Online Service

Online Service

Contact Person
+86 136 6733 2386
quality Thin Film NTC Thermistor Nanjing Shiheng Elec MF55 104F3950 for Temperature Sensing and Control Solutions factory
<
quality Thin Film NTC Thermistor Nanjing Shiheng Elec MF55 104F3950 for Temperature Sensing and Control Solutions factory
>
Specifications
Resistance @ 25℃:
100kΩ
Power(Watts):
50mW
Pitch:
2mm
Operating Temperature:
-40℃~125℃
Tolerance:
±1%
B Constant (25℃/100℃):
-
Steady State Current (Max):
-
Thermal Time Constant:
5s
B Constant (25℃/85℃):
-
B Constant (25℃/75℃):
-
B Constant (25℃/50℃):
3950K
B Constant Tolerance:
±1%
Mfr. Part #:
MF55 104F3950
Package:
Through Hole,P=2mm
Key Attributes
Model Number: MF55 104F3950
Product Description

Product Overview

The Nanjing Shiheng Electronics Technology Co., Ltd. MF55 Thin Film NTC Thermistor is designed for temperature measurement and control applications. It offers precise resistance values and B-values, with a wide operating temperature range of -40 to 125. This component is suitable for applications where accurate temperature sensing is critical, avoiding excessive current to prevent self-heating and measurement errors. It meets stringent reliability standards and is manufactured under ISO9001:2015 and IATF16949:2016 quality management systems.

Product Attributes

  • Brand: Nanjing Shiheng Electronics Technology Co., Ltd.
  • Product Type: Thin Film NTC Thermistor
  • Origin: China
  • Certifications: ISO9001:2015, IATF16949:2016 (Quality Management Systems), ISO14001:2015 (Environmental Management System)

Technical Specifications

Item Symbol Test Condition Unit Performance Requirement
Zero-power resistance at 25 R25 T=250.01, Test Power 0.1mw K 100K1%
B Value B25/50 Ta=250.01, Tb=500.01 K 39501%
Dissipation Factor Still air mW/ 0.8
Time Constant Still air sec 5
Operating Temperature Range / / -40 ~ 125
Maximum Rated Power Pmax / mW 50
Lead Pull Test / Fix thermistor probe, gradually pull lead with 1 Newton force, maintain for (101) seconds / No appearance damage
Solderability Test / Soldering temperature (24510), immersion time: (31) s / 95% tin-plated area
Soldering Heat Resistance Test / Soldering temperature (2605), immersion time: (51)s / R25 R/R 2%
High Temperature Storage Test / 1255, 100024 hours / R25 R/R 3%
Low Temperature Storage Test / -405, 100024 hours / R25 R/R 3%
Steady State Damp Heat Test / 402, 90-95% RH, 240 hours / R25 R/R 3%
Temperature Rapid Change Test / Temperature cycles according to table below (5 cycles) / R25 R/R 3%
Product Model: MF55 104F3950 Marking Explanation: 104: Zero-power resistance at 25 is 100K; 3950: B25/50 value is 3950K / / /

Usage Precautions

  • Product Use: Temperature measurement and control.
  • Current Handling: Avoid excessive current that may cause self-heating and measurement errors.
  • Soldering: For iron soldering, maintain a distance of at least 2mm from the film. Soldering temperature should be below 360, with a soldering time less than 3 seconds.
  • Storage Conditions: Storage temperature: -1040; Storage humidity: 75% RH.
  • Environment: Avoid storage in environments with corrosive gases or direct sunlight.
  • Shelf Life: After opening the package, reseal for storage. Shelf life is 1 year. Products exceeding the shelf life may be re-inspected according to the standard and can be used if they meet the requirements.
  • Heat Shrink Tubing: If using heat shrink tubing during processing, do not use a hot air gun for shrinking. Recommended method: Place the product with the heat shrink tubing into a constant temperature oven at 110 for 10-12 minutes for heat shrinking.

Dimensions

(Dimensions are provided in the original document as a table and an image, not included here due to text-only format constraints. Refer to the original document for visual representation.)

Product Marking

Model: MF55 104F3950

Marking Explanation:

  • 104: Zero-power resistance at 25 is 100K
  • 3950: B25/50 value is 3950K

Appendices

Appendix 1: Resistance-Temperature Characteristics

(Detailed table of temperature vs. resistance values and tolerances is provided in the original document. Key parameters: R25=100K, Tolerance: 1%, B25/50=3950K, Tolerance: 1% (P182-6B2). Refer to the original document for the full table.)

Appendix 2: Resistance Tolerance Curve Diagram

(Diagrammatic representation of resistance tolerance is provided in the original document. Refer to the original document for the diagram.)

Contact Information

Company: Nanjing Shiheng Electronics Technology Co., Ltd.

Address: No. 18 Jinyang Road, Hushu Town, Jiangning District, Nanjing City, China

Postal Code: 211121

Tel: 025-52121868

Fax: 025-52122373

E-mail: sales@shiheng.com.cn

Website: Http://www.shiheng.com.cn


1912111437_Nanjing-Shiheng-Elec-MF55-104F3950_C394028.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max