Product Description
The TSOP75...W series are miniaturized SMD IR receiver modules designed for infrared remote control systems. They integrate two PIN diodes and a preamplifier on a leadframe, with an IR filter encapsulated in an epoxy package. The demodulated output signal can be directly connected to a microprocessor for decoding. The TSOP754..W series is optimized to suppress spurious pulses from energy-saving lamps like CFLs, though its AGC4 may suppress some data signals. The TSOP752..W series is primarily for compatibility with older AGC2 designs, while new designs should prefer the TSOP754..W series with the newer AGC4. These components are not qualified for automotive specifications.
Product Attributes
- Brand: Vishay Semiconductors
- Material Categorization: Refer to www.vishay.com/doc?99912 for definitions of compliance.
- Certifications: Not qualified according to automotive specifications.
- Special Options: Extended temperature range, narrow optical filter, wide optical filter (details at www.vishay.com/doc?82738, www.vishay.com/doc?81590, www.vishay.com/doc?82726).
Technical Specifications
| Model | Carrier Frequency | AGC Type | Application | Pinning | Dimensions (mm) |
| TSOP75230W | 30 kHz | AGC2 | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75430W | 30 kHz | AGC4 | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75233W | 33 kHz | AGC2 | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75433W | 33 kHz | AGC4 | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75236W | 36 kHz | AGC2 | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75436W | 36 kHz | AGC4 | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75238W | 38 kHz | AGC2 | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75438W | 38 kHz | AGC4 | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75240W | 40 kHz | AGC2 | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75440W | 40 kHz | AGC4 | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75256W | 56 kHz | AGC2 | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75456W | 56 kHz | AGC4 | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
Electrical Characteristics
| Parameter | Test Condition | Symbol | Min. | Typ. | Max. | Unit |
| Supply voltage | VS | 2.5 | - | 5.5 | V | |
| Supply current | Ev = 0, VS = 3.3 V | ISD | - | 0.27 | 0.45 | mA |
| Supply current | Ev = 40 klx, sunlight | ISH | - | - | 0.45 | mA |
| Output voltage low | IOSL = 0.5 mA, Ee = 0.7 mW/m, test signal see Fig. 1 | VOSL | - | - | 100 | mV |
| Minimum irradiance | Pulse width tolerance: tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1 | Ee min. | - | 0.25 | 0.5 | mW/m |
| Maximum irradiance | Pulse width tolerance: tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1 | Ee max. | 30 | - | - | W/m |
| Directivity | Angle of half transmission distance | 1/2 | - | 75 | - |
2411272317_VISHAY-TSOP75438WTR_C3742794.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
