<
>
Specifications
γ Value:
0.5
Voltage - Max:
150V
Wavelength - Peak:
540nm
Cell Resistance @ Illuminance:
5kΩ~10kΩ
Dark Resistance:
500kΩ
Mfr. Part #:
GL5516
Package:
Through Hole,P=3mm
Key Attributes
Model Number:
GL5516
Product Description
Product Overview
The GL5 Series LDR Sensor, also known as a photoresistor, is a semiconductor device whose conductivity changes with light intensity. This characteristic allows for its use in various applications requiring light-dependent control. Constructed with epoxy resin encapsulation, these sensors offer good reliability, small size, high sensitivity, fast response speed, and good spectral characteristics. They are widely used in toys, lighting, cameras, and industrial control systems.
Product Attributes
- Type: LDR Sensor
- Series: GL5 Series, GL56 Series
- Encapsulation: Epoxy Resin
Technical Specifications
| Model | Diameter (mm) | Max Voltage (VDC) | Max Power (mW) | Operating Temperature (C) | Spectral Peak (nm) | Resistance at 10Lux (K) | Response Time (ms) - Rise | Response Time (ms) - Fall | Gamma Value | Figure No. |
|---|---|---|---|---|---|---|---|---|---|---|
| GL5516 | 5 | 150 | 90 | -30+70 | 540 | 5-10 | 0.5 | 0.5 | 30 | 2 |
| GL5528 | 5 | 150 | 100 | -30+70 | 540 | 10-20 | 1 | 0.6 | 30 | 3 |
| GL5537-1 | 5 | 150 | 100 | -30+70 | 540 | 20-30 | 2 | 0.6 | 30 | 4 |
| GL5537-2 | 5 | 150 | 100 | -30+70 | 540 | 30-50 | 3 | 0.7 | 30 | 4 |
| GL5539 | 5 | 150 | 100 | -30+70 | 540 | 50-100 | 5 | 0.8 | 30 | 5 |
| GL5549 | 5 | 150 | 100 | -30+70 | 540 | 100-200 | 10 | 0.9 | 30 | 6 |
| GL5606 | 5 | 150 | 100 | -30+70 | 560 | 4-7 | 0.5 | 0.5 | 30 | 1 |
| GL5616 | 5 | 150 | 100 | -30+70 | 560 | 5-10 | 0.8 | 0.6 | 30 | 2 |
| GL5626 | 5 | 150 | 100 | -30+70 | 560 | 10-20 | 2 | 0.6 | 30 | 3 |
| GL5637-1 | 5 | 150 | 100 | -30+70 | 560 | 20-30 | 3 | 0.7 | 30 | 4 |
| GL5637-2 | 5 | 150 | 100 | -30+70 | 560 | 30-50 | 4 | 0.8 | 30 | 4 |
| GL5639 | 5 | 150 | 100 | -30+70 | 560 | 50-100 | 8 | 0.9 | 30 | 5 |
| GL5649 | 5 | 150 | 100 | -30+70 | 560 | 100-200 | 15 | 0.95 | 30 | 6 |
Test Conditions
- Maximum Applied Voltage: Maximum voltage that can be continuously applied to the component in darkness.
- Dark Resistance: Resistance value 10 seconds after turning off the light at 10Lux.
- Maximum Power Dissipation: Maximum power dissipation at an ambient temperature of 25.
- Bright Resistance: Test value under 10Lux light (standard light source, color temperature 2856K) after 2 hours of illumination at 400-600Lux.
- Gamma Value: Logarithm of the ratio of standard resistance values at 10Lux and 100Lux illuminance. = Lg (R10/R100)/Lg (100/10) =Lg(R10/R100) where R10 and R100 are resistance values at 10Lux and 100Lux illuminance respectively (tolerance of is 0.1).
Packaging and Precautions
- Small package: 500 pieces; Large package: 2000 pieces.
- Avoid storing photoresistors in humid or high-temperature environments.
- Recommended soldering is at a distance of 4mm from the ceramic base, ensuring soldering temperature is 260 - 280 and completed within 3 seconds, not exceeding the rated range. Avoid applying external force to the leads during or after soldering. Non-reusable soldering.
Product Applications
- Camera automatic metering
- Photoelectric control
- Indoor light control
- Alarms
- Industrial control
- Light-controlled switches
- Light-controlled lamps
- Electronic toys
2504101957_Senba-Sensing-Tech-GL5516_C125626.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
