Product Overview
The MHT153PTBT is a high-quality, reliable, and cost-effective LED SMD product from Lianyungang Meihua Electronics Technology Co.,Ltd. Designed for top-view applications, this 1206 package LED offers fast response times and low power requirements. It is ROHS compliant and Pb-free, making it an environmentally conscious choice. Key features include high intensity, stability, and a black lens type. This product is suitable for various applications requiring infrared reception.
Product Attributes
- Brand: Lianyungang Meihua Electronics Technology Co.,Ltd
- Part Number: MHT153PTBT
- Package: 1206 SMD
- View: Top view
- Lens Type: Black
- Chips Material: Silicon
- Emitted Color: Infrared Reception (PT)
- Certifications: ROHS Compliant, Pb FREE PRODUCTS
- Origin: China
Technical Specifications
| Parameter | Symbol | Test Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Collector-Emitter Breakdown Voltage | BVCEO | Ic = 500 uA, Ee = 0mw/cm2 | 60 | - | - | V |
| Emitter-Collector Breakdown Voltage | BVCEO | IE = 50 uA, Ee = 0mw/cm2 | 7 | - | - | V |
| Collector Dark Current | ICEO | VCE=10V, Ee=0mw/cm2 | - | - | 50 | uA |
| Collector-Emitter Saturation Voltage | VCE(S) | Ic = 5mA, Ee=1mw/cm2 | - | - | 0.4 | V |
| Rise / Fall Time | TR/TF | VCE=5V, IC=1mA, RL=1000 | - | 15/15 | - | uS |
| On State Collector Current | IC(ON) | VCE=5V, Ee=0.1mw/cm2 | 3 | - | - | mA |
| Peak Sensitivity Wavelength | P | - | - | 940 | - | nm |
| Range Of Spectral Bandwidth | 0.5 | - | 730 | - | 1100 | nm |
| Collector Current Bin Range (Ee=0.1mw/cm2, Vce=5V) | ||||||
| Bin | Ic,A | Grade | 3.0-4.0 | - | - | mA |
| Bin | Ic,B | Grade | 4.0-5.0 | - | - | mA |
| Bin | Ic,C | Grade | 5.0-6.0 | - | - | mA |
| Bin | Ic,D | Grade | 6.0-10 | - | - | mA |
| Bin | Ic,E | Grade | 10-14 | - | - | mA |
Absolute Maximum Ratings (Ta=25)
| Parameter | Symbol | Rating | Unit |
|---|---|---|---|
| Collector-Emitter Voltage | VCEO | 30 | V |
| Emitter-Collector Voltage | VECO | 5 | V |
| Collector Current | IC | 20 | mA |
| Power Dissipation | Pc | 75 | mW |
| Operating Temperature Range | TOPR | -25 to 85 | |
| Storage Temperature Range | TSTG | -45 to 85 | |
| Soldering Temperature | TSOL | 260 |
Package Dimensions
All dimensions are in millimeters (inches). Tolerance is 0.1mm unless otherwise specified.
Reliability Test Items and Conditions
| No. | Items | Test Condition | Test Hours/Cycles | Sample Size | Ac/Re |
|---|---|---|---|---|---|
| 1 | Reflow Soldering | 260/10sec. | 6 Min. | 22pcs | 0/1 |
| 2 | Thermal Shock | H : +100 5min 10 sec L : -10 5min | 300 Cycles | 22pcs | 0/1 |
| 3 | Temperature Cycle | H : +100 15min 5 min L : -40 15min | 300 Cycles | 22pcs | 0/1 |
| 4 | High Temperature/Humidity Reverse Bias | Ta=85,85%RH | 1000 Hrs. | 22pcs | 0/1 |
| 5 | Low Temperature Storage | Ta=-40 | 1000 Hrs. | 22pcs | 0/1 |
| 6 | High Temperature Storage | Ta=100 | 1000 Hrs. | 22pcs | 0/1 |
| 7 | DC Operation Life | VCE=5V | 1000 Hrs. | 22pcs | 0/1 |
Soldering Conditions
| Method | Soldering Conditions | Remark |
|---|---|---|
| Reflow Soldering | 260 for 10 sec/1 time. | |
| Soldering Iron | 350 for 3 sec/1 time. | Soldering iron capacity 25W. |
Notes:
- Reflow soldering should not be done more than two times.
- When soldering, do not put stress on the LEDs during heating.
- After soldering, do not warp the circuit board.
- Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen).
Packing
Minimum packing amount is 2000 pcs per reel.
Storage
The LED should be stored at 30 or less and 70% RH or less after being shipped from MH, and the storage life limits are 3 months. Meihuas LED lead frames are comprised of a stannum plated iron alloy. The silver surface may be affected by environments which contain corrosive gases and so on. Please avoid conditions which may cause the LED to corrode, tarnish or discolor. This corrosion or discoloration may cause difficulty during soldering operations. It is recommended that the LED be used as soon as possible. Please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur.
Application Restrictions
- Specifications described in this document may be changed without notice. Meihua reserves the right to make material changes for the above specifications.
- When using this product, please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. Meihua assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets.
- These specification sheets include materials protected under copyright of Meihua Corporation. Please do not reproduce or cause anyone to reproduce them without Meihuas consent.
- ESD (Electrostatic Discharge): The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability. When handling the products, the following measures against electrostatic discharge are strongly recommended: Eliminating the charge, Grounded wrist strap, ESD footwear, clothes, and floors, Grounded workstation equipment and tools, ESD table/shelf mat made of conductive materials. Proper grounding is required for all devices, equipment, and machinery used in product assembly. Surge protection should be considered when designing of commercial products. If tools or equipment contain insulating materials such as glass or plastic, the following measures against electrostatic discharge are strongly recommended: Dissipating static charge with conductive materials, Preventing charge generation with moisture, Neutralizing the charge with ionizers.
- The LEDs should be operated with forward bias. The driving circuit must be designed so that the LEDs are not subjected to forward or reverse voltage while it is off. If reverse voltage is continuously applied to the LEDs, it may cause migration resulting in LED damage.
2409272202_MEIHUA-MHT153PTBT_C2764888.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
