Analog and Digital Output
-
Small size fast response MEMS infrared thermopile temperature sensor MFrontier MTP10-A6F8-D25F55 with integrated filter
Product OverviewThe MTP10-A6F8 is a MEMS infrared thermopile temperature sensor featuring an integrated filter and a high-precision NTC thermistor. It is characterized by its small size, fast response time, high sensitivity, and high accuracy, making it widely applicable in various non-contact temperature measurement scenarios.Product AttributesBrand: (MemsFrontier)Origin: Shenzhen, ChinaTechnical SpecificationsParameterIndex/ConditionValueUnitChip SpecificationsChip Area1.8
-
Programmable digital temperature sensor MICROCHIP AT30TS74-SS8M-T with shutdown mode and calibration
Product OverviewThe AT30TS74 is a complete, precise digital temperature sensor designed for measuring local temperatures in various applications. It integrates a high-precision temperature sensor, programmable temperature alarms, and a 2-Wire I2C/SMBus compatible serial interface. The device offers flexibility through user-programmable registers for configuring sensor performance and alarm responses. It features a shutdown mode for low power consumption and is factory
-
Digital temperature sensor MICROCHIP TCN75AVOA713 with multi zone monitoring capability and I2C interface
Product OverviewThe Microchip Technology Inc. TCN75A is a digital temperature sensor that converts temperatures between -40C and +125C to a digital word with typical 1C accuracy. It features user-programmable registers for flexible temperature sensing, allowing for user-selectable resolution from 0.5C to 0.0625C. The device supports power-saving Shutdown and One-shot modes, and can output an alert signal with user-configurable polarity for thermostat or interrupt applications
-
temperature monitoring MICROCHIP AT30TS75A-SS8M-B sensor with programmable temperature limits and alerts
Product OverviewThe Atmel AT30TS75A is a precise digital temperature sensor designed for accurate local temperature monitoring in various applications. It integrates a high-precision sensor, programmable temperature alarms, and a 2-wire I2C/SMBus serial interface. The device offers a wide temperature measurement range (-55C to +125C) with high accuracy (typically 0.5C from 0C to +85C). It features user-configurable resolution, temperature limits, and an ALERT output for
-
surface mount thermistor Littelfuse NSRB103M3T1NET001 for medical equipment and automotive electronics
Product OverviewThe NSRB series surface-mount, end-banded chip thermistors are designed for hybrid substrates, integrated circuits, and printed circuit boards. Featuring solder-coated metallization suitable for wire bond, epoxy, or solder, these thermistors offer uniform dimensional parameters for automated handling. They provide a highly reliable structure and exceptional accuracy, with options for non-standard resistance values, tolerances, and tape and reel packaging.
-
Accurate temperature sensing MICROCHIP TC74A3-5.0VAT sensor with SMBus I2C serial communication port
Product OverviewThe TC74 is a serially accessible, digital temperature sensor designed for low-cost, small-form-factor applications. It provides temperature data as an 8-bit digital word via a 2-wire SMBus/I2C compatible serial port. Key features include solid-state sensing with high accuracy, low power consumption in both operating and standby modes, and a supply voltage range of 2.7V to 5.5V. The TC74 is suitable for thermal protection, monitoring, and thermostat control in
-
Thermal management device MICROCHIP MIC384-1BMM-TR with fault queue failsafe diode fault response and shutdown mode
Product OverviewThe MIC384 is a versatile digital thermal supervisor designed to measure local and two remote temperatures. It features a 2-wire SMBus-compatible interface, programmable thermostat settings, and an open-drain interrupt output. Its fault queues and failsafe response to diode faults prevent nuisance tripping. With a low power shutdown mode and a wide operating voltage range, the MIC384 is ideal for demanding thermal management applications in computers, power
-
MiniMELF Glass Package Surface Mount Thermistor Littelfuse SM501B1K NTC Chip Temperature Component
Littelfuse LL-34 MiniMELF Surface Mount ThermistorsLittelfuse LL-34 MiniMELF style glass encapsulated surface mount thermistors are manufactured using super stable NTC chips hermetically sealed in a glass package. This construction ensures excellent long-term reliability and stability, even under severe environmental or thermal conditions. Their uniform dimensions make them ideal for automatic insertion equipment, offering high temperature capability up to +220C, a hermetical
-
Digital Temperature Sensor MICROCHIP TC77-3.3MOA Featuring SPI Interface for Electronic Applications
Product OverviewThe TC77 is a serially accessible digital temperature sensor designed for low-cost, small-form-factor applications. It outputs temperature data as a 13-bit digital word with SPI and MICROWIRE compatible interfaces. Offering solid-state temperature sensing with high accuracy across a wide operating range, the TC77 features low power consumption in both continuous conversion and shutdown modes, making it ideal for thermal management in various electronic systems
-
Temperature sensing device MICROCHIP MCP9700AT-E/TT analog sensor with consumption and wide voltage range
Product OverviewThe MCP9700/9700A and MCP9701/9701A are analog temperature sensors featuring a Linear Active Thermistor Integrated Circuit (IC). These low-cost, low-power devices convert temperature into an analog voltage, eliminating the need for additional signal-conditioning circuits required by traditional resistive sensors. They are optimized for direct connection to microcontroller Analog-to-Digital Converters (ADCs), offering a typical sensitivity of 10.0 mV/C for the
-
Thermal management IC MICROCHIP MIC384-1BMM with internal sensor external diodes and SMBus interface
Product OverviewThe MIC384 is a versatile digital thermal supervisor designed for comprehensive temperature monitoring. It features local and two remote temperature measurement capabilities, utilizing its internal sensor and external silicon diodes. With a 2-wire SMBus-compatible interface, programmable thermostat settings, and an open-drain interrupt output, the MIC384 offers robust thermal management solutions for various applications, including computers, power supplies,
-
Thermistor Littelfuse NGD3103J3V2NHT001 glass encapsulated 10000 ohms resistance 5 tolerance for building automation and HVAC
Product OverviewThe NGD series glass-encapsulated thermistors are manufactured using exceptionally stable chips, hermetically sealed in a glass package (DO-35, DO-34, DO-41 diode style). This design ensures excellent long-term reliability and stability, even under severe environmental or thermal conditions. Their uniform dimensions and axial configuration are ideal for automatic insertion equipment. Available with various resistance values, tolerances, special lead forms, and
