<
>
Specifications
Mfr. Part #:
PKGS-00LDP1-R
Package:
SMD,2.8x6.4mm
Key Attributes
Model Number:
PKGS-00LDP1-R
Product Description
Murata PKGS-00LDP1-R Acceleration Sensor
The Murata PKGS-00LDP1-R is a surface mountable acceleration sensor designed for hard-disk drive applications in personal computers and consumer audio devices. It features a construction with a piezo ceramic element sandwiched between two ceramic substrates.
Product Attributes
- Brand: Murata
- Part Number: PKGS-00LDP1-R
- Origin: Japan (Murata Manufacturing Co., Ltd.)
Technical Specifications
| Parameter | Test Condition | Min. | Typ. | Max. | Units | Note |
|---|---|---|---|---|---|---|
| Electric Charge Sensitivity | 1kHz, 98.1m/s2(10G) applied in the direction of D axis at Fig.1 | -15% | 85.7 {0.840} | +15% | fC/(m/s2) {pC/G} | 1,2,5 |
| Insulation Resistance | 10V DC, after 1 min. | 500 | 10000 | M | ||
| Non-Linearity | % of the Full-Scale output at 490 m/s2(50G). Range : 50G | 1% | 5% | % | ||
| Resonance Frequency | 17 | 20 | kHz | 3 | ||
| Inclined Angle of Sensitivity Axis | Maximum deviation from initial value at +25C. | -3 | 0 | +3 | Degree | |
| Electric Charge Sensitivity Temperature Drift | Maximum deviation from initial value at +25C Ta:70C | 0% | +4% | % | ||
| Electric Charge Sensitivity Temperature Drift | Maximum deviation from initial value at +25C Ta:0C | -5% | -2.5% | 0% | % | |
| Capacitance | 1Vrms,1kHz | -30% | 770 | +30% | pF | |
| Voltage Sensitivity | 1kHz, 98.1m/s2(10G) applied in the direction of D axis at Fig.1 | {1.10} | {mV/G} | 1,2,4 | ||
| Mechanical Shock | 14700m/s2(1500G) half sine pulse of 0.5 ms duration | 7-1 | ||||
| Vibration | 1.5 mm amplitude with 10 to 55 Hz band for 2 hours | 7-2 | ||||
| Bend Strength PCB | PCB deflected 1 mm below horizontal level | 7-3 | ||||
| Resistance to Reflow Soldering | Peak Temperature: Within 10 sec. at 260 C | 7-4 | ||||
| Solderability | +2455C for 30.5 seconds | 75% min. | % | 7-5 | ||
| High Temperature | +852C for 1000 hours | 8-1 | ||||
| Low Temperature | -402C for 1000 hours | 8-2 | ||||
| Humidity | 90 to 95% R.H. at +602C for 500 hours | 8-3 | ||||
| Heat Shock | -40C for 30 min, then +85C for 30 min, 10 cycles | 8-4 |
Notes
1. As measured with an applied acceleration in the direction of D at figure 1. In this case, positive voltage and electrical charge are generated at electrode B.
2. 1[G] = 9.80665 [m/s2]
3. Resonance frequency of inner bimorph element.
4. Input impedance of measurement circuit is 10 M(Zi), and amplified gain is 0 dB.
5. f (femto)= 10-15
2411220057_muRata-PKGS-00LDP1-R_C152583.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
