Compass, Magnetic Field (Modules)
-
automotive Hall sensor Infineon TLE4957C-N E6747 with two wire and three wire configuration options
Product OverviewThe TLE4957Cx-2 E6747 is a dynamic differential Hall effect sensor designed for detecting the motion and position of magnetized pole wheels or gear teeth. It offers high sensitivity, robustness against noise and vibration, and a wide operating temperature range, making it ideal for demanding automotive applications. The sensor features a single-chip solution with a digital output signal and supports both two-wire and three-wire configurations. An optional
-
Versatile Infineon TLE4922-XAN-F hall sensor supporting crankshaft and transmission speed applications
Product DescriptionThe TLE4922 is an active mono cell Hall sensor designed for detecting motion and position of ferromagnetic and permanent magnet structures. It features a self-calibration module for enhanced accuracy during operation. This sensor is optimized as a speed sensor for small engine applications (2- and 3-wheelers), including crankshaft speed and position sensing, transmission speed on the output shaft, and speedometer applications. Its excellent sensitivity,
-
accurate Hall sensor Infineon TLE4928CHAMA1 designed for gear wheel and pole position sensing tasks
Product OverviewThe TLE4928(C) is a highly accurate differential Hall sensor designed for detecting the motion and position of ferromagnetic structures such as pole or gear wheels. It utilizes a self-calibration mode for optimal accuracy, achieving a high-accuracy running mode after a few transitions post start-up. The sensor features fixed hidden hysteresis combined with frequent recalibration in run mode, ensuring accurate switching over its lifetime and reliable performanc
-
position detection sensor Infineon TLE49643MXTSA1 with wide voltage range and overvoltage protection
Product Overview The TLE4964-3M is a high-precision unipolar Hall Effect switch designed for demanding automotive and industrial applications. It offers a wide operating supply voltage range of 3.0 V to 32 V with overvoltage capability up to 42 V without external resistors, ensuring reliable operation even under load-dump conditions. Key features include reverse polarity protection, output overcurrent and overtemperature protection, active error compensation for stable
-
High precision angle sensor Infineon TLE4998C8D with 16 bit resolution and multi sensor bus ID selection
Product OverviewThe TLE4998C8(D) is a programmable linear Hall sensor IC designed for highly accurate angle and position detection in automotive and industrial applications. It features a digital SPC (Short PWM Code) signal based on the SENT protocol, offering flexible operation modes including range selection and ID selection for multi-sensor bus systems. The sensor provides digital temperature and stress compensation, a 16-bit overall resolution, and minimal drift over
-
Automotive Vertical Dual Hall Effect Latch Infineon TLE4966V1KHTSA1 In Plane Sensing Sensor Device
TLE4966V-1K: In-Plane Sensing with Vertical Dual Hall Effect Latch for Automotive Applications Product Overview The TLE4966V-1K is a Vertical Dual Hall Effect Latch designed for automotive applications, specifically for detecting the rotation direction and speed of a pole wheel. Its in-plane sensing capability allows for parallel mounting of the magnetic encoder and sensor, enabling correct direction detection even at high distances to the Hall elements. This device offers
-
EEPROM programmable linear Hall sensor Infineon TLE4998P4 with digital PWM output and diagnostic features
TLE4998P3 / TLE4998P4 Programmable Linear Hall Sensor The TLE4998P is a programmable linear Hall sensor designed for highly accurate rotation and position detection, as well as current measurement applications. It provides a digital PWM signal suitable for direct decoding by microcontrollers. The sensor offers digital signal processing with 20-bit resolution and digital temperature compensation, ensuring excellent long-time stability. Its programmability via EEPROM allows for
-
magnetic field sensor Honeywell VF360ST digital Hall effect IC for automotive and industrial applications
Product OverviewThe VF360NT, VF360ST, and VF460S are high sensitivity latching digital Hall-effect sensor ICs designed for operation by magnetic fields from permanent magnets or electromagnets. They respond to alternating North and South poles, with the VF360NT activated by a North pole and the VF360ST and VF460S by a South pole. These sensors offer a clean output signal and faster latch response times due to their non-chopper-stabilized design, making them suitable for
-
High accuracy rotation and position sensor Infineon TLE4998P3 with digital temperature compensation
TLE4998P3 / TLE4998P4 Programmable Linear Hall Sensor The TLE4998P is a programmable linear Hall sensor designed for highly accurate rotation and position detection, as well as current measurement applications. It provides a digital PWM output signal ideal for direct decoding by microcontrollers. The sensor offers digital signal processing with 20-bit resolution and digital temperature compensation, ensuring excellent long-time stability. Its key advantages include robust
-
Magnetic Sensing Device Infineon TLE4961-1M Automotive Hall Effect Latch for Accurate Index Counting
TLE4961-1M High Precision Automotive Hall Effect Latch TLE4961-1M High Precision Automotive Hall Effect Latch Published by Infineon Technologies AG Product Overview The TLE4961-1M is a high-precision Hall effect latch designed for automotive and industrial applications requiring accurate magnetic sensing. It features a wide operating supply voltage range from 3.0 V to 32 V with overvoltage capability up to 42 V without an external resistor, making it suitable for demanding
-
Transmission control unit sensor Infineon TLE4954CE4807BAMA1 with vibration suppression and PWM current interface
Product OverviewThe TLE4954C/51C is an integrated differential Hall effect sensor designed for transmission applications. It features a two-wire PWM current interface and provides rotational speed and direction information to the transmission control unit. The sensor incorporates a sophisticated algorithm for active vibration suppression while maintaining excellent airgap performance. Versions with integrated back bias magnets (CB) are also available.Product AttributesBrand:
-
motion sensing solution Infineon TLE4966K Hall effect sensor with digital speed and direction output
High Precision Hall-Effect Switch with Direction Detection Product Overview The TLE4966K is a high-precision Hall-effect sensor designed for applications requiring accurate speed and direction detection. It features a wide supply voltage range (2.7 V to 24 V), operation from unregulated power supplies, and exceptional stability of magnetic switching points due to active error compensation and chopper techniques. The device provides a speed signal and a direction signal, with
