Product Overview
This series of IR receiver modules is optimized for long burst remote control systems across various environments. Featuring selectable IC settings (AGC variants), these devices offer enhanced noise immunity against sources like lamps, LCD TVs, and Wi-Fi. The integrated PIN diode and preamplifier, housed in an epoxy package with an IR filter, provide a demodulated output signal directly connectable to a microprocessor for decoding. These components are not qualified for automotive specifications.
Product Attributes
- Brand: Vishay Semiconductors
- Material: Not specified
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Carrier Frequency | AGC Legacy (AGC2) | Recommended for Long Burst Codes (AGC4) | Application Best Choice For | Package | Pinning | Dimensions (mm) | Taping |
| 30 kHz | TSOP77230 | TSOP77430 | RC-5 | Heimdall | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 3.2 D | TSOP77...TT (top view taped, 2200 pcs/reel) TSOP77...TR (side view taped, 2300 pcs/reel) |
| 33 kHz | TSOP77233 | TSOP77433 | RC-6 | Heimdall | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 3.2 D | TSOP77...TT (top view taped, 2200 pcs/reel) TSOP77...TR (side view taped, 2300 pcs/reel) |
| 36 kHz | TSOP77236 | TSOP77436 | Panasonic | Heimdall | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 3.2 D | TSOP77...TT (top view taped, 2200 pcs/reel) TSOP77...TR (side view taped, 2300 pcs/reel) |
| 38 kHz | TSOP77238 | TSOP77438 | NEC | Heimdall | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 3.2 D | TSOP77...TT (top view taped, 2200 pcs/reel) TSOP77...TR (side view taped, 2300 pcs/reel) |
| 40 kHz | TSOP77240 | TSOP77440 | Sharp | Heimdall | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 3.2 D | TSOP77...TT (top view taped, 2200 pcs/reel) TSOP77...TR (side view taped, 2300 pcs/reel) |
| 56 kHz | TSOP77256 | TSOP77456 | r-step, Thomson RCA, Sony, Mitsubishi, Sejin 4PPM, Cisco | Heimdall | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 3.2 D | TSOP77...TT (top view taped, 2200 pcs/reel) TSOP77...TR (side view taped, 2300 pcs/reel) |
Electrical Characteristics
| Parameter | Test Condition | Symbol | Min. | Typ. | Max. | Unit |
| Supply voltage | VS | 2.0 | - | 5.5 | V | |
| Supply current | VS = 3.3 V, Ev = 0 | ISD | 0.25 | 0.35 | 0.45 | mA |
| Supply current | Ev = 40 klx, sunlight | ISH | - | 0.45 | - | mA |
| Transmission distance | Ev = 0, IR diode TSAL6200, IF = 50 mA, test signal see Fig. 1 | d | - | 18 | - | m |
| Output voltage low | IOSL = 0.5 mA, Ee = 0.7 mW/m2, test signal see Fig. 1 | VOSL | - | - | 100 | mV |
| Minimum irradiance | Test signal: RC5 | Ee min. | - | 0.2 | 0.4 | mW/m2 |
| Minimum irradiance | Test signal: NEC code | Ee min. | - | 0.3 | 0.5 | mW/m2 |
| Maximum irradiance | tpi - 4/fo < tpo < tpi + 4/fo | Ee max. | 30 | - | - | W/m2 |
| Directivity | Angle of half transmission distance | 1/2 | - | 50 | - |
Absolute Maximum Ratings
| Parameter | Test Condition | Symbol | Value | Unit |
| Supply voltage | VS | -0.3 to +6 | V | |
| Supply current | IS | 5 | mA | |
| Output voltage | VO | -0.3 to (VS + 0.3) | V | |
| Output current | IO | 5 | mA | |
| Junction temperature | Tj | 100 | C | |
| Storage temperature range | Tstg | -25 to +85 | C | |
| Operating temperature range | Tamb | -25 to +85 | C | |
| Power consumption | Tamb 85 C | Ptot | 10 | mW |
2411272317_VISHAY-TSOP77438TT_C3742818.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible