Ambient Light, IR, UV Sensors
-
Durable reflective object sensor OPTEK OPB717Z with photologic sensor and UL approved 26 AWG wire leads
Photologic Reflective Object Sensor KW715, KW716, KW717, KW718 The KW715 series reflective assembly features a GaAIAs LED and a Photologic sensor within an IR transmissive housing. Designed to replace mechanical limit switches where long life and reliability are critical, these sensors are characterized to detect paper at 0.5" (12.7 mm) and offer a wide operating distance range capable of detecting reflective objects at varying distances, dependent on the reflectance material
-
OMRON EE SPX305 W2A 2M slot type photomicrosensor with built in amplifier and bright light indicator
Product OverviewThe EE-SPX-W series photomicrosensors feature a slot-type design with a built-in amplifier and an attached cable, effectively reducing external light interference through light modulation. They operate on a wide voltage range and include a bright light indicator for easy monitoring.Product AttributesBrand: OMRONSensing Method: Through-beam typeOutput Type: NPN outputConnecting Method: Pre-wired (standard cable length: 1 m)Material: Case: Polycarbonate, Holder:
-
Gallium arsenide infrared reflective sensor OPTEK OPB710F with filtered diode and silicon phototransistor output
Reflective Object Sensor KW710, KW710&, KW730, KW730& The KW710 series reflective object sensors are designed for non-contact object detection. These sensors utilize a gallium arsenide infrared emitting diode paired with either a silicon phototransistor (KW710/KW710&) or a silicon photodarlington (KW730/KW730&). They are housed in a standard TO-72 header with a black plastic sleeve filled with encapsulating epoxy. The "F" versions (KW710F/KW730F) incorporate a filtering
-
High Sensitivity Surface Mount Photodiode onsemi QSB34GR with Daylight Filter and Tape Reel Packaging
Product OverviewThe QSB34GR / QSB34ZR / QSB34CGR / QSB34CZR are surface-mount silicon pin photodiodes designed for various applications. These photodiodes feature a wide reception angle of 120, a large chip size of 3 mm x 3 mm, and high sensitivity with low capacitance. Available in over-mount and under-mount package configurations, they are supplied on tape and reel for automated assembly.Product AttributesBrand: onsemiMaterial: SiliconPackage Type: PLCC 2LMounting: Surface
-
transmissive photomicrosensor OMRON EE-SX3173-P2 with secure locking connector and Photo IC output
Product OverviewThe EE-SX3173/4173-P Series are transmissive photomicrosensors designed for integration into devices. They offer a compact, industry-leading size, and are available in 5 VDC and 24 VDC power supply options. These sensors feature a Photo IC output with selectable Dark-ON/Light-ON modes and a secure locking connector for enhanced resistance to vibration and shock. A Zener diode for increased noise immunity is included in specific models (EE-SX3173/4173-P3-Z)
-
compact silicon photomultiplier sensor onsemi MICROFC-30035-SMT-TR with tileable surface mount package
Product OverviewThe ON Semiconductor C-Series Silicon Photomultipliers (SiPM) are low-light sensors designed for high-gain, single-photon sensitivity across the UV-to-visible light spectrum. They offer performance comparable to conventional PMTs with the advantages of solid-state technology, including low operating voltage, excellent temperature stability, robustness, compactness, and cost-effectiveness. These sensors are ideal for ultrafast timing applications with rise
-
Industrial Reflective Sensor OPTEK OPB720A-12Z with 12 Inch Detection Range and Stable Logical Output
Product OverviewThe OPB720A and OPB720B Series are long-distance reflective switches designed to detect objects from a distance of up to 12 inches (305 mm) using standard 90% reflective material, and can detect objects as small as 0.08 inches (2 mm). These sensors offer ambient light rejection and feature a logical output that switches from high to low when a reflective target is present or absent, respectively. With hysteresis, the series minimizes output switching
-
Photologic Sensor OPTEK OPL813-OC Hermetic TO-18 Package with Schmitt Trigger and TTL LSTTL Output
Photologic Hermetic Sensors The OPL800, OPL801, and OPL820 series sensors integrate a photodiode, linear amplifier, and Schmitt trigger on a single monolithic chip. The OPL810, OPL811, and OPL813 variants additionally include a voltage regulator. These devices are hermetically sealed in a lensed TO-18 metal can package and feature TTL/LSTTL compatible logic-level outputs. The Schmitt trigger's hysteresis provides high immunity to input and VCC noise. OPL800 series devices
-
High Immunity Hermetically Sealed Sensor OPTEK OPL811 with Integrated Amplifier and Voltage Regulator
Photologic Hermetic Sensors The OPL800, OPL801, and OPL820 series sensors integrate a photodiode, linear amplifier, and Schmitt trigger onto a single monolithic chip. The OPL810, OPL811, and OPL813 variants additionally include a voltage regulator. These devices are hermetically sealed in a lensed TO-18 metal can, offering TTL/LSTTL compatible logic-level outputs capable of driving multiple TTL loads without external circuitry. The integrated Schmitt trigger provides high
-
OMRON EE SY410 reflective photomicrosensor featuring temperature compensation and wide voltage range
Product Overview The EE-SY310/-SY410 are compact, reflective photomicrosensors featuring an integrated IC chip with a built-in detector element and amplifier, including temperature compensation. These sensors offer a wide supply voltage range of 4.5 to 16 VDC and can directly interface with C-MOS and TTL logic. The EE-SY310 is a Dark ON model, while the EE-SY410 is a Light ON model. They are designed for sensing applications with a recommended sensing distance of 5.0 mm.
-
Photologic Encoder Detector OPTEK OPL583 dual channel with matched photodiodes and open collector inverter output
Product OverviewThe OPL583 is a Dual Channel Photologic Encoder Detector featuring a monolithic integrated circuit with two independent photodiodes, linear amplifiers, Schmitt trigger circuits, and output transistors, all managed by a common voltage regulator. Its matched dual-channel characteristics and fixed photodiode positions offer significant design flexibility. The outputs are TTL/LSTTL compatible and can drive up to 8 TTL loads across a 4.5 to 16 V range. Ideal for
-
Automotive grade light sensor RENESAS ISL76683AROZ-T7 with 2.5V to 3.3V supply and flicker rejection
Product OverviewThe ISL76683 is an integrated light sensor with an internal integrating Analog-to-Digital Converter (ADC) designed for automotive applications. It offers 16-bit resolution and effectively rejects 50Hz and 60Hz flicker from artificial light sources. The I2C interface allows for user-programmable lux sensitivity ranges, optimizing counts per lux across various lighting conditions, and provides multi-function control and remote monitoring. With a normal operating
