<
>
Specifications
Frequency - Center:
40kHz
Transmission Distance:
45m
Viewing Angle:
±45°
Operating Temperature:
-25℃~+85℃
Current - Supply:
700uA
Pd - Power Dissipation:
10mW
Voltage - Supply:
2.5V~5.5V
Mfr. Part #:
TSOP4840
Package:
SIP-3-2.54mm
Key Attributes
Model Number:
TSOP4840
Product Description
Product Overview
The TSOP22.., TSOP48.., TSOP24.. and TSOP44.. series are miniaturized IR receiver modules designed for infrared remote control systems. They integrate a PIN diode and preamplifier in a single package with an internal IR filter. These modules offer improved immunity to HF, RF, and optical noise, as well as supply voltage ripple. The demodulated output signal is directly compatible with microprocessors for decoding. The TSOP24../TSOP44.. series are optimized to suppress spurious pulses from Wi-Fi and CFL sources, while the TSOP22../TSOP48.. series are primarily for compatibility with older AGC2 designs. New designs should prefer the TSOP24../TSOP44.. series with newer AGC4.
Product Attributes
- Brand: Vishay Semiconductors
- Material categorization: Available upon request via www.vishay.com/doc?99912
- Certifications: Not qualified according to automotive specifications.
Technical Specifications
| Series | Carrier Frequency | AGC Type | Part Number | Pinning | Dimensions (mm) | Mounting | Application | Best Remote Control Code |
| TSOP48.. | 30 kHz | AGC2 (Legacy) | TSOP4830 | 1=OUT, 2=GND, 3=VS | 6.0 W x 6.95 H x 5.6 D | Leaded | Remote control | |
| TSOP22.. | 30 kHz | AGC2 (Legacy) | TSOP2230 | 1=OUT, 2=VS, 3=GND | Remote control | |||
| TSOP44.. | 30 kHz | AGC4 (Recommended) | TSOP4430 | 1=OUT, 2=GND, 3=VS | Best remote control | RC-5 | ||
| TSOP24.. | 30 kHz | AGC4 (Recommended) | TSOP2430 | 1=OUT, 2=VS, 3=GND | Best remote control | RC-5 | ||
| TSOP48.. | 33 kHz | AGC2 (Legacy) | TSOP4833 | 1=OUT, 2=GND, 3=VS | 6.0 W x 6.95 H x 5.6 D | Leaded | Remote control | |
| TSOP22.. | 33 kHz | AGC2 (Legacy) | TSOP2233 | 1=OUT, 2=VS, 3=GND | Remote control | |||
| TSOP44.. | 33 kHz | AGC4 (Recommended) | TSOP4433 | 1=OUT, 2=GND, 3=VS | Best remote control | RC-6 | ||
| TSOP24.. | 33 kHz | AGC4 (Recommended) | TSOP2433 | 1=OUT, 2=VS, 3=GND | Best remote control | RC-6 | ||
| TSOP48.. | 36 kHz | AGC2 (Legacy) | TSOP4836 | 1=OUT, 2=GND, 3=VS | 6.0 W x 6.95 H x 5.6 D | Leaded | Remote control | |
| TSOP22.. | 36 kHz | AGC2 (Legacy) | TSOP2236 | 1=OUT, 2=VS, 3=GND | Remote control | |||
| TSOP44.. | 36 kHz | AGC4 (Recommended) | TSOP4436 | 1=OUT, 2=GND, 3=VS | Best remote control | Panasonic | ||
| TSOP24.. | 36 kHz | AGC4 (Recommended) | TSOP2436 | 1=OUT, 2=VS, 3=GND | Best remote control | Panasonic | ||
| TSOP48.. | 38 kHz | AGC2 (Legacy) | TSOP4838 | 1=OUT, 2=GND, 3=VS | 6.0 W x 6.95 H x 5.6 D | Leaded | Remote control | |
| TSOP22.. | 38 kHz | AGC2 (Legacy) | TSOP2238 | 1=OUT, 2=VS, 3=GND | Remote control | |||
| TSOP44.. | 38 kHz | AGC4 (Recommended) | TSOP4438 | 1=OUT, 2=GND, 3=VS | Best remote control | NEC | ||
| TSOP24.. | 38 kHz | AGC4 (Recommended) | TSOP2438 | 1=OUT, 2=VS, 3=GND | Best remote control | NEC | ||
| TSOP48.. | 40 kHz | AGC2 (Legacy) | TSOP4840 | 1=OUT, 2=GND, 3=VS | 6.0 W x 6.95 H x 5.6 D | Leaded | Remote control | |
| TSOP22.. | 40 kHz | AGC2 (Legacy) | TSOP2240 | 1=OUT, 2=VS, 3=GND | Remote control | |||
| TSOP44.. | 40 kHz | AGC4 (Recommended) | TSOP4440 | 1=OUT, 2=GND, 3=VS | Best remote control | Sharp | ||
| TSOP24.. | 40 kHz | AGC4 (Recommended) | TSOP2440 | 1=OUT, 2=VS, 3=GND | Best remote control | Sharp | ||
| TSOP48.. | 56 kHz | AGC2 (Legacy) | TSOP4856 | 1=OUT, 2=GND, 3=VS | 6.0 W x 6.95 H x 5.6 D | Leaded | Remote control | |
| TSOP22.. | 56 kHz | AGC2 (Legacy) | TSOP2256 | 1=OUT, 2=VS, 3=GND | Remote control | |||
| TSOP44.. | 56 kHz | AGC4 (Recommended) | TSOP4456 | 1=OUT, 2=GND, 3=VS | Best remote control | r-step, Thomson, RCA | ||
| TSOP24.. | 56 kHz | AGC4 (Recommended) | TSOP2456 | 1=OUT, 2=VS, 3=GND | Best remote control | r-step, Thomson, RCA |
Electrical Characteristics
| Parameter | Test Condition | Symbol | Min. | Typ. | Max. | Unit |
| Supply current | Ev = 0, VS = 5 V | ISD | 0.55 | 0.7 | 0.9 | mA |
| Supply current | Ev = 40 klx, sunlight | ISH | - | 0.8 | - | mA |
| Supply voltage | VS | 2.5 | - | 5.5 | V | |
| Transmission distance | Ev = 0, test signal see Fig. 1, IR diode TSAL6200, IF = 200 mA | d | - | 45 | - | m |
| Output voltage low | IOSL = 0.5 mA, Ee = 0.7 mW/m2, test signal see Fig. 1 | VOSL | - | - | 100 | mV |
| Minimum irradiance | Pulse width tolerance: tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1 | Ee min. | - | 0.12 | 0.25 | mW/m2 |
| Maximum irradiance | Pulse width tolerance: tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1 | Ee max. | 50 | - | - | W/m2 |
| Directivity | Angle of half transmission distance | 1/2 | - | 45 | - | deg |
Absolute Maximum Ratings
| Parameter | Symbol | Value | Unit |
| Supply voltage | VS | -0.3 to +6 | V |
| Supply current | IS | 5 | mA |
| Output voltage | VO | -0.3 to 5.5 | V |
| Voltage at output to supply | VS - VO | -0.3 to (VS + 0.3) | V |
| Output current | IO | 5 | mA |
| Junction temperature | Tj | 100 | C |
| Storage temperature range | Tstg | -25 to +85 | C |
| Operating temperature range | Tamb | -25 to +85 | C |
| Power consumption | Ptot (Tamb 85 C) | 10 | mW |
| Soldering temperature | Tsd (t 10 s, 1 mm from case) | 260 | C |
2410121733_VISHAY-TSOP4840_C145337.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
