Switches (Solid State)
-
AECQ100 Qualified Hall Effect Omnipolar Switch IC DIODES AH3564Q-P-A for Automotive Position Sensing
Product OverviewThe AH3564Q is an AECQ100-qualified, high-voltage, high-sensitivity Hall effect omnipolar switch IC designed for position and proximity sensing in automotive applications. It operates over a wide supply range of 3.0V to 28V and features a chopper-stabilized architecture for reliable performance across temperature variations. The device offers robust protection with a reverse blocking diode, zener clamp on the supply, and an overcurrent limit on the output. Its
-
Magnetic Flux Sensor DIODES AH3373-SA-7 Hall Effect Switch IC with Zener Clamps and Open Drain Output
Product OverviewThe AH3373 is a high voltage, high sensitivity Hall Effect Unipolar Switch IC designed for proximity, position, and level sensing in industrial, consumer home appliances, and personal care applications. Optimized for a wide supply range of 3.0V to 28V, it features a chopper-stabilized architecture and an internal bandgap regulator for temperature-compensated performance. The device offers robust protection with a reverse blocking diode, Zener clamps on the
-
Unipolar Hall Position Sensor GoChip Elec Tech Shanghai GH1210KUA with Open Drain Output and Wide Voltage Range
Product OverviewThe GH1200 Series is a unipolar Hall effect position sensor designed with CMOS technology. It integrates a voltage regulator, Hall sensor with dynamic offset compensation, small signal amplifier, Schmitt trigger, and an open-drain output driver. This sensor outputs a digital voltage signal suitable for use with rectangular or cylindrical magnets. It features a wide operating voltage range and is ideal for various consumer and industrial electronic applications
-
DIODES AH1802 WG 7 hall effect sensor switch micropower design with chopper stabilized architecture
Product OverviewThe AH1802 is a micropower, ultra-sensitive omnipolar Hall-effect sensor switch designed for portable and battery-powered devices. It offers reliable performance across a wide operating range due to its chopper-stabilized architecture and sensitive Hall Effect plates. Optimized for low power consumption (24W at 3V), it features a single open-drain output that switches ON with either a north or south magnetic pole. Ideal for applications requiring contactless
-
Digital Hall effect sensor ElecSuper ES3144EUA designed for operation in position and motion detection
Product OverviewThe ES3144EUA is a small, versatile digital Hall-effect sensor designed for cost-sensitive position and motion sensing applications. It operates from a wide supply voltage range of 4.5Vdc to 24Vdc and is unipolar, responding to either the North or South magnetic pole. Its robust design allows operation up to 85C, and it features built-in reverse voltage protection. This sensor is well-suited for applications such as shift selectors, wiper end/home position,
-
Brushless DC motor sensor DIODES ATS177-PG-B-A with wide operating voltage and temperature compensation
Product OverviewThe ATS177 is an integrated Hall-Effect latch sensor designed for electronic commutation in brush-less DC motor applications. It features an on-chip Hall voltage generator, comparator, and Schmitt trigger for noise rejection, with an open-collector output. The device offers a wide operating supply range with temperature compensation and built-in reverse polarity protection. It switches the output ON when magnetic flux density exceeds the operate point (Bop)
-
automotive Hall Effect sensor DIODES AH3234Q-P-A with wide voltage range and built in protection features
Product OverviewThe DIODES AH3231Q-AH3234Q/AH3270Q-AH3272Q are high voltage, high sensitivity, two-wire Hall Effect Unipolar/Latch switch ICs designed for position and proximity sensing in demanding automotive applications. They offer a wide supply voltage range (2.7V to 27V), chopper-stabilized architecture for superior temperature stability and immunity to stress, and built-in protection features including reverse blocking diode, Zener clamp, thermal protection with auto
-
Single phase Hall effect latch with noise rejection and integrated output driver DIODES AH477AZ4 BG1
Product OverviewThe AH477A is a single-phase Hall effect latch with an integrated H-bridge output driver, designed for brushless DC motor applications. It features an on-chip Hall sensor, amplifier, comparator for noise rejection, and bi-directional drivers for high current loads. An internal bandgap regulator ensures temperature compensation and a wide operating voltage range. The device switches output states based on magnetic flux density thresholds, making it suitable for
-
Micropower Omnipolar Hall Effect Switch IC DIODES AH1807-W-7 for Battery Powered Consumer Products
Product DescriptionThe AH1807 is a medium sensitivity, micropower Omnipolar Hall Effect switch IC designed for battery-powered consumer products, home appliances, and industrial equipment. It excels in applications like smart meter magnetic tamper detection. Utilizing two Hall Effect plates and a chopper-stabilized architecture, it ensures reliable performance across its operating range. Optimized for battery and low-power applications, it operates from 2.5V to 5.5V and
-
Magnetic field sensor DIODES AH3522-SA-7 with wide supply voltage range and stable output performance
Product OverviewThe AH3522/AH3524 is a high-voltage, high-sensitivity Hall-effect omnipolar switch IC designed for proximity, position, and level sensing applications. It operates over a wide supply range of 3.0V to 28V and features a chopper-stabilized architecture for reliable performance across temperature variations. The device offers a robust solution with integrated protection features like a reverse blocking diode and Zener clamps. Its single open-drain output
-
Low voltage dual unipolar hall effect switch DIODES AH1889-Z-7 with fast response and compact design
AH1889 High Sensitivity Dual Unipolar Hall-Effect SwitchThe AH1889 is a high sensitivity dual output Unipolar Hall effect IC designed for low voltage applications requiring quick response times. It can independently detect either a North or South pole and switch one of its two outputs, featuring internal pull-up and pull-down capabilities. This compact device operates over a supply voltage range of 1.65V to 3.6V and is housed in a small, low-profile SOT553 package to minimize
-
Micropower Omnipolar Hall Effect Switch IC DIODES AH180N WG 7 for Portable Battery Powered Equipment
Product OverviewThe AH180N is a high-sensitivity, micropower Omnipolar Hall-Effect switch IC designed for portable and battery-powered equipment. It offers reliable performance over a wide operating range with low power consumption. The single open-drain output activates with either a North or South magnetic pole, making it suitable for various sensing applications.Product AttributesBrand: Diodes IncorporatedCertifications: Totally Lead-Free & Fully RoHS Compliant, Halogen
