Compass, Magnetic Field (Modules)
-
Infineon TLE493DW2B6A1 3D Hall sensor supporting X Y angular measurement and deep power down mode
Product OverviewThe TLE493D-W2B6 is a low-power 3D Hall sensor featuring an I2C interface and a wake-up function. It is designed for automotive and industrial applications, offering precise 3D magnetic flux density sensing with programmable resolution. The sensor supports X-Y angular measurement, diagnostic functions, and multiple power modes, including a deep power-down mode with minimal consumption. Its configurability and integrated diagnostics make it suitable for various
-
Automotive transmission sensor Infineon TLE4953 with two wire PWM interface and AEC Q100 qualification
Product Overview The TLE4953x series of differential Hall Effect transmission speed sensors from Infineon Technologies are designed for modern transmission and ABS systems, providing crucial rotational speed and direction information. These single-chip solutions operate without external components, offering a fast power-up time and a wide frequency range (0 to 12 kHz). They are built for harsh automotive environments, featuring excellent accuracy, sensitivity, a wide
-
High precision industrial hall effect switch Infineon TLV49762KXTSA1 with active error compensation
Infineon TLV4976-2K: Value Optimized Hall Effect Switch with Current Interface Product Overview The TLV4976-2K is a high-precision unipolar Hall effect switch designed for industrial and consumer applications. It features a two-wire, 6mA/14mA current interface, offering a cost-effective and reliable solution for position sensing. The device utilizes a chopped measurement principle for high stability switching thresholds across a wide operating temperature range of -40C to 85C
-
bipolar Hall effect latch Infineon TLE49612MXTMA1 for automotive and industrial index counting applications
Product Overview The TLE4961-2M is a high-precision bipolar Hall effect latch designed for demanding automotive and industrial applications. It offers a wide operating supply voltage range (3.0 V to 32 V) with overvoltage capability up to 42 V without external resistors, reverse polarity protection, and integrated output overcurrent and overtemperature protection. Its active error compensation and stable magnetic thresholds make it ideal for index counting applications, such
-
Single dual die programmable linear Hall sensor with analog output Infineon TLE4997A8DXUMA1 sensor IC
Product OverviewThe TLE4997A8(D) is a programmable single/dual die linear Hall sensor IC designed for highly accurate angle and position detection. It features a ratiometric analog output signal, ideal for A/D conversion with the supply voltage as a reference. The device utilizes BiCMOS technology with high voltage capability and reverse polarity protection, incorporating a 16-bit DSP for digital signal processing, along with digital temperature and analog stress compensation
-
wheel speed sensor Infineon TLE5045ICR050HALA1 featuring integrated GMR technology and wide temperature range
Product OverviewThe Infineon TLE5045iC is a high-end GMR wheel speed sensor designed for sophisticated vehicle control systems. It offers best-in-class jitter performance, making it ideal for wheel speed applications and as a component in indirect tire pressure monitoring systems (iTPMS). Based on integrated giant magneto resistance (iGMR), it provides highly accurate rotational speed sensing with excellent sensitivity over a wide temperature range. The sensor is robust
-
Magnetic flux density sensor with diagnostic features and consumption Infineon TLE493DP2B6A2HTSA1
Product OverviewThe TLE493D-P2B6 is a high-accuracy, low-power 3D Hall sensor with an I2C interface, designed for precise magnetic flux density sensing in the X, Y, and Z directions. It offers programmable flux resolution, X-Y angular measurement capabilities, and diagnostic features for system integrity. With its wake-up function and ultra-low power consumption in power-down mode, it is ideal for battery-powered applications. The sensor provides 12-bit data resolution for
-
High accuracy angle and position sensor featuring SENT output Infineon TLE4998S8DXUMA1 with digital temperature compensation
Product Overview The TLE4998S8(D) is a high-performance, programmable single/dual linear Hall sensor designed for highly accurate angle and position detection. It integrates two individual linear Hall sensor ICs with a Single Edge Nibble Transmission (SENT) open-drain output signal, compliant with SAE J2716. Featuring 20-bit digital signal processing (DSP), digital temperature and stress compensation, and 16-bit overall resolution, it offers minimal drift over temperature and
-
High Stability Unipolar Hall Switch Infineon TLE49641KXTSA1 Suitable for Harsh Automotive Conditions
Unipolar Hall Effect Switch TLE4964-1K Product Overview The TLE4964-1K is a high-precision unipolar Hall effect switch designed for demanding automotive and industrial applications. It offers a wide operating supply voltage range of 3.0 V to 32 V with overvoltage capability up to 42 V without external resistors, ensuring robust performance in various power supply conditions. Key features include reverse polarity protection, output overcurrent and overtemperature protection,
-
hall effect switch Infineon TLE4964-6M offering stable magnetic thresholds and active error compensation
TLE4964-6M High Precision Automotive Hall Effect Switch Product Overview The TLE4964-6M is a high-precision Hall Effect switch designed for automotive and industrial applications requiring superior supply voltage capability, an extended operating temperature range, and stable magnetic thresholds. With a broad supply voltage range from 3.0 V to 32 V and overvoltage capability up to 42 V without an external resistor, it offers robust performance in demanding environments. Key
-
Infineon TLI493DW2BWA0XTMA1 3D Hall sensor with 12 bit data resolution and halogen free certification
Product OverviewThe TLI493D-W2BW is a low-power 3D Hall sensor featuring an I2C interface and a Wake-Up function. It offers 3D magnetic flux density sensing up to 160 mT with programmable sensitivity and a 12-bit data resolution for each measurement direction. The sensor is designed for compact system integration with an extremely small form factor and very low power consumption in its power-down mode (7 nA typ.). It supports variable update frequencies, configurable power
-
Robust automotive Hall sensor Infineon TLE4928CXAAF47XAMA1 featuring symmetrical switching thresholds
Product Overview The TLE4928(C) is a highly accurate differential Hall sensor designed for detecting the motion and position of ferromagnetic structures. It utilizes a self-calibration mode for optimal accuracy, quickly reaching a high-accuracy running mode after start-up. The sensor features fixed hysteresis combined with frequent recalibration in run mode, ensuring accurate switching over its lifetime and reliable performance even under challenging conditions like
