<
>
Specifications
Mfr. Part #:
CN1016MUU8CE19PP
Package:
Through Hole,P=7.5mm
Key Attributes
Model Number:
CN1016MUU8CE19PP
Product Description
Product Overview
This product is a series of NTC thermistors designed for various applications. They offer precise resistance values with specified tolerances, and are built to withstand demanding environmental and electrical conditions. Key features include a wide operating temperature range, good heat dissipation, and reliable performance under electrical cycling and load life testing. These thermistors are suitable for applications requiring accurate temperature sensing and control.
Product Attributes
- Packaging Options: Bulk, Foldable Tape
Technical Specifications
| Series | Dimension Series | DMAX (mm) | TMAX (mm) | d0.05 (mm) | P0.5 (mm) | Hmax (mm) | L (mm) | R25 () | Resistance Tolerance | (mW/C) | (s) | Imax (A) | Cmax (F) | Material Constant B (K) 10% | Operating Temperature T |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CN05 | CN05** | 6.5 | 5.0 | 0.6 | 5.0 | 12.5 | Cutting leads Or long leads | 15.0 | 20% | ~6 | <22 | 0.6 | 47 | 3000 | -40~150 |
| CN07 | CN07** | 8.5 | 5.0 | 0.6 | 5.0 | 14.5 | Cutting leads Or long leads | 5.0 | 20% | ~10 | <30 | 2.0 | 100 | 2600 | -40~150 |
| CN07 | CN0708M | 8.5 | 5.0 | 0.6 | 5.0 | 14.5 | 8.0 | 20% | ~10 | <30 | 1.0 | 100 | 2600 | -40~150 | |
| CN07 | CN0710M | 8.5 | 5.0 | 0.6 | 5.0 | 14.5 | 10.0 | 20% | ~10 | <30 | 1.0 | 100 | 2800 | -40~150 | |
| CN09 | CN09** | 10.5 | 5.5 | 0.6/0.8 | 5.0/7.5 | 16.5 | Cutting leads Or long leads | 3.0 | 20% | ~11 | <38 | 4.0 | 220 | 2600 | -40~170 |
| CN09 | CN0905M | 10.5 | 5.5 | 0.6/0.8 | 5.0/7.5 | 16.5 | 5.0 | 20% | ~11 | <38 | 3.0 | 220 | 2600 | -40~170 | |
| CN09 | CN0908M | 10.5 | 5.5 | 0.6/0.8 | 5.0/7.5 | 16.5 | 8.0 | 20% | ~11 | <38 | 2.0 | 220 | 2800 | -40~170 | |
| CN09 | CN0910M | 10.5 | 5.5 | 0.6/0.8 | 5.0/7.5 | 16.5 | 10.0 | 20% | ~11 | <38 | 2.0 | 220 | 2800 | -40~170 | |
| CN10 | CN10** | 12.5 | 5.5 | 0.6/0.8 | 5.0/7.5 | 18.5 | Cutting leads Or long leads | 5.0 | 20% | ~13 | <50 | 4.0 | 330 | 2800 | -40~170 |
| CN10 | CN1008M | 12.5 | 5.5 | 0.6/0.8 | 5.0/7.5 | 18.5 | 8.0 | 20% | ~13 | <50 | 3.0 | 330 | 2800 | -40~170 | |
| CN10 | CN1010M | 12.5 | 5.5 | 0.6/0.8 | 5.0/7.5 | 18.5 | 10.0 | 20% | ~13 | <50 | 3.0 | 330 | 2800 | -40~170 | |
| CN10 | CN1016M | 12.5 | 5.5 | 0.6/0.8 | 5.0/7.5 | 18.5 | 16.0 | 20% | ~13 | <50 | 2.0 | 330 | 2900 | -40~170 | |
| CN10 | CN1020M | 12.5 | 5.5 | 0.6/0.8 | 5.0/7.5 | 18.5 | 20.0 | 20% | ~13 | <50 | 2.0 | 330 | 3000 | -40~170 | |
| CN13 | CN134R7M | 14.5 | 6.0 | 0.8 | 7.5 | 20.5 | Cutting leads Or long leads | 4.7 | 20% | ~16 | <70 | 5.0 | 470 | 2800 | -40~170 |
| CN13 | CN1305M | 14.5 | 6.0 | 0.8 | 7.5 | 20.5 | 5.0 | 20% | ~16 | <70 | 5.0 | 470 | 2800 | -40~170 | |
| CN13 | CN1308M | 14.5 | 6.0 | 0.8 | 7.5 | 20.5 | 8.0 | 20% | ~16 | <70 | 4.0 | 470 | 3000 | -40~170 | |
| CN13 | CN1310M | 14.5 | 6.0 | 0.8 | 7.5 | 20.5 | 10.0 | 20% | ~16 | <70 | 4.0 | 470 | 3000 | -40~170 | |
| CN15 | CN152R5M | 16.5 | 6.5 | 0.8/1.0 | 7.5 | 22.5 | Cutting leads Or long leads | 2.5 | 20% | ~20 | <85 | 7.0 | 680 | 2800 | -40~200 |
| CN15 | CN1503M | 16.5 | 6.5 | 0.8/1.0 | 7.5 | 22.5 | 3.0 | 20% | ~20 | <85 | 7.0 | 680 | 2800 | -40~200 | |
| CN15 | CN153R3M | 16.5 | 6.5 | 0.8/1.0 | 7.5 | 22.5 | 3.3 | 20% | ~20 | <85 | 7.0 | 680 | 2900 | -40~200 | |
| CN15 | CN1505M | 16.5 | 6.5 | 0.8/1.0 | 7.5 | 22.5 | 5.0 | 20% | ~20 | <85 | 6.0 | 680 | 3000 | -40~200 | |
| CN15 | CN1510M | 16.5 | 6.5 | 0.8/1.0 | 7.5 | 22.5 | 10.0 | 20% | ~20 | <85 | 5.0 | 680 | 3200 | -40~200 | |
| CN15 | CN1515M | 16.5 | 6.5 | 0.8/1.0 | 7.5 | 22.5 | 15.0 | 20% | ~20 | <85 | 4.0 | 680 | 3200 | -40~200 | |
| CN15 | CN1520M | 16.5 | 6.5 | 0.8/1.0 | 7.5 | 22.5 | 20.0 | 20% | ~20 | <85 | 4.0 | 680 | 3200 | -40~200 | |
| CN20 | CN2005M | 22.5 | 7.0 | 0.8/1.0 | 7.5/10.0 | 28.5 | Cutting leads Or long leads | 5.0 | 20% | ~26 | <110 | 7.0 | 1000 | 3000 | -40~200 |
| CN20 | CN2010M | 22.5 | 7.0 | 0.8/1.0 | 7.5/10.0 | 28.5 | 10.0 | 20% | ~26 | <110 | 6.0 | 1000 | 3200 | -40~200 |
| Reliability Item | Technical Requirement | Test Method/Conditions |
|---|---|---|
| Solder-ability | Uniform tinning on the wetted part, Tinning area 95% | After dipping the lead out end with flux, immerse it in a tin bath at a temperature of 245 5 and a depth of 15mm, with the tin surface 6mm away from the lower end of the NTC body, for 3 0.5 seconds. (Refer to IEC68-2-20 /GB2423.28 Test Ta) |
| Resistance To Soldering Heat | No visible damage, R/RN 20% (R =RN-RN') | Conduct the test according to IEC68-2-20 (GB2423. 28) test Tb. Using the welding groove method, the lead out end is dipped in flux and immersed in a tin groove with a temperature of 260 5 and a depth of 15mm. The tin surface is 6mm away from the lower end of the NTC body and maintained for 10 1 second. After recovering for 4-5 hours under the condition of 25 1 , retest the rated zero power resistance RN '. |
| Strength of lead terminal | No visible damage, R/RN 20% (R =RN-RN') | Conduct the test according to IEC68-2-21 (GB2423. 29) test U. Test Ua: tensile force of 10N for 10 seconds; Test Ub: Bend 90, pull 10N, and continue for 10 seconds; Twist 180, pull 5N, and continue for 10 seconds. After recovering for 4-5 hours under the condition of 25 1 , retest the rated zero power resistance RN '. |
| Temp. Cycling Testing | No visible damage, R/RN 20% (R =RN-RN') | Store for 30 mins each in environment temperature of Ta=-402 and Tb=1502, and cycle 5 times. Each high and low temperature cycle has a transition time of 5minutes in an environment of 251. After conducting temperature cycling tests on the sample, take it out and place it at room temperature (25 1) for 4-5 hours before measuring the zero power resistance RN '. |
| Electrical Cycling Testing | No visible damage, R/RN 20% (R =RN-RN') | Environmental temperature: 25 1 . Cycle count: 1000 times, on/off: 5 s/55 s, test current: 5.0A. After placing the sample at room temperature (25 1 ) for 4-5 hours, measure its zero power resistance RN '. |
| LoadLife (Endurance) Testing | No visible damage, R/RN 20% (R =RN-RN') | Environmental temperature: 25 1 . The sample passes through a maximum working current of 5.0A. After 1000 24 hours, it is taken out and placed at room temperature (25 1 ) for 4-5 hours. The zero power resistance RN 'is measured. |
| Humidity Testing | No visible damage, R/RN 20% (R =RN-RN') | After being placed in an environment with a temperature of 40 2 and a relative humidity of 93 3% for 200 24 hours, take it out and place it at room temperature (25 1 ) for 1-2 hours to measure its zero power resistance RN '. |
| Insulation Withstand voltage | 700VDC, No breakdown or arcing during the test | Take the lead end of the thermistor as one electrode, and wrap the other electrode around the thermistor body with metal foil. Apply a voltage of 700VDC to both electrodes for 60 seconds. |
| Parameter | Unit | Definition |
|---|---|---|
| Zero power resistor R25 | The DC resistance value of the thermistor measured at the specified temperature (251); The measurement should be carried out under the following conditions: the change in resistance value caused by self heating can be negligible relative to the total measurement error. | |
| Resistance tolerance | % | The maximum allowable deviation range of the actual resistance value of the resistor from the nominal value. |
| Thermal dissipation coefficient | mW/C | The power consumed to raise the temperature of the thermistor by 1 , Usually the ratio of power consumption change to temperature change in thermistors at a specified temperature. |
| Thermal time constant | s | The time required for the temperature of a thermistor to drop to 63.2% of its initial and final temperature under zero power conditions. |
| Maximum steady-state current Imax | A | The maximum current that can be continuously applied to a thermistor under ambient temperature conditions of 25 . |
| Maximum impulse capacitance Cmax | F | The maximum allowable capacitance value of a capacitor connected to a thermistor under load conditions. |
| Material Constant B | K | Use the following formula to represent the material constant of negative temperature coefficient thermistors: B=T1T2/(T2-T1)ln (R1/R2) or B=2.303[T1T2/(T2-T1)]log (R1/R2) T1=298.15K(25C), T2 = 323.15K(50C). |
| Working temperature range | Thermistor design allows for continuous operating temperature range in zero power state. |
Storage Conditions
- Temperature: -10+40
- Humidity: 70%RH
- Term: 6 months (First-in/ First-out)
- Place: Do not expose to corrosive or deoxidizing gas, flammable and explosive gases, oil, water, chemical solutions, or direct sunlight, as this may lead to performance degradation or parameter drift.
- Handling after seal open: After unpacking of the minimum package, reseal it promptly or store it inside a sealed container with a drying agent.
2510211530_TyoHM-CN1016MUU8CE19PP_C49241900.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
