Linear, Compass (ICs)
-
Hall Effect omnipolar switch IC DIODES AH3572-P-B featuring wide supply voltage and temperature stability
Product OverviewThe AH3572 is a high voltage, high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position, and level sensing. It operates over a wide supply range of 3.0V to 28V and features chopper stabilization for excellent temperature stability and minimal switch point drift. The device offers superior immunity to stress and RF noise, with built-in protection including a reverse blocking diode and Zener clamps. Its single open-drain output can be
-
High sensitivity hall effect latch ic diodes ah3712 sa 7 for precise commutation and sensor feedback
Product OverviewThe AH3712 is a high-voltage, high-sensitivity Hall-effect latch IC designed for commutation of brushless DC motors, flow meters, linear encoders, and position sensors in industrial and consumer home appliances and personal care applications. It operates over a 3.0V to 27V supply range and features a chopper-stabilized architecture with an internal bandgap regulator for temperature-compensated supply. The device offers an overcurrent limit on its single open
-
sensitive Hall Effect switch DIODES AH3582-SA-7 optimized for industrial and consumer sensing needs
Product OverviewThe AH3582 is a high voltage, high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position, and level sensing in industrial and consumer home appliances. Optimized for a wide supply range of 3.0V to 28V, it features a chopper-stabilized architecture and an internal bandgap regulator for temperature-compensated performance. The device offers robust protection with a reverse blocking diode, Zener clamps on supply and output pins, and an over
-
Compact DIODES AH8501-FDC-7 Linear Hall Effect Sensor with Ratiometric Output and Low Supply Current
Product OverviewThe AH8501 is a high-accuracy, low-power linear Hall effect sensor featuring an 8-bit output resolution. Its output voltage is ratiometric to the supply voltage and proportional to magnetic flux density. Designed for a wide range of applications from battery-powered consumer electronics to industrial equipment, it operates from 1.6V to 3.6V and utilizes an externally controlled ENABLE pin for power-saving clocking. The device offers a typical sensitivity of 2
-
Automotive camshaft sensor GoChip Elec Tech Shanghai GH1817LUA A with unipolar Hall effect technology
Product OverviewThe GH1817/GTS1817 are self-adaptive Hall-effect gear sensors designed for automotive camshaft sensing and other speed sensing applications. The GH1817 requires an external magnet for detecting the motion of ferromagnetic gears, while the GTS1817 is an integrated chip and magnet module. These sensors offer easy installation due to their small package size and are compatible with various gear shapes and sizes. They feature short-circuit protection and an open
-
Micropower Hall Effect Switch DIODES AH1902-Z-7 for Consumer Electronics and Industrial Applications
Product OverviewThe AH1902 is a high-sensitivity, micropower Omnipolar Hall-effect switch IC designed for portable and battery-powered consumer electronics, office equipment, home appliances, and industrial applications. It features internal pull-up and pull-down capability, a low average supply current of 4.3A at 1.8V, and operates across a supply range of 1.6V to 3.6V. Its hibernating clocking system minimizes power consumption, making it ideal for space-constrained designs
-
Digital Hall Effect sensor ElecSuper ESU18EUA with BCD process technology and RoHS compliant material
ESU18EUA Hall Effect SensorThe ESU18EUA is a small, versatile digital Hall-effect latching sensor IC designed to operate with alternating North and South poles. It features enhanced sensitivity, allowing for the use of less expensive magnets, and operates from 3.3V to 26V, making it suitable for low-voltage, energy-efficient applications. The device utilizes BCD process technology and is provided in a TO-92S package.Product AttributesBrand: ElecSuperModel: ESU18EUAPackage: TO
-
DIODES AH182 WG 7 Hall Effect Sensor Device with Stable Performance Under Physical Stress Conditions
DIODES AH182/AH183 Low Power Hall Effect Switch The DIODES AH182/AH183 is a three-terminal Hall effect sensor device with an output driver, primarily designed for battery-operated, hand-held equipment such as cellular phones, cordless phones, and PDAs. It offers micropower operation with a total power consumption as low as 15W at a 2.75V supply. The device features offset canceling technology, superior temperature stability, and extremely low switch-point drift, making it
-
Consumption Omnipolar Hall Effect Sensor Switch DIODES AH180 PG B with Chopper Stabilized Architecture
AH180 MicroPower Omnipolar Hall-Effect Sensor SwitchThe AH180 is a micro-power, omnipolar Hall-Effect switch designed for portable and battery-powered equipment such as cellular phones, PDAs, and portable PCs. It features a chopper-stabilized architecture for reliable operation across its operating range. Optimized for low power consumption (24W at 3V) and a wide supply voltage range (2.5V to 5.5V), the AH180's single open-drain output activates with either a north or south
-
Hall effect switch IC DIODES AH1815-W-7 optimized for portable devices and magnetic tamper detection
Product OverviewThe AH1815 is a low-sensitivity, micro-power Omnipolar Hall effect switch IC designed for portable and battery-powered consumer equipment in home appliance and industrial applications, such as smart-meter magnetic-tamper detection. It offers reliable performance over a wide operating range due to its chopper-stabilized architecture and two sensitive Hall effect plates. Optimized for low power consumption (24W at 3V), it operates from a 2.5V to 5.5V supply and
-
Temperature stable Hall effect sensor Hallwee HAL9303RSO with linear voltage output and performance in industry
Product OverviewThe HAL9303R is a compact, general-purpose linear Hall effect sensor. Its output signal level is proportional to the magnetic field strength applied to its sensitive surface. At zero magnetic field, the output voltage is half of the supply voltage. When an S pole is applied to the marked face (TO/SW package), the output voltage increases linearly with magnetic field strength. Conversely, an N pole causes the output voltage to decrease linearly with increasing
-
Micropower Hall effect switch DIODES AH9246-W-7 with chopper stabilized magnetic switch point and design
Product OverviewThe AH9246 is an ultra-high sensitivity, micropower, omnipolar Hall-effect switch designed for battery-operated handheld and industrial applications. It features a chopper-stabilized architecture for improved magnetic switch point stability and a sleep-awake logic to reduce average current consumption. The output can be switched by either the north or south pole of a magnet. Available in TO92S and SC59 packages.Product AttributesBrand: Diodes IncorporatedCerti
