Analog and Digital Output
-
analog temperature sensor MICROCHIP MCP9701A-E TO with 19.5 millivolt per degree Celsius coefficient
Product OverviewThe MCP9700/9700A and MCP9701/9701A are analog temperature sensors featuring a Linear Active Thermistor Integrated Circuit (IC). These low-cost, low-power sensors convert temperature into an analog voltage, eliminating the need for additional signal-conditioning circuitry required by traditional resistive sensors like thermistors. They are optimized for direct connection to microcontroller Analog-to-Digital Converters (ADCs), offering a 10.0 mV/C (MCP9700
-
Digital thermal supervisor MICROCHIP MIC284-3BMM-TR with failsafe diode fault response and consumption
MIC284 Two-Zone Thermal SupervisorThe MIC284 is a versatile digital thermal supervisor designed for CPU thermal supervision in computing applications. It measures both local and remote temperatures using an 8-bit Sigma-Delta ADC and communicates via a 2-wire SMBus-compatible interface. Key features include programmable thermostat settings, an open-drain interrupt output pin for alarms or thermostatic control, and an open-drain overtemperature output pin for fan control or
-
SMBus temperature sensor MICROCHIP EMC1412-1-ACZL-TR featuring fixed SMBus address and high accuracy
Product OverviewThe EMC1412 is a high-accuracy, low-cost, System Management Bus (SMBus) temperature sensor designed for complex environmental monitoring. It features Resistance Error Correction (REC), Beta Compensation for CPU diodes, and automatic diode type detection, offering a robust solution for applications requiring precise temperature monitoring. The sensor monitors two channels (one external, one internal) with 1C accuracy and 0.125C resolution.Product AttributesBran
-
MICCHIP MIC384-3BM-TR digital thermal supervisor featuring two remote temperature sensing capability
Product OverviewThe MIC384 is a versatile digital thermal supervisor designed to measure local and two remote temperatures. It features a 2-wire SMBus-compatible interface, programmable thermostat settings, and an open-drain interrupt output. Its fault queues and failsafe response to diode faults prevent nuisance tripping and ensure reliable operation. With a wide power supply range and low power shutdown mode, the MIC384 is ideal for demanding thermal management applications
-
Analog temperature sensor MICROCHIP MCP9701AT-E/LT with wide operating voltage and direct ADC output
Product OverviewThe MCP9700/9700A and MCP9701/9701A are analog temperature sensors that convert temperature into an analog voltage. These low-cost, low-power Linear Active Thermistor ICs eliminate the need for additional signal-conditioning circuits required by traditional resistive sensors like thermistors. Their output voltage can be directly connected to a microcontroller's ADC, offering a simple and efficient solution for temperature monitoring. They are designed to drive
-
Microchip digital temperature sensor MICROCHIP TC74A0-3.3VAT with standby and 8 bit digital output
Product OverviewThe TC74 is a serially accessible, digital temperature sensor designed for low-cost, small-form-factor applications. It converts temperature from an onboard sensing element into an 8-bit digital word, accessible via a 2-wire SMBus/I2C compatible serial port. This allows for multi-drop/multi-zone monitoring and features a low-power Standby mode. With a temperature resolution of 1C and a nominal conversion rate of 8 samples/sec, the TC74 offers ease of use and
-
Serially Programmable Temperature Sensor MICROCHIP TCN75-3.3MUA with Shutdown and Comparator Output
Product OverviewThe TCN75 is a serially programmable temperature sensor designed to notify a host controller when ambient temperature exceeds a user-defined set point. It offers programmable hysteresis and features a standard 2-wire serial interface compatible with industry-standard protocols. The device can function as a simple comparator for thermostat operation or as a temperature event interrupt output. With the ability to support up to eight TCN75 devices on the same bus
-
environmental monitoring MICROCHIP EMC1814T-AE/9R with internal and external diode temperature accuracy
Product Overview The EMC1812/13/14/15/33 devices are high-accuracy, two-wire (I2C) temperature sensors designed for complex environmental monitoring. They monitor up to five temperature channels, offering advanced features like Resistance Error Correction (REC), Beta Compensation, and rate of temperature change measurement with preemptive alerts. These capabilities provide a robust solution for managing variable system temperatures, eliminating errors from series resistance
-
Digital Temperature Sensor Microchip TC77-5.0MOA SPI MICROWIRE Interface Serial Output Compatible
Product OverviewThe TC77 is a serially accessible digital temperature sensor designed for low-cost, small-form-factor applications. It outputs temperature data as a 13-bit digital word, compatible with SPI and MICROWIRE interfaces. Offering solid-state temperature sensing with high accuracy across a wide temperature range, the TC77 features low power consumption in both continuous conversion and shutdown modes, making it ideal for thermal management in various electronic
-
Multi Zone Temperature Monitoring Sensor MICROCHIP MCP9804T-E/MS with SMBus I2C Compatible Interface
Product OverviewThe Microchip Technology Inc. MCP9804 is a digital temperature sensor that accurately converts temperatures from -40C to +125C into a digital word. It offers user-programmable registers for flexible temperature sensing applications, including shutdown or low-power modes, and user-defined temperature alert window and critical output limits. The sensor outputs an alert signal when the temperature deviates beyond specified boundaries, with configurable alert
-
Serial Temperature Sensor MICROCHIP TC74A5-3.3VCTTR with SMBus Compatible Interface and Standby Mode
Product OverviewThe TC74 is a serially accessible, digital temperature sensor designed for low-cost, small-form-factor applications. It converts temperature from an onboard sensing element into an 8-bit digital word, accessible via a 2-wire SMBus/I2C compatible serial port. This interface allows for multi-drop/multi-zone monitoring. The device features a low-power Standby mode, activated by the SHDN bit in the CONFIG register, reducing current consumption to 5 A (typ.). With
-
Temperature sensor Microchip TCN75AVUA713 with programmable registers and active low high comparator output
Microchip TCN75A Digital Temperature SensorThe Microchip TCN75A is a digital temperature sensor that converts ambient temperatures to a digital word with high accuracy. It features user-programmable registers for flexible temperature-sensing applications, allowing for user-selectable resolution, power-saving modes (Shutdown and One-shot), and configurable temperature alert and hysteresis limits. The sensor outputs an alert signal when temperature thresholds are crossed, with
