Linear, Compass (ICs)
-
Compact U DFN2020 6 Package Diodes AH8502 FDC 7 Hall Effect Sensor with Ratiometric Output Voltage
Product OverviewThe AH8502 is a micropower linear Hall-effect sensor featuring an 8-bit output resolution. Its output voltage is ratiometric to the supply voltage and proportional to the magnetic flux density. Designed for battery-powered consumer and industrial applications, it offers flexible operating modes (Micropower, Turbo, External-Drive) controlled by a CNTRL pin to optimize power consumption. The device boasts a low typical supply current of 13A in default micropower
-
Linear Hall Effect Sensor GoChip Elec Tech Shanghai GH1321LSY for Current Speed and Pressure Sensing
Product Overview The GH132X series linear Hall effect sensors from GOCHIP ELECTRONICS TECHNOLOGY (Shanghai) CO., LTD. are designed for consumer and industrial electronic products. These sensors offer precise sensitivity and temperature compensation due to internal corrected resistors. They feature a wide operating temperature range of -40 to +150 and a full voltage range (rail-to-rail) output for accurate signal delivery. The GH132X series is suitable for applications such as
-
DIODES AH8503 FDC 7 Linear Hall Effect Sensor Featuring High Accuracy and Consumption for Industrial
Product OverviewThe AH8503 is a high-accuracy, micropower linear Hall-effect sensor featuring an 8-bit output resolution. Its output voltage is ratiometric to the supply voltage and proportional to the magnetic flux density. Designed for battery-powered consumer and industrial applications, it operates from 1.6V to 3.6V. The device offers selectable operating modes (Micropower, Turbo, External-Drive) via a CNTRL pin to optimize power consumption, with typical current draws as
-
Diodes ah3781 p a hall effect latch ic designed for brushless dc motor and linear encoder applications
Product OverviewThe AH3781 is a high-voltage, high-sensitivity Hall Effect latch IC with an internal pull-up resistor, designed for applications such as brushless DC motor commutation, flow meters, linear encoders, and position sensors. It operates over a wide supply range of 3.0V to 28V and features chopper stabilization for superior temperature stability and minimal switch point drift. The device offers robustness with Zener clamps on supply and output pins, and an output
-
hall effect latch ic diodes ah3781 sa 7 with wide temperature range and output overcurrent protection
Product OverviewThe AH3781 is a high-voltage, high-sensitivity Hall Effect latch IC with an internal pull-up resistor. It is designed for applications such as brushless DC motor commutation, flow meters, linear encoders, and position sensors in industrial, consumer home appliance, and personal care sectors. The device operates over a wide supply range of 3.0V to 28V and features chopper stabilization for temperature stability and minimal switch point drift. It offers
-
Micro power omnipolar hall effect switch ic COSEMITECH CH912LSR with temperature stability and consumption
Product OverviewThe Cosemitech CH912/CH912L is a high-sensitivity, extremely temperature-stable micro-power Omnipolar Hall effect switch IC designed for portable and battery-powered consumer equipment, as well as office equipment, home appliances, and industrial applications. It features a hibernating clocking system for minimal power consumption, operating over a supply range of 1.65V to 5.5V. The device activates with either a north or south pole of sufficient magnetic
-
Automotive Hall Effect Sensor DIODES AH3762Q-P-B High Voltage Latch IC with Temperature Compensation
AH3762Q High-Voltage, High-Sensitivity Automotive Hall-Effect Latch The AH3762Q is an AEC-Q100 qualified, high-voltage, high-sensitivity Hall-Effect latch IC designed for automotive applications such as brushless DC-motor commutation, speed measurement, and angular or linear encoders and position sensors. It operates over a wide supply range of 3.0V to 28V, featuring a chopper-stabilized architecture and an internal bandgap regulator for temperature compensation. The device
-
Magnetic Detection Sensor COSEMITECH CH910TB with Low Supply Current and High Frequency Operation
Product OverviewThe CH910/CH910L are Hall effect sensors designed for detecting magnetic poles. They feature a low supply current in both awake and sleep modes, making them suitable for power-sensitive applications. The sensors offer a fast awake time and a configurable period, with a high chopping frequency for efficient operation. They are available in SOT-23-3L and TO-92S packages.Product AttributesBrand: Not specifiedOrigin: Not specifiedMaterial: Not specifiedColor: Not
-
Amp Comparator with Current Sinking Output COSEMITECH CH464ANTB Magnetic Sensing Switching Device
Product OverviewThis document describes an Amp Comparator with current sinking output, available in SOT-23-3L and TO-92S packages. It is designed for applications requiring magnetic sensing and switching, with parameters such as supply current, output saturation voltage, output leakage current, and magnetic thresholds (BOP, BRP) clearly defined.Product AttributesCDM (charged device mode) according to JEDEC EIA/JESD22-C101FTechnical SpecificationsParameterSymbolConditionMinTyp
-
magnetic sensor COSEMITECH CH412SR with output saturation voltage supply current and magnetic threshold switching
Product OverviewThis product is a magnetic sensor designed for various applications. It offers features such as output saturation voltage, supply current, output leakage current, and magnetic thresholds. Available in SOT-23-3L, TO-92S, and SOT-89-3L packages.Product AttributesBrand: Not specifiedOrigin: Not specifiedMaterial: Not specifiedColor: Not specifiedCertifications: Not specifiedTechnical SpecificationsSpecificationDetailsConditionsSupply Current (IDD)20mAStatic
-
Amp comparator COSEMITECH CH92SR with esd clamp protection magnetic field detection and current sinking output
Product OverviewThis product is an amp comparator with current sinking output and ESD clamp protection. It is available in SOT-23-3L, TO-92S, and SOT-89 package types. The device is designed for applications requiring magnetic field detection and output switching based on magnetic thresholds.Product AttributesPackage Types: SOT-23-3L, TO-92S, SOT-89Technical SpecificationsParameterSOT-23-3LTO-92SSOT-89-3LSupply Current (IDD)20mA (Note 1)Output Saturation Voltage (VDSon)3.08V
-
High stability COSEMITECH CH442PNSR sensor designed for demanding applications and stress resistance
Product OverviewThe CHA44XP/CH44XP Hall-effect sensor family offers excellent magnetic parameter performance over temperature and includes an internal pull-up resistor. These AEC-Q100 automotive qualified (CHA44XP) sensors are designed for demanding applications requiring high temperature stability and stress resistance, operating from -40C to 150C. Features include dynamic offset cancellation, a voltage regulator, Hall-voltage generator, amplifier, chopper stabilization,
