Accelerometers
-
6 axis motion tracking sensor TDK InvenSense IIM 42653 with programmable interrupts and FIFO buffer
Product OverviewThe IIM-42653 is a high-performance 6-axis SmartIndustrial MotionTracking MEMS device designed for industrial applications. It features an extended operating temperature range, combining a 3-axis gyroscope and a 3-axis accelerometer in a compact 2.5 mm x 3 mm x 0.91 mm (14-pin LGA) package. The device includes a 2 KB FIFO for efficient data handling, reducing serial bus traffic and power consumption. It supports accurate external clock input for improved
-
Compact MEMS 6 axis Inertial Measurement Unit IMU THALES V15206 17 02 with high precision and consumption
Product OverviewThe NavChip Series 3 is a high-precision MEMS 6-axis Inertial Measurement Unit (IMU) designed for embedded applications requiring small size, low cost, and low power consumption. Utilizing proprietary MEMS technologies and advanced signal processing, it offers superior performance, miniaturization, and environmental ruggedness. The unit is fully factory-calibrated and temperature-compensated across its operating range and provides compensated and V outputs
-
Solder mount uniaxial MEMS DC accelerometer TE Connectivity 3038-6000 with 6000 g acceleration range
Product OverviewThe MEAS 3038 SMT DC Response Embedded Accelerometers are uniaxial MEMS DC accelerometers designed for vibration sensing. These embedded accelerometers offer a DC response and are suitable for applications requiring precise measurement of acceleration.Product AttributesBrand: MEASProduct Type: DC Response Embedded AccelerometersAccelerometer Type: MEMS DCNumber of Sensing Axes: UniaxialMounting Type: SolderPrimary Product Material: CeramicCertifications: EU
-
MEMS based 3 axis digital gyroscope ST A3G4250D with SPI I2C communication and temperature stability
Product OverviewThe A3G4250D is a low-power 3-axis digital output gyroscope featuring a MEMS motion sensor. It offers exceptional stability at zero rate level and sensitivity over temperature and time. The device includes a sensing element and an IC interface that communicates measured angular rate via standard SPI or I2C digital interfaces. It is designed for applications requiring precise motion detection and control.Product AttributesBrand: STMicroelectronicsCertifications
-
Versatile 6 axis motion sensor TDK InvenSense IIM 20670 with embedded temperature sensor and filters
Product DescriptionThe IIM-20670 is a SmartIndustrial 6-axis MotionTracking device featuring a 3-axis gyroscope and a 3-axis accelerometer in a compact 4.5x4.5x1.1 mm3 (24-pin DQFN) package. Leveraging InvenSense's patented CMOS-MEMS fabrication platform, it offers a fully integrated, high-performance component for industrial applications. The device includes six independent mechanical structures, programmable full-scale ranges for both gyroscope (41 dps to 1966 dps) and
-
Dual axis MEMS angular rate sensor TDK InvenSense ICG 1020S with 20 MHz SPI interface and consumption
Product DescriptionThe ICG-1020S is a miniature dual-axis MEMS angular rate sensor specifically designed for optical image stabilization (OIS) in smartphone camera modules and other mobile devices. It offers backward compatibility with up to 32 kHz ODR, extremely low RMS noise and noise density, and high resolution. Key advantages include programmable full-scale ranges, a fast 32 KHz sample rate, low phase delay with a 20 MHz SPI interface, very low rate noise at 4 mdps/Hz,
-
Single Axis Piezoelectric Accelerometer TE Connectivity 20005836-01 for Predictive Maintenance Solutions
TE Connectivity 820M1 Single Axis AccelerometerThe TE Connectivity 820M1 is a low-cost, single-axis, board-mountable piezoelectric accelerometer designed for embedded condition monitoring and preventive maintenance applications. It features a piezo-ceramic crystal in shear mode with low-power electronics, sealed in a hermetic LCC package. The 820M1 offers superior resolution, dynamic range, and bandwidth compared to MEMS devices, making it ideal for machine health monitoring,
-
3 axis linear accelerometer ST LIS2DUXS12TR with ultralow power consumption and user selectable full scale ranges
Product OverviewThe LIS2DUXS12 is a smart, digital, 3-axis linear accelerometer designed for ultralow power consumption. It features an always-on anti-aliasing filter, a finite state machine (FSM), a machine learning core (MLC) with adaptive self-configuration (ASC), and an analog hub/Qvar sensing channel. This accelerometer offers advanced edge processing capabilities, system optimization through its analog hub, and efficient system integration with its MIPI I3C interface
-
Single axis MEMS acceleration sensor ST AIS1120SXTR with full scale 120 g and temperature range minus 40 to plus 105
Product OverviewThe AIS1120SX / AIS2120SX is a MEMS automotive acceleration sensor designed for single or dual-axis sensing with an SPI interface. It provides acceleration information to a master control unit and is suitable for applications like airbag systems and vibration/impact monitoring. The device features a 14-bit data output, a full scale of +/-120 g, and an extended operating temperature range.Product AttributesAEC-Q100 qualifiedECOPACK compliantTechnical Specificat
-
automotive MEMS device TDK InvenSense IAM 20685HP with 6 axis MotionTracking and ISO26262 certification
Product OverviewThe IAM-20685HP is a 6-axis MotionTracking device from TDK InvenSense, integrating a 3-axis gyroscope and a 3-axis accelerometer in a compact 4.5x4.5x1.1 mm3 (24-pin DQFN) package with a wettable flanks option. Designed for ADAS and autonomous driving applications, it leverages a patented CMOS-MEMS fabrication platform for high performance and a small form factor. The device is ISO26262:2018 ASIL B certified, automotive-qualified, and reliability tested
-
Three axis accelerometer with digital serial interface ST AIS3624DQ supporting SPI and I2C protocols
Product OverviewThe AIS3624DQ is an ultra-low-power, high-performance three-axis accelerometer with a digital serial interface. It features SPI and I2C compatible interfaces, offering advanced power saving and smart sleep-to-wake functions. The device supports dynamically selectable full scales of 6g/12g/24g and can measure accelerations with output data rates from 0.5 Hz to 1 kHz. Its embedded self-test capability allows for functional verification, and it can generate
-
6 axis inertial measurement unit with dual modes and machine learning core ST ASM330LHHXG1TR automotive grade imu
Product OverviewThe ASM330LHHXG1 is a 6-axis Inertial Measurement Unit (IMU) designed for automotive non-safety applications. It features a 3-axis digital accelerometer and a 3-axis digital gyroscope with an extended temperature range of -40 to +125C. Leveraging ST's mature MEMS manufacturing processes, this device offers high stability over temperature and time, superior sensing precision, and is AEC-Q100 compliant. It supports dual operating modes (high-performance and low
