Accelerometers
-
6D MEMS Inertial Measurement Unit QST QMI8658C with Motion CoProcessor and Multiple Interface Support
Product OverviewThe QMI8658C is a 6D MEMS Inertial Measurement Unit (IMU) featuring a motion co-processor and 9-axis sensor fusion capabilities. It offers precise orientation accuracy of 3 pitch and roll, and 5 yaw/heading when used with the XKF3 sensor fusion library. With low gyroscope noise (15 mdps/Hz), low latency, and wide bandwidth, it is suitable for demanding applications such as robotic vacuums, industrial tilt modules, pedestrian navigation, GNSS augmentation, 5G
-
3D digital accelerometer and gyroscope sensor module ST LSM330DLTR with selectable full scale acceleration range
LSM330DL Linear Sensor ModuleThe LSM330DL is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope. It leverages ST's robust manufacturing process for micromachined accelerometers, combining specialized sensing elements with CMOS technology for optimized IC interfaces. The LSM330DL offers a dynamic, user-selectable full-scale acceleration range of 2g/4g/8g/16g and an angular rate of 250/500/2000 deg/sec. Both the accelerometer and gyroscope
-
Digital I2C SPI three axis linear accelerometer ST LIS2DE12TR with selectable full scales and ultra design
Product OverviewThe LIS2DE12 is an ultra-low-power, high-performance three-axis linear accelerometer from the "femto" family. It features a digital I2C/SPI serial interface and offers user-selectable full scales of 2g/4g/8g/16g. With an output data rate from 1 Hz to 5.3 kHz, it is ideal for motion-activated functions, display orientation, shake control, pedometers, gaming, and impact recognition. The device boasts ultra-low power consumption down to 2 A, independent interrupt
-
ST SPMB250A1 sensor featuring LIS3LV02DL MEMS accelerometer and IEEE 802154 compliant wireless radio
Product OverviewThe SPMB250-A1 is a ready-to-use wireless acceleration sensor designed for remote motion monitoring in wireless sensor networks. It features an IEEE 802.15.4 compliant radio, an integrated three-axis MEMS accelerometer, and an onboard antenna. The device is programmable via an SIF connector and supports the EMZNET ZigBee protocol stack. It offers external connections for power, reset, commissioning, and debugging LEDs, and can be fixed with screws or pads for
-
Low noise three axis accelerometer ST LIS25BATR with 20000 g shock survivability and compact package
Product OverviewThe LIS25BA is a low-noise, high-bandwidth three-axis digital accelerometer featuring a dedicated TDM interface. With a 3.85 g full scale and 16-bit data output, it offers a signal bandwidth of 2400 Hz and high shock survivability up to 20000 g. This sensor is designed for applications requiring precise motion detection and is available in a compact LGA package, operating across an extended temperature range.Product AttributesBrand: STMicroelectronics (implied
-
triaxial piezoelectric accelerometer TE Connectivity 830M1 0025 TRAY PACKAGED for condition monitoring
TE Connectivity 830M1 Triaxial Condition Monitoring AccelerometerThe TE Connectivity 830M1 is a low-cost, triaxial piezoelectric accelerometer designed for embedded condition monitoring and preventive maintenance applications. It features a hermetically sealed LCC package, piezo-ceramic crystals in shear mode, and low-power electronics. The accelerometer offers a wide dynamic range from 25g to 2000g with a flat frequency response up to 15kHz across all three axes. An
-
triaxial piezoelectric accelerometer TE Connectivity 830M1 0500 TRAY PACKAGED for condition monitoring
TE Connectivity 830M1 Triaxial Condition Monitoring AccelerometerThe TE Connectivity 830M1 is a cost-effective, triaxial piezoelectric accelerometer designed for embedded condition monitoring and preventive maintenance. It features Piezo-Ceramic Crystals in shear mode, a hermetically sealed LCC package, and an integrated RTD temperature sensor. The 830M1 offers superior resolution, dynamic range, and bandwidth compared to MEMS devices, making it ideal for machine health
-
TDK InvenSense IAM 20381HT 3 Axis Accelerometer with Embedded Temperature Sensor and Digital Filters
Product OverviewThe IAM-20381HT is a high-performance, automotive-grade 3-axis accelerometer designed for non-safety automotive applications. Housed in a compact 3x3x0.75mm 16-pin LGA package, it offers a user-programmable full-scale range of 2g, 4g, 8g, and 16g. Its integrated 4096-byte FIFO buffer reduces serial bus traffic and power consumption by enabling the system processor to perform burst reads. This device simplifies integration by eliminating the need for multiple
-
Digital I2C Output MEMS Accelerometer SENSORTEK STK8BA58 LGA 12PIN with Motion Detection Interrupts
Product OverviewThe STK8BA58 is a low-profile, capacitive MEMS 3-axis linear accelerometer with a digital I2C output. It offers dynamically selectable full-scale ranges of 2g, 4g, or 8g, with 12-bit digital conversion at user-configurable sample rates from 14 to 2000 samples per second. The device features compensation for 0g offset and gain errors, a high shock survivability of 10000g, and on-chip interrupt generation for motion detection (new data, any-motion, significant
-
triaxial piezoelectric accelerometer TE Connectivity 830M1-2000-TRAY-PACKAGED for embedded condition monitoring
Product OverviewThe TE Connectivity 830M1 is a low-cost, triaxial piezoelectric accelerometer designed for embedded condition monitoring and preventive maintenance. It features Piezo-Ceramic Crystals in shear mode, a hermetically sealed LCC package, and offers amplified analog outputs. With dynamic ranges from 25g to 2000g and a wide bandwidth up to 15,000Hz, it provides superior resolution and dynamic range compared to MEMS devices. An integrated RTD temperature sensor is
-
Automotive acceleration sensor ST AIS2120SXTR featuring 14 bit output and dual axis sensing for master control applications
Product OverviewThe AIS1120SX / AIS2120SX is a MEMS automotive acceleration sensor featuring a single or dual-axis sensing element and an SPI interface. It is designed for central acceleration sensing in master control units, offering a 14-bit data output and a full scale of +/-120 g. The sensor includes features like slow and fast offset cancellation, embedded self-test, and a selectable low-pass filter, making it suitable for demanding automotive applications.Product
-
THALES ISC IC400 000K 3 Axis MEMS Orientation Sensor with 200 Hertz Update Rate and USB RS 232 Interface
Product OverviewThe Thales InterSense InertiaCube4 is a 3-DOF MEMS-based inertial orientation tracking sensor, utilizing advanced Kalman filtering for full 360 sourceless orientation tracking. Its portable design offers high-end performance and accuracy, making it ideal for applications in simulation & training, virtual & augmented reality, motion capture, and human movement analysis. It is well-suited for training & simulation, physical therapy, biomechanics analysis,
