Switches (Solid State)
-
Wheel speed monitoring sensor Infineon TLE4941-1C with digital circuit and offset calibration features
Product Overview The TLE4941-1 and TLE4941-1C are differential two-wire Hall Effect sensor ICs designed for wheel speed applications. These sensors track the magnetic input signal, monitoring it within a digital circuit. They are suitable for applications requiring reliable speed detection, with features that adapt to signal amplitude and initial offset during startup. The devices transition from an uncalibrated mode, where offset is determined by peak detection, to a
-
Micropower Omnipolar Digital Hall Effect Sensor Honeywell SL353LT with Consumption and Simplified Installation
Product OverviewThe Honeywell SL353 Series Micropower Omnipolar Digital Hall-effect Sensor ICs are compact and versatile devices designed for applications requiring low power consumption. They operate with either a North or South magnetic pole, simplifying installation. Utilizing BiCMOS technology and a duty cycle timing circuit, these sensors significantly reduce average current draw, making them ideal for battery-operated equipment. Available in high (SL353HT) and very low
-
Temperature compensated Hall effect position sensor Honeywell SS413F bipolar medium gauss output
Product OverviewThe SS400F and SS400G Series are versatile digital Hall-effect sensors designed for magnetic field operation. They respond to alternating North and South poles or to a South pole only, with bipolar, latching, and unipolar magnetic options available. Featuring band gap regulation for stable operation across a 3.8 Vdc to 30 Vdc supply voltage range, these sensors offer a continuous 20 mA sinking output, with a maximum cycle capability of 50 mA. Their 3.8 V
-
Digital Hall Effect Sensor IC Honeywell SS461A with Bipolar Latching and Unipolar Magnetic Configurations
Product OverviewThe SS400 Series and SS500 Series are versatile, digital Hall-effect sensor ICs designed for operation by magnetic fields from permanent magnets or electromagnets. They respond to alternating North and South poles, or to a South pole only, and are available in bipolar, latching, or unipolar magnetic configurations. Featuring on-board regulation for stable operation across a wide supply voltage range (3.8 Vdc to 30 Vdc), these sensors offer a continuous 20 mA
-
Industrial Magnetic Sensor Honeywell SS411A Digital Hall Effect IC for Accurate Magnetic Detection
Product OverviewThe SS400 Series and SS500 Series are versatile digital Hall-effect sensor ICs designed to operate with magnetic fields from permanent magnets or electromagnets. They offer stable operation over a wide temperature range and supply voltage, with a digital open-collector sinking output for easy interfacing. These sensors are available in bipolar, latching, or unipolar magnetic configurations, suitable for a broad range of industrial, transportation, and medical
-
Honeywell SS443R Hall effect sensor with hysteresis of 50 Gauss and typical operate point at 135 Gauss
Product OverviewThe SS340RT/SS440R Series are small, versatile unipolar digital Hall-effect sensor ICs designed to operate with a single magnetic pole (North for SS340RT, South for SS440R). They offer robust IC design with ESD Class 2, reverse polarity protection, and 150 C capability. Available in multiple magnetic sensitivities and two package styles (SOT-23 for SS340RT, TO-92 for SS440R), these sensors are suitable for a wide range of applications including motion control,
-
Unipolar digital Hall effect sensor Honeywell SS343RT for magnetic field switching applications
Product OverviewThe SS340RT/SS440R are unipolar digital Hall-effect sensor ICs designed for sensing and control applications. They offer reliable switching based on magnetic field strength.Product AttributesBrand: HoneywellProduct Series: SS340RT/SS440RTechnical SpecificationsCharacteristicConditionMin.Typ.Max.UnitSupply voltageSS340RT312VdcSS340RT324VdcSS440R324VdcSupply currentVsupply = 5 V at 25 C [77 F]46mAVsupply = 3 V at 25 C [77 F]3.55mAVsat20 mA, Gauss >Bop0
-
Hall effect latch Infineon TLE4946-2K with wide voltage operation and superior temperature stability
Product Overview The TLE4946-2K is a high-precision Hall effect latch designed for demanding applications requiring accurate magnetic switching thresholds up to 150C. It features a wide supply voltage range (2.7V to 24V), operation from unregulated power supplies, and superior temperature stability. Its active error compensation and chopper techniques ensure high accuracy and resistance to mechanical stress. The device offers a digital output signal with 20mA current sink
-
Honeywell VF360NT Hall effect sensor IC with wide supply voltage range and performance certification
Product OverviewThe VF360NT, VF360ST, and VF460S are high sensitivity latching digital Hall-effect sensor ICs from Honeywell. These versatile devices are operated by magnetic fields from permanent magnets or electromagnets, responding to alternating North and South poles. The VF360NT activates with a North pole, while the VF360ST and VF460S activate with a South pole. Unlike competitive sensors that use chopper stabilization, these ICs feature a non-chopper-stabilized design,
-
Automotive rotation speed sensor Infineon TLE4966V-1K with vertical dual Hall effect latch technology
TLE4966V-1K: In-Plane Sensing with Vertical Dual Hall Effect Latch for Automotive Applications Product Overview The TLE4966V-1K is a Vertical Dual Hall Effect Latch designed for automotive applications, specifically for detecting the rotation direction and speed of a pole wheel. Its unique in-plane sensing capability allows for parallel mounting of the magnetic encoder and sensor, even at high distances, ensuring accurate direction detection. This AEC Q100 certified device
-
Bipolar digital Hall effect sensor IC Honeywell SS41G for position speed and current magnetic sensing
Product OverviewThe SS41G is a low-cost, bipolar digital Hall-effect sensor IC designed for various sensing applications. It offers reliable operation within a wide temperature range and supply voltage. This sensor is suitable for applications requiring magnetic switching, such as position sensing, speed sensing, and current sensing.Product AttributesBrand: HoneywellCertifications: JEDEC JS-001 (ESD Human Body Model)Technical SpecificationsCharacteristicConditionMin.Typ.Max
-
Heavy duty Honeywell SNG-SPRC-003 speed sensor with PBT thermoplastic carrier and housing materials
Honeywell SNG-S Series Speed SensorsThe Honeywell SNG-S Series Speed Sensors utilize a magnetically biased Hall-effect integrated circuit (IC) to accurately detect the movement of ferrous metal targets. These sensors are sealed in rugged, probe-type packages and are designed to provide a digital pulse output proportional to the target speed. Key advantages include higher reliability due to IP69K rating, EMC immunity, and a wide operating temperature range, cost-competitivenes
