Product Overview
The TSOP75...W series are miniaturized SMD IR receiver modules designed for infrared remote control systems. These modules integrate two PIN diodes and a preamplifier on a leadframe, with an epoxy package containing an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. The TSOP754..W series is optimized to suppress spurious pulses from energy-saving lamps like CFLs, though its AGC4 may suppress some data signals. The TSOP752..W series is primarily for compatibility with older AGC2 designs, while new designs should prefer the TSOP754..W series with the newer AGC4. These components are not qualified for automotive specifications.
Product Attributes
- Brand: Vishay Semiconductors
- Package Type: SMD
- Mounting: SMD
- View Capability: Side or top view
- Profile: Low profile 2.35 mm
- Material Compliance: Refer to www.vishay.com/doc?99912
Technical Specifications
| Part Number | AGC Type | Carrier Frequency | Application | Pinning | Dimensions (mm) |
| TSOP75230W | AGC2 (Legacy) | 30 kHz | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75430W | AGC4 (Recommended) | 30 kHz | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75233W | AGC2 (Legacy) | 33 kHz | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75433W | AGC4 (Recommended) | 33 kHz | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75236W | AGC2 (Legacy) | 36 kHz | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75436W | AGC4 (Recommended) | 36 kHz | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75238W | AGC2 (Legacy) | 38 kHz | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75438W | AGC4 (Recommended) | 38 kHz | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75240W | AGC2 (Legacy) | 40 kHz | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75440W | AGC4 (Recommended) | 40 kHz | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75256W | AGC2 (Legacy) | 56 kHz | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| TSOP75456W | AGC4 (Recommended) | 56 kHz | Remote control | 1, 4 = GND, 2 = VS, 3 = OUT | 6.8 W x 3.0 H x 2.35 D |
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
| Supply voltage | VS | 2.5 | - | 5.5 | V | Tamb = 25 C, unless otherwise specified |
| Supply current | ISD | - | 0.27 | 0.45 | mA | Ev = 0, VS = 3.3 V |
| Supply current | ISH | - | - | 0.45 | mA | Ev = 40 klx, sunlight |
| Transmission distance | d | - | 16 | - | m | Ev = 0, test signal see Fig. 1, IR diode TSAL6200, IF = 50 mA |
| Output voltage low | VOSL | - | - | 100 | mV | IOSL = 0.5 mA, Ee = 0.7 mW/m2, test signal see Fig. 1 |
| Minimum irradiance | Ee min. | - | 0.25 | 0.5 | mW/m2 | Pulse width tolerance: tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1 |
| Maximum irradiance | Ee max. | 30 | - | - | W/m2 | tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1 |
| Directivity | 1/2 | - | 75 | - | - | |
| Power consumption | Ptot | - | - | 10 | mW | Tamb 85 C |
2411272317_VISHAY-TSOP75438WTT_C7074088.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
