital-output Hall effect latch sensor designed for high-temperature operation. It features an internal pullup resistor, an on-chip Hall voltage generator, amplifier, comparator with hysteresis, and an output driver. The device offers a wide operating supply ...
-
Digital Magnetic Sensor COTO RR122-1A53-511 with Average Current Drain of 1 Milliampere at 250 Hertz
Product Overview The RedRock RR122-1A52-511 and RR122-1A53-511 are digital magnetic sensors utilizing patented Tunneling Magnetoresistance (TMR) technology with seamless CMOS integration. These sensors are designed for a wide range of applications including medical, industrial, automotive, and ...
-
Battery powered portable electronic devices Cross chip CC6207TO micro power ultra sensitive Hall switch
Product DescriptionThe CC6207 is a micro-power, ultra-sensitive, full polarity Hall switch with a latching output, designed to directly replace traditional magnetic reed switches. It is ideal for battery-powered portable electronic devices such as mobile phones, laptops, Bluetooth headsets, and ...
-
Micro power hall switch sensor Cross chip CC6203ST with dynamic offset cancellation and latch output
Product OverviewThe CC6203 is a micro-power, high-sensitivity, omnipolar Hall switch sensor device with a latching output, designed to directly replace traditional magnetic reed switches. It is particularly suitable for battery-powered portable electronic products such as mobile phones, cordless ...
-
Battery digital unipolar hall effect switch ic DIODES AH1383 HK4 7 with hibernating clocking system
Product Overview The AH1381/AH1382/AH1383 is an ultra-low power digital Unipolar Hall-effect switch IC designed for battery-powered consumer products, meters, smoke detectors, and IoT devices. Its hibernating clocking system achieves an average supply current of 1.6A at 3V. The wide supply voltage ...
-
Micropower hall effect switch Cross chip CC6211ETO optimized for pda and instrumentation applications
Product OverviewThe CC6211E is a micropower, ultra-sensitive, unipolar Hall effect switch designed for various sensing applications. It features advanced Bi-CMOS processing for optimized circuit structure, dynamic offset cancellation for improved consistency, and a miniaturized packaging process for ...
