Compass, Magnetic Field (Modules)
-
Digital Hall effect sensor Honeywell SS311PT designed to reduce system cost in rotary sensing systems
Product OverviewThe SS311PT/SS411P are versatile digital Hall-effect position sensors designed to detect alternating North and South poles. These bipolar sensors offer enhanced sensitivity, enabling the use of smaller magnets and reducing system costs. An integrated pull-up resistor simplifies interfacing with common electronic circuits, further minimizing external component requirements. Their economical design makes them suitable for high-volume, cost-sensitive rotary
-
3 Pin Inline Sensor IC Honeywell 2SS52M Digital Magnetoresistive Sensor Series with U Pack Package Style
Product OverviewThe 2SS52M Series Digital Magnetoresistive Sensors are omnipolar, solid-state sensors featuring an integrated magnetoresistive bridge on silicon within a plastic package. These sensors respond to very low magnetic fields, activating with either a North or South magnetic pole, simplifying installation and doubling resolution in rotating magnet applications. They are ideal for flow metering, motor RPM, and cylinder position sensing due to their small size and
-
Digital output Hall effect sensor Infineon TLE4966GHTSA1 designed for accurate speed and direction measurement
Product Overview The TLE4966G is a high-precision Hall-effect switch designed for applications requiring accurate speed and direction detection. It operates over a wide supply voltage range (2.7 V to 24 V) and is built for robust performance with features like Active Error Compensation for high resistance to mechanical stress and superior temperature stability, allowing peak temperatures up to 195C without damage. The device provides digital output signals for both speed and
-
Digital Hall Effect Sensor Honeywell SS513GT with Bipolar Latching and Unipolar Magnetic Options
Product OverviewThe SS400 Series and SS500 Series are versatile digital Hall-effect sensors operated by magnetic fields. They are designed to respond to alternating North and South poles, or a South pole only, offering bipolar, latching, or unipolar magnetic options. With on-board regulation, they provide stable operation across a wide supply voltage range (3.8 Vdc to 30 Vdc) and feature a continuous 20 mA sinking output, expandable to 50 mA max. Their digital, open collector
-
Honeywell FF5 21 DC 10 non contact safety switch with compact rectangular design and pre wired cable
Honeywell FF5 Series Non-Contact Safety SwitchesThe Honeywell FF5 Series are magnetically actuated, non-contact, pre-wired safety switches designed for machine guarding applications. They monitor guard positions and provide inputs to safety relays. Their compact, rectangular design allows for installation in limited spaces, while the non-contact operation accommodates guard misalignment. Available with ABS plastic or 316 Series stainless steel housings, these switches are
-
speed and position sensing device Honeywell SM451R magnetoresistive sensor ic with wide voltage range
Product OverviewHoneywell's Magnetoresistive Sensor ICs, Standard Power Series (SM351RT, SM451R, SM353RT, SM453R) are ultra-sensitive, solid-state devices designed for durable and reliable speed or position sensing in standard power applications (3 Vdc to 24 Vdc). Offering ultra-high sensitivity (up to 11 G max.), these sensors respond to either pole of a magnet, simplifying installation and reducing system costs. Their non-contact, no-glass design enhances switching
-
Honeywell SNG-SPRD-004 speed sensor offering wide frequency range and operation under harsh conditions
Honeywell SNG-S Series Speed SensorsThe Honeywell SNG-S Series Speed Sensors utilize a magnetically biased Hall-effect integrated circuit (IC) to accurately detect the movement of ferrous metal targets. These sensors are sealed in rugged, probe-type packages and provide a digital pulse output proportional to the target's speed. They offer enhanced reliability with IP69K rating, EMC immunity, and a wide operating temperature range. Designed for cost-competitiveness and
-
Bipolar Hall effect latch sensor Infineon TLE4946K with on chip active compensation and high ESD performance
TLE4946K High Precision Bipolar Hall-Effect Latch Sensor Product Overview The TLE4946K is an integrated circuit Hall-effect sensor designed for highly accurate applications. It features precise magnetic switching points and high temperature stability achieved through on-chip active compensation circuits and chopper techniques. The sensor operates from a wide supply voltage range of 2.7 V to 24 V, is reverse battery protected, and offers superior temperature stability with
-
Digital Hall Effect Sensor Honeywell SS411A-T2 with Bipolar Latching and Unipolar Magnetic Configurations
Product OverviewThe SS400 Series and SS500 Series are versatile digital Hall-effect sensors operated by magnetic fields. They are designed to respond to alternating North and South poles, or to a South pole only, and are available in bipolar, latching, or unipolar magnetic configurations. These sensors offer stable operation over a wide temperature range and supply voltage, with an easily interfaced digital open collector sinking output. High sensitivity versions are
-
Digital Hall effect sensor IC Honeywell SS460P with built in pull up resistor providing fast latch response and stable output
Product OverviewThe SS360PT, SS460P, and SS460P-T2 are high sensitivity, latching digital Hall-effect sensor ICs with integrated pull-up resistors. Designed for reliable switching, they respond to alternating North and South poles, offering a clean output signal and fast latch response without chopper stabilization. These economical sensors are suitable for high-volume, cost-sensitive applications, providing reverse polarity protection and stable output over a wide temperatur
-
Accurate speed detection sensor Honeywell SNG-SPRC-002 with digital pulse output and O ring sealing
Product OverviewHoneywell's SNG-S Series Speed Sensors utilize a magnetically biased Hall-effect integrated circuit (IC) to accurately detect the movement of ferrous metal targets. These sensors are sealed in rugged, probe-type packages and detect changes in magnetic flux density caused by nearby ferrous metal. They provide a digital pulse output proportional to target speed, making them ideal for applications requiring precise speed measurement. The series offers higher
-
Industrial magnetoresistive sensor ic Honeywell SM353RT with ultra sensitivity and wide voltage range
Product OverviewHoneywell's Magnetoresistive Sensor ICs, Standard Power Series (SM351RT, SM451R, SM353RT, SM453R) are ultra-sensitive, solid-state devices designed for durable and reliable speed or position sensing in standard power (3 Vdc to 24 Vdc) applications. Offering the highest sensitivity in their class (up to 11 G max.), these sensors operate with either North or South pole, simplifying installation and reducing system costs. Their non-contact, no-glass design
