Analog and Digital Output
-
Temperature sensor Microchip TCN75AVUA713 with programmable registers and active low high comparator output
Microchip TCN75A Digital Temperature SensorThe Microchip TCN75A is a digital temperature sensor that converts ambient temperatures to a digital word with high accuracy. It features user-programmable registers for flexible temperature-sensing applications, allowing for user-selectable resolution, power-saving modes (Shutdown and One-shot), and configurable temperature alert and hysteresis limits. The sensor outputs an alert signal when temperature thresholds are crossed, with
-
thermal protection MICROCHIP TCN75-5.0MOA temperature sensor with programmable set points and hysteresis
TCN75 2-Wire Serial Temperature Sensor and Thermal MonitorThe TCN75 is a serially programmable temperature sensor designed to notify a host controller when ambient temperature exceeds a user-defined set point. It offers programmable hysteresis and features a standard 2-wire serial interface. The device provides solid-state temperature sensing with high accuracy and operates over a wide temperature range. Its interrupt/comparator output can function as an alarm or thermostat.
-
Integrated circuit power supply and serial communication module MFrontier MTP10-A6F55D with four pin interface
Product OverviewThis product features four pins: VDD, SDA, SCL, and GND, indicating its role in power supply and data communication, likely for integrated circuits or modules requiring a serial interface.Product AttributesBrand: Not specifiedOrigin: Not specifiedMaterial: Not specifiedColor: Not specifiedCertifications: Not specifiedTechnical SpecificationsPin NameFunctionVDDPower SupplySDASerial Data LineSCLSerial Clock LineGNDGround2506121200_MFrontier-MTP10-A6F55D
-
MEMS infrared thermopile temperature sensor with fast response and integrated filter MFrontier MTP10-B6F55-L11 Si-A
Product OverviewThe MTP10-B6F55-L11[Si-A] is a MEMS infrared thermopile temperature sensor featuring an integrated filter and a high-precision NTC thermistor. It is characterized by its small size, fast response time, high sensitivity, and high accuracy, making it widely applicable in various non-contact temperature measurement scenarios.Product AttributesBrand: MTP (implied by product name)Origin: Shenzhen MFrontier Electronics Co.,Ltd.Material: Si (implied by [Si-A]
-
Temperature sensor MICROCHIP AT30TSE758A-XM8M-T with 8Kb EEPROM and SMBus compatible serial interface
Product OverviewThe AT30TSE752A/754A/758A are highly accurate digital temperature sensors with integrated nonvolatile registers and serial EEPROM. They feature a 2-wire I2C and SMBus compatible serial interface, supporting SMBus Timeout and Alert functions. With selectable addressing, up to eight devices can be connected on the same bus. These sensors offer a wide operating supply voltage range of 1.7V to 5.5V and are compatible with 400kHz and 1MHz communication speeds. They
-
Surface Mount Thermistor MiniMELF Style Littelfuse WM104J1A Glass Encapsulated for Thermal Stability
Product OverviewLittelfuse LL-34 "MiniMELF" style interchangeable glass encapsulated surface mount thermistors are manufactured using super stable NTC chips. These hermetically sealed devices offer excellent long-term reliability and stability, even under severe environmental or thermal conditions. Their interchangeability eliminates the need for costly individual circuit calibration, and uniform dimensions make them suitable for automatic insertion equipment.Product
-
High accuracy digital temperature sensor MICROCHIP TC72-3.3MUATR with spi interface and 10 bit resolution
Product OverviewThe TC72 is a digital temperature sensor designed for precise temperature monitoring across a wide range, from -55C to +125C. It features a 10-bit resolution, providing 0.25C per bit, and offers high accuracy with a maximum deviation of 2C from -40C to +85C and 3C from -55C to +125C. The sensor communicates via an SPI-compatible interface, eliminating the need for external components. It supports both continuous temperature conversion for real-time monitoring
-
1.8V SMBus temperature sensor MICROCHIP EMC1188-1-AIA-TR with hardware programmable shutdown and REC
Product OverviewThe EMC1188 is a high-accuracy, low-cost, 1.8V System Management Bus (SMBus) compatible temperature sensor designed for complex environmental monitoring applications. It features advanced capabilities such as Resistance Error Correction (REC), Beta Compensation to support modern CPU diodes, and automatic diode type detection. The sensor monitors four temperature channels (three external and one internal) with 1C accuracy. A hardware-programmable system
-
Temperature Sensor MICROCHIP MCP9700-E TO Analog Output Linear Thermistor for Temperature Monitoring
MCP9700/9700A and MCP9701/9701A Low-Power Linear Active Thermistor ICsThe MCP9700/9700A and MCP9701/9701A are analog temperature sensors that convert temperature into an analog voltage. These low-cost, low-power devices offer an integrated solution, eliminating the need for additional signal conditioning circuits typically required by resistive sensors like thermistors. The output voltage can be directly connected to a microcontroller's Analog-to-Digital Converter (ADC). They
-
End Banded Chip Thermistor Littelfuse NSKR103F3J2FET001 with Operating Temperature up to 125 Celsius
Product OverviewThe NSKR series surface-mount, end-banded chip thermistors are designed for use on hybrid substrates, integrated circuits, and printed circuit boards. They feature solder-coated metallization suitable for wire bond, epoxy, or solder contact techniques. Manufactured with advanced equipment, these thermistors offer uniform dimensional parameters for automated handling and placement. The NSKR series provides a highly reliable structure and exceptional accuracy,
-
Digital Temperature Sensor Microchip MCP9801T-MSN with User Selectable Resolution from 9 to 12 Bits
Product OverviewThe Microchip Technology Inc. MCP9800/1/2/3 is a family of digital temperature sensors that convert temperatures ranging from -55C to +125C into a digital word. These sensors offer high accuracy with up to 12-bit resolution and a user-selectable resolution from 9-12 bits. They feature a 2-wire I2C/SMBus compatible interface, low operating current, and power-saving modes like Shutdown and One-shot measurement. The MCP9800/1/2/3 family is suitable for various
-
Compact 3x3mm Non Contact Infrared Temperature Sensor Melexis MLX90632SLD DCB 100 SP with Calibration
MLX90632 FIR SensorThe MLX90632 is a non-contact infrared temperature sensor in a compact 3x3mm SMD SFN package. It offers easy integration and factory calibration, providing external ambient and object temperature calculation. The sensor minimizes the impact of temperature variations around the package, ensuring reliable measurements. It is available in standard and medical accuracy versions, suitable for a wide range of high-precision temperature sensing applications
