Product Overview
The TSOP36... series are miniaturized SMD IR receiver modules designed for infrared remote control systems. These modules integrate a PIN diode and a preamplifier on a leadframe, with an epoxy package containing an IR filter. The demodulated output signal is directly compatible with microprocessors for decoding. The TSOP364.. series is optimized to suppress spurious pulses from energy-saving lamps like CFLs, though its AGC4 may affect some data signals. The TSOP362.. series is primarily for compatibility with older AGC2 designs, while new designs should favor the TSOP364.. series with AGC4. These components are not qualified for automotive specifications.
Product Attributes
- Brand: Vishay Semiconductors
- Material Categorization: Refer to www.vishay.com/doc?99912 for definitions of compliance.
- Certifications: Not qualified according to automotive specifications.
Technical Specifications
| Part Number | Carrier Frequency | AGC Type | Application | Key Features | Supply Voltage Range | Supply Current (Typical) | Output Voltage Low (Max.) | Minimum Irradiance | Directivity (Half Angle) |
| TSOP36230 | 30 kHz | AGC2 (Legacy) | Remote Control | Compatibility with old AGC2 designs | 2.5 V to 5.5 V | 0.27 mA | 100 mV | 0.12 mW/m | 50 |
| TSOP36430 | 30 kHz | AGC4 (Recommended) | Remote Control | Optimized for CFL suppression | 2.5 V to 5.5 V | 0.27 mA | 100 mV | 0.12 mW/m | 50 |
| TSOP36233 | 33 kHz | AGC2 (Legacy) | Remote Control | Compatibility with old AGC2 designs | 2.5 V to 5.5 V | 0.27 mA | 100 mV | 0.12 mW/m | 50 |
| TSOP36433 | 33 kHz | AGC4 (Recommended) | Remote Control | Optimized for CFL suppression | 2.5 V to 5.5 V | 0.27 mA | 100 mV | 0.12 mW/m | 50 |
| TSOP36236 | 36 kHz | AGC2 (Legacy) | Remote Control | Compatibility with old AGC2 designs | 2.5 V to 5.5 V | 0.27 mA | 100 mV | 0.12 mW/m | 50 |
| TSOP36436 | 36 kHz | AGC4 (Recommended) | Remote Control | Optimized for CFL suppression | 2.5 V to 5.5 V | 0.27 mA | 100 mV | 0.12 mW/m | 50 |
| TSOP36238 | 38 kHz | AGC2 (Legacy) | Remote Control | Compatibility with old AGC2 designs | 2.5 V to 5.5 V | 0.27 mA | 100 mV | 0.12 mW/m | 50 |
| TSOP36438 | 38 kHz | AGC4 (Recommended) | Remote Control | Optimized for CFL suppression | 2.5 V to 5.5 V | 0.27 mA | 100 mV | 0.12 mW/m | 50 |
| TSOP36240 | 40 kHz | AGC2 (Legacy) | Remote Control | Compatibility with old AGC2 designs | 2.5 V to 5.5 V | 0.27 mA | 100 mV | 0.12 mW/m | 50 |
| TSOP36440 | 40 kHz | AGC4 (Recommended) | Remote Control | Optimized for CFL suppression | 2.5 V to 5.5 V | 0.27 mA | 100 mV | 0.12 mW/m | 50 |
| TSOP36256 | 56 kHz | AGC2 (Legacy) | Remote Control | Compatibility with old AGC2 designs | 2.5 V to 5.5 V | 0.27 mA | 100 mV | 0.12 mW/m | 50 |
| TSOP36456 | 56 kHz | AGC4 (Recommended) | Remote Control | Optimized for CFL suppression | 2.5 V to 5.5 V | 0.27 mA | 100 mV | 0.12 mW/m | 50 |
2411272321_VISHAY-TSOP36436TT_C7365552.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
