Switches (Solid State)
-
dual output Hall effect switch Diodes AH1390-HK4-7 designed for portable and industrial applications
Product OverviewThe AH1390 is an ultra-sensitive, micropower, dual-output unipolar Hall effect switch IC designed for portable, battery-powered consumer electronics, home appliances, and industrial applications. It operates from a wide supply voltage range of 1.6V to 3.6V and features a low average supply current of 1.3A at 1.85V due to its sleep function. The AH1390 offers independent detection for North and South poles, with Output1 activating for a North pole and Output2
-
Diodes ah3772 sa 7 hall effect latch ic featuring stable switching and overcurrent limit protection
Product OverviewThe AH3772 is a high-voltage, high-sensitivity Hall Effect latch IC designed for commutation of brushless DC motors, flow meters, linear encoders, and position sensors in industrial and consumer home appliances and personal care applications. It operates over a supply range of 3.0V to 28V and features a chopper-stabilized architecture for superior temperature stability and minimal switch-point drift. The device offers robustness with a reverse-blocking diode
-
DIODES AH1912 FA 7 digital Omni polar Hall Effect switch IC featuring ultra and high ESD protection
Product OverviewThe AH1912 is an ultra-low power digital Omni-polar Hall Effect switch IC designed for battery-powered consumer products, utility meters, smoke detectors, and IoT devices. Its hibernating clocking system ensures an average supply current of only 1.6A at 3V. The wide supply voltage range (1.6V to 5.5V) enhances battery life and supports low-voltage microcontrollers. Featuring advanced chopper stabilization for superior temperature and supply voltage stability,
-
Dual Latching Hall Effect Sensor with Operating Voltage Range 2.8 to 24V GoChip Elec Tech Shanghai GH1881
GH1881 Dual Latching Hall Effect Position SensorThe GH1881 is a magnetic sensor integrated circuit designed using CMOS process technology. It comprises a voltage regulator, a Hall sensor with a dynamic offset compensation system, a small signal amplifier, a Schmitt trigger, and a drain open output driver. This sensor converts magnetic induction intensity into a switch-type digital voltage signal, suitable for operation with rectangular or cylindrical magnets. The output is
-
Diodes AH1388 HK4 7 dual output miniature hall effect switch ic for portable and industrial equipment
Product Description The AH1388 is an ultra-sensitive, miniature micropower dual-output unipolar Hall effect switch IC designed for portable, battery-powered consumer equipment, home appliances, and industrial applications. It operates across a wide supply voltage range (1.6V to 3.6V) and features a sleep function for low average supply current (12A at 1.85V). The device minimizes PCB space with its small X2-DFN1410-4 package. Output1 activates with a sufficient North pole,
-
Automotive position proximity sensing ic with thermal protection DIODES AH3280Q-P-A unipolar switch
Product OverviewThe DIODES AH3241Q-AH3244Q/AH3280Q-AH3282Q are high voltage, high sensitivity, two-wire Hall Effect Unipolar/Latch switch ICs with integrated self-diagnostics and automotive-compliant AEC-Q100 qualification. Designed for position and proximity sensing in automotive applications, these devices operate over a wide supply range of 2.7V to 27V. Key features include a chopper-stabilized architecture, integrated bandgap regulator for temperature compensation,
-
Micropower omnipolar hall effect switch ic diodes ah1809-w-7 with single open drain output and consumption
Product OverviewThe AH1809 is a low sensitivity, micropower Omnipolar Hall Effect switch IC designed for battery-powered consumer products, home appliances, and industrial equipment like smart e-meters. It offers a reliable solution over its operating range due to its dual Hall Effect plates and chopper-stabilized architecture. Optimized for battery and low-power applications, it operates from 2.5V to 5.5V and consumes only 24W at 3V. The single open-drain output switches low
-
DIODES AH180 WG 7 Omnipolar Hall Effect Sensor Switch for Portable Devices Cellular Phones and PDAs
AH180 MicroPower Omnipolar Hall-Effect Sensor SwitchThe AH180 is a micro-power Omnipolar Hall-Effect switch designed for portable and battery-powered equipment such as cellular phones, PDAs, and portable PCs. It utilizes two Hall-Effect plates and a chopper-stabilized architecture for reliable performance across its operating range. Optimized for low power consumption, it operates from a 2.5V to 5.5V supply and consumes only 24W at 3V. The single open-drain output activates
-
Stable performance Hall Effect omnipolar switch IC DIODES AH3582-P-A with internal bandgap regulator
Product OverviewThe AH3582 is a high voltage, high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position, and level sensing. Optimized for a wide supply range of 3.0V to 28V, it features a chopper-stabilized architecture and internal bandgap regulator for stable performance across temperature variations. The device includes reverse blocking diode, Zener clamp on supply and output, and over-current limit for enhanced robustness. Its internally pulled-up
-
Diodes ah1806 p b omnipolar hall effect switch ic with operating voltage from 2.5 volts to 5.5 volts
Product OverviewThe AH1806 is a high-sensitivity, micro-power Omnipolar Hall effect switch IC designed for portable, battery-powered consumer, home appliance, and industrial applications. It offers reliable performance across its operating range due to its sensitive Hall effect plates and copper-stabilized architecture. Optimized for low power consumption (24W at 3V), it operates from 2.5V to 5.5V and features a single open-drain output switchable by either North or South
-
magnetic field sensor Cross chip CC6207MST featuring latch module and voltage regulator for stability
Product Overview The CC6207M is a low-power, high-sensitivity, omnipolar Hall effect switch sensor with latching output, designed to directly replace traditional reed switches. It is particularly suitable for battery-powered portable electronic devices such as mobile phones, cordless phones, notebooks, and PDAs. The CC6207M offers omnipolar magnetic field detection, responding to both north and south poles, simplifying assembly. Its internal circuitry includes a Hall element,
-
Diodes ah3363q p b unipolar hall effect switch ic for seat and seatbelt buckle detection in vehicles
Product OverviewThe AH3363Q is an AECQ100 qualified high voltage, high sensitivity Hall Effect Unipolar switch IC designed for position and proximity sensing in automotive applications. It operates over a wide supply range of 3.0V to 28V and features a chopper-stabilized architecture for superior temperature stability and minimal switch point drift. The device offers robust protection with a reverse blocking diode and Zener clamps on supply and output pins, along with an over
