<
>
Specifications
Frequency - Center:
38kHz
Transmission Distance:
24m
Viewing Angle:
±50°
Operating Temperature:
-25℃~+85℃
Current - Supply:
350uA
Pd - Power Dissipation:
10mW
Voltage - Supply:
2.5V~5.5V
Mfr. Part #:
TSOP36438TT
Package:
SMD-4P,7.5x5.3mm
Key Attributes
Model Number:
TSOP36438TT
Product Description
Product Overview
The TSOP36... series are miniaturized SMD IR receiver modules designed for infrared remote control systems. These modules integrate a PIN diode and a preamplifier in a single package, featuring an internal IR filter. They are suitable for direct connection to microprocessors for decoding. The TSOP364.. series is optimized to suppress spurious pulses from energy-saving lamps like CFLs, while the TSOP362.. series offers compatibility with older AGC2 designs. These components are not qualified for automotive specifications.
Product Attributes
- Brand: Vishay Semiconductors
- Material Categorization: For definitions of compliance please see www.vishay.com/doc?99912
Technical Specifications
| Part Number | AGC | Carrier Frequency | Application | Taping | Pinning |
| TSOP36230 | LEGACY, FOR LONG BURST REMOTE CONTROLS (AGC2) | 30 kHz | Remote control | TSOP36...TT - top view taped | 1 = GND, 2 = N.C., 3 = VS, 4 = OUT |
| TSOP36430 | RECOMMENDED FOR LONG BURST CODES (AGC4) | 30 kHz | Remote control | TSOP36...TT - top view taped | 1 = GND, 2 = N.C., 3 = VS, 4 = OUT |
| TSOP36233 | LEGACY, FOR LONG BURST REMOTE CONTROLS (AGC2) | 33 kHz | Remote control | TSOP36...TT - top view taped | 1 = GND, 2 = N.C., 3 = VS, 4 = OUT |
| TSOP36433 | RECOMMENDED FOR LONG BURST CODES (AGC4) | 33 kHz | Remote control | TSOP36...TT - top view taped | 1 = GND, 2 = N.C., 3 = VS, 4 = OUT |
| TSOP36236 | LEGACY, FOR LONG BURST REMOTE CONTROLS (AGC2) | 36 kHz | Remote control | TSOP36...TT - top view taped | 1 = GND, 2 = N.C., 3 = VS, 4 = OUT |
| TSOP36436 | RECOMMENDED FOR LONG BURST CODES (AGC4) | 36 kHz | Remote control | TSOP36...TT - top view taped | 1 = GND, 2 = N.C., 3 = VS, 4 = OUT |
| TSOP36238 | LEGACY, FOR LONG BURST REMOTE CONTROLS (AGC2) | 38 kHz | Remote control | TSOP36...TT - top view taped | 1 = GND, 2 = N.C., 3 = VS, 4 = OUT |
| TSOP36438 | RECOMMENDED FOR LONG BURST CODES (AGC4) | 38 kHz | Remote control | TSOP36...TT - top view taped | 1 = GND, 2 = N.C., 3 = VS, 4 = OUT |
| TSOP36240 | LEGACY, FOR LONG BURST REMOTE CONTROLS (AGC2) | 40 kHz | Remote control | TSOP36...TT - top view taped | 1 = GND, 2 = N.C., 3 = VS, 4 = OUT |
| TSOP36440 | RECOMMENDED FOR LONG BURST CODES (AGC4) | 40 kHz | Remote control | TSOP36...TT - top view taped | 1 = GND, 2 = N.C., 3 = VS, 4 = OUT |
| TSOP36256 | LEGACY, FOR LONG BURST REMOTE CONTROLS (AGC2) | 56 kHz | Remote control | TSOP36...TT - top view taped | 1 = GND, 2 = N.C., 3 = VS, 4 = OUT |
| TSOP36456 | RECOMMENDED FOR LONG BURST CODES (AGC4) | 56 kHz | Remote control | TSOP36...TT - top view taped | 1 = GND, 2 = N.C., 3 = VS, 4 = OUT |
Key Specifications
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
| Supply voltage | VS | 2.5 | - | 5.5 | V | |
| Supply current | ISD | - | 0.27 | 0.45 | mA | Ev = 0, VS = 3.3 V |
| Supply current | ISH | - | - | 0.45 | mA | Ev = 40 klx, sunlight |
| Output voltage low | VOSL | - | - | 100 | mV | IOSL = 0.5 mA, Ee = 0.7 mW/m2, test signal see Fig. 1 |
| Minimum irradiance | Ee min. | - | 0.12 | 0.25 | mW/m2 | Pulse width tolerance: tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1 |
| Maximum irradiance | Ee max. | 30 | - | - | W/m2 | tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1 |
| Directivity Angle of half transmission distance | 1/2 | - | 50 | - | ||
| Power consumption | Ptot | - | - | 10 | mW | Tamb 85 C |
| Junction temperature | Tj | - | - | 100 | C | |
| Storage temperature range | Tstg | -25 | - | 85 | C | |
| Operating temperature range | Tamb | -25 | - | 85 | C |
2410121742_VISHAY-TSOP36438TT_C511517.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
