Linear, Compass (ICs)
-
consumption Hall Effect switch DIODES AH1802-FJG-7 suitable for portable and battery powered equipment
Product OverviewThe AH1802 is a high-sensitivity, micropower, omnipolar Hall Effect switch IC designed for portable and battery-powered equipment. It offers reliable performance over a wide operating range due to its sensitive Hall Effect plates and chopper-stabilized architecture. Optimized for low power consumption (24W at 3V), it features a single open-drain output that switches on with either a north or south magnetic pole. The device is suitable for various detection
-
Automotive Hall Effect switch DIODES AH3391Q-SA-7 offering low sensitivity operation and Zener clamp protection
Product OverviewThe AH3391Q is an AECQ100 qualified, high voltage, low sensitivity Hall Effect Unipolar switch IC designed for automotive position and proximity sensing applications. It operates over a wide supply range of 3.0V to 28V and features a chopper-stabilized architecture for superior temperature stability and minimal switch point drift. The device offers a reliable solution with an open-drain output, over-current limit, and Zener clamp protection. It is activated by
-
Digital omnipolar Hall effect switch IC DIODES AH1913 FA 7 with superior stability over temperature
Product OverviewThe AH1913 is an ultra-high sensitivity, digital-omnipolar Hall-effect switch IC designed for battery-powered consumer products and IoT devices. Its hibernating clocking system ensures a low average supply current of 12A at 1.8V. It operates across a wide supply voltage range (1.6V to 5.5V) and features a chopper-stabilized design for superior stability over temperature and supply voltage variations. The device offers high ESD capability up to 6kV and is
-
Diodes ah1806 w 7 micro power hall effect switch ic sensitive to both north and south magnetic poles
Product OverviewThe AH1806 is a high-sensitivity, micro-power Omnipolar Hall effect switch IC designed for portable, battery-powered consumer, home appliance, and industrial applications. It offers reliable magnetic tamper detection and position sensing with a single open-drain output. Optimized for low power consumption (24W at 3V), it operates from 2.5V to 5.5V and is sensitive to both North and South magnetic poles.Product AttributesBrand: Diodes IncorporatedCertifications
-
bipolar Hall effect sensor GoChip Elec Tech Shanghai GH41F045-B2 for consumer and industrial electronics
Product OverviewThe GH141F is a high-temperature bipolar Hall effect latching position sensor designed for consumer and industrial electronic products. It features a wide operating voltage range, high output current, fast switching speed without jitter, and a wide operating frequency. Its compact size, long lifespan, and ease of installation make it suitable for direct interfacing with logic circuits. The sensor is built with an internal voltage regulator, Hall voltage
-
Industrial Hall Effect Unipolar Switch IC DIODES AH3376-SA-7 with High Voltage and Low Sensitivity
Product OverviewThe AH3376 is a high voltage, low sensitivity Hall Effect Unipolar switch IC designed for proximity, position, and level sensing in industrial and consumer applications. It operates over a wide supply range of 3.0V to 28V and features a chopper-stabilized architecture for temperature compensation and reliability. The device includes protection mechanisms such as a reverse blocking diode and Zener clamps on the supply and output pins. Its single open-drain
-
Amp Comparator with Current Sinking Output COSEMITECH CH464ANTB Magnetic Sensing Switching Device
Product OverviewThis document describes an Amp Comparator with current sinking output, available in SOT-23-3L and TO-92S packages. It is designed for applications requiring magnetic sensing and switching, with parameters such as supply current, output saturation voltage, output leakage current, and magnetic thresholds (BOP, BRP) clearly defined.Product AttributesCDM (charged device mode) according to JEDEC EIA/JESD22-C101FTechnical SpecificationsParameterSymbolConditionMinTyp
-
Integrated Hall Effect Latch Sensor DIODES AH374-W-7 for Brushless DC Motor Commutation Applications
AH374 Single Phase Hall Effect LatchThe AH374 is an integrated Hall-Effect latched sensor designed for electronic commutation of brush-less DC motor applications. It features an on-chip Hall voltage generator, a comparator for Hall voltage amplification, and a Schmitt trigger for noise rejection. The device provides an open-drain output and operates over a wide supply voltage range with temperature compensation. When magnetic flux density exceeds the operate point (BOP), the
-
Omnipolar digital magnetic sensor COTO RR122-1E73-511 with wide temperature range and consumption
Product Overview The RedRock RR122-1E72-511 and RR122-1E73-511 are digital magnetic sensors leveraging patented Tunneling Magnetoresistance (TMR) technology with integrated CMOS. These omnipolar sensors are designed for a wide array of applications including medical, industrial, automotive, and consumer electronics. They offer a high operate sensitivity of 15 G, a wide supply voltage range from 1.7V to 5.5V, and extremely low average current drain of 11 A. With an operating
-
High Sensitivity Hall Effect Latch Diodes AH3712-W-7 for Accurate Position Sensing and Motor Control
AH3712 High-Voltage, High-Sensitivity Hall Effect LatchThe AH3712 is a high-voltage, high-sensitivity Hall-effect latch IC designed for commutation of brushless DC motors, flow meters, linear encoders, and position sensors in industrial and consumer home appliance and personal care applications. Optimized for a 3.0V to 27V supply range, it features a chopper-stabilized architecture and internal bandgap regulator for reliable operation across the entire range. The output
-
Micropower Hall effect switch DIODES AH1893-Z-7 designed for home appliances and portable electronics
Product OverviewThe AH1893 is a high sensitivity, micropower, omnipolar Hall-effect switch IC designed for portable and battery-powered devices. It features internal pull-up and pull-down capabilities, operating over a supply range of 1.6V to 3.6V with an average supply current of only 4.3A at 1.85V. Its hibernating clocking system minimizes power consumption, making it ideal for applications like cellular phones, portable PCs, home appliances, and industrial equipment. The
-
magnetic sensor Cross chip CC6121TO orthogonal dual output Hall effect switch for automotive and industrial applications
Product OverviewThe CC6121 is an orthogonal dual-output, low-temperature drift bipolar latch type Hall effect switch. It integrates two independent channel Hall devices with a fixed relative position (0.5um error accuracy) and signal processing circuits, addressing consistency issues in fine-pitch detectors. Built on BiCOMS process, it features dynamic offset elimination and temperature compensation for consistent magnetic sensitivity, excellent temperature stability, and
