Linear, Compass (ICs)
-
Diodes ah3774 w 7 hall effect latch ic featuring chopper stabilization and robust output protection
Product OverviewThe AH3774 is a high-voltage, high-sensitivity Hall-effect latch IC designed for commutation of brushless DC motors, flow meters, linear encoders, and position sensors. It is optimized for a wide supply voltage range of 3.0V to 28V and features chopper stabilization for superior temperature stability and minimal switch point drift. The device offers robustness with reverse blocking diode and Zener clamp on the supply, along with an overcurrent limit and Zener
-
Automotive position proximity sensing ic with thermal protection DIODES AH3280Q-P-A unipolar switch
Product OverviewThe DIODES AH3241Q-AH3244Q/AH3280Q-AH3282Q are high voltage, high sensitivity, two-wire Hall Effect Unipolar/Latch switch ICs with integrated self-diagnostics and automotive-compliant AEC-Q100 qualification. Designed for position and proximity sensing in automotive applications, these devices operate over a wide supply range of 2.7V to 27V. Key features include a chopper-stabilized architecture, integrated bandgap regulator for temperature compensation,
-
Micropower omnipolar hall effect switch ic diodes ah1809-w-7 with single open drain output and consumption
Product OverviewThe AH1809 is a low sensitivity, micropower Omnipolar Hall Effect switch IC designed for battery-powered consumer products, home appliances, and industrial equipment like smart e-meters. It offers a reliable solution over its operating range due to its dual Hall Effect plates and chopper-stabilized architecture. Optimized for battery and low-power applications, it operates from 2.5V to 5.5V and consumes only 24W at 3V. The single open-drain output switches low
-
DIODES AH180 WG 7 Omnipolar Hall Effect Sensor Switch for Portable Devices Cellular Phones and PDAs
AH180 MicroPower Omnipolar Hall-Effect Sensor SwitchThe AH180 is a micro-power Omnipolar Hall-Effect switch designed for portable and battery-powered equipment such as cellular phones, PDAs, and portable PCs. It utilizes two Hall-Effect plates and a chopper-stabilized architecture for reliable performance across its operating range. Optimized for low power consumption, it operates from a 2.5V to 5.5V supply and consumes only 24W at 3V. The single open-drain output activates
-
Linear Hall Effect Sensor Circuit for Electronic Speed Controllers GoChip Elec Tech Shanghai GH39FKSW
Product Overview The GH39F is a linear Hall effect sensor circuit designed for a wide range of consumer and industrial electronic products. It features a long lifespan, small size, and easy installation, offering high precision, sensitivity, linearity, and temperature stability. The circuit comprises a Hall voltage generator, a linear amplifier, and an emitter follower, producing an output voltage proportional to the input magnetic field strength. Typical applications include
-
Stable performance Hall Effect omnipolar switch IC DIODES AH3582-P-A with internal bandgap regulator
Product OverviewThe AH3582 is a high voltage, high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position, and level sensing. Optimized for a wide supply range of 3.0V to 28V, it features a chopper-stabilized architecture and internal bandgap regulator for stable performance across temperature variations. The device includes reverse blocking diode, Zener clamp on supply and output, and over-current limit for enhanced robustness. Its internally pulled-up
-
Precise linear Hall effect sensor GoChip Elec Tech Shanghai GH3562DB6T with wide supply voltage range
Product Overview The GH3562 is a low-voltage, low-power linear Hall effect sensor designed for applications requiring precise position detection. It features adjustable sensitivity and can operate over a wide supply voltage range of 1.6V to 3.6V. The sensor supports timely switching between an energy-efficient Sleep mode and an active Awake mode, controlled via an external ENABLE pin. In Sleep mode, the output is high impedance, and quiescent current drops to the microampere
-
Compact U DFN2020 6 Package Diodes AH8502 FDC 7 Hall Effect Sensor with Ratiometric Output Voltage
Product OverviewThe AH8502 is a micropower linear Hall-effect sensor featuring an 8-bit output resolution. Its output voltage is ratiometric to the supply voltage and proportional to the magnetic flux density. Designed for battery-powered consumer and industrial applications, it offers flexible operating modes (Micropower, Turbo, External-Drive) controlled by a CNTRL pin to optimize power consumption. The device boasts a low typical supply current of 13A in default micropower
-
Linear Hall Effect Sensor GoChip Elec Tech Shanghai GH1321LSY for Current Speed and Pressure Sensing
Product Overview The GH132X series linear Hall effect sensors from GOCHIP ELECTRONICS TECHNOLOGY (Shanghai) CO., LTD. are designed for consumer and industrial electronic products. These sensors offer precise sensitivity and temperature compensation due to internal corrected resistors. They feature a wide operating temperature range of -40 to +150 and a full voltage range (rail-to-rail) output for accurate signal delivery. The GH132X series is suitable for applications such as
-
Diodes ah1806 p b omnipolar hall effect switch ic with operating voltage from 2.5 volts to 5.5 volts
Product OverviewThe AH1806 is a high-sensitivity, micro-power Omnipolar Hall effect switch IC designed for portable, battery-powered consumer, home appliance, and industrial applications. It offers reliable performance across its operating range due to its sensitive Hall effect plates and copper-stabilized architecture. Optimized for low power consumption (24W at 3V), it operates from 2.5V to 5.5V and features a single open-drain output switchable by either North or South
-
DIODES AH8503 FDC 7 Linear Hall Effect Sensor Featuring High Accuracy and Consumption for Industrial
Product OverviewThe AH8503 is a high-accuracy, micropower linear Hall-effect sensor featuring an 8-bit output resolution. Its output voltage is ratiometric to the supply voltage and proportional to the magnetic flux density. Designed for battery-powered consumer and industrial applications, it operates from 1.6V to 3.6V. The device offers selectable operating modes (Micropower, Turbo, External-Drive) via a CNTRL pin to optimize power consumption, with typical current draws as
-
magnetic field sensor Cross chip CC6207MST featuring latch module and voltage regulator for stability
Product Overview The CC6207M is a low-power, high-sensitivity, omnipolar Hall effect switch sensor with latching output, designed to directly replace traditional reed switches. It is particularly suitable for battery-powered portable electronic devices such as mobile phones, cordless phones, notebooks, and PDAs. The CC6207M offers omnipolar magnetic field detection, responding to both north and south poles, simplifying assembly. Its internal circuitry includes a Hall element,
