<
>
Specifications
Current - Collector(Ic):
2mA
Collector - Emitter Voltage VCEO:
30V
Current - Dark(Id):
100nA
Peak Wavelength:
940nm
Viewing Angle:
-
Operating Temperature:
-35℃~+85℃
Mfr. Part #:
MHL524PT03CRT
Package:
Through Hole,D=5mm
Key Attributes
Model Number:
MHL524PT03CRT
Product Description
Product Overview
The MHL524PT03BRT LED LAMP from Lianyungang Meihua Electronics Technology Co.,Ltd is an infrared reception LED lamp designed for high-speed response and high output power. It features a 5mm diameter package with a water-clear lens type and utilizes silicon chips. This Pb-free product is suitable for various applications requiring sensitive infrared detection.
Product Attributes
- Brand: Lianyungang Meihua Electronics Technology Co.,Ltd
- Part Number: MHL524PT03BRT
- Emitted Color: Infrared reception
- Chips Material: Silicon
- Lens Type: Water Clear
- Certifications: RoHS compliant
- Origin: China
Technical Specifications
| Parameter | Symbol | Test Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Absolute Maximum Ratings (Ta=25) | ||||||
| Power Dissipation Per Segment | PAD | 10 | mW | |||
| Reverse Voltage | VR | 30 | V | |||
| Operating Temperature Range | TOPR | -35 | 85 | |||
| Storage Temperature Range | TSTG | -35 | 85 | |||
| Optical-Electrical Characteristic (Ta=25) | ||||||
| Collector-Emitter Breakdown Voltage | BVCEO | Ic = 100 uA, Ee = 0 mw/cm | 30 | V | ||
| Emitter-Collector Breakdown Voltage | BVCEO | Ic = 100 uA, Ee = 0 mw/cm | 5 | V | ||
| Collector Dark Current | ICEO | VCE=10V, Ee=0 mw/cm | 100 | nA | ||
| Collector-Emitter Saturation Voltage | VCE(S) | Ic = 2mA, Ee=0.5mw/cm | 0.4 | V | ||
| Rise / Fall Time | TR/TF | VCE=5V, IC=1mA, RL=1000 | 15/15 | uS | ||
| On Stat Collector Current | IC | VCE=5V, Ee=0.1mw/cm | 2 | mA | ||
| Peak Sensitivity Wavelength | P | 940 | nm | |||
| Bin Requirements (Ee=0,Ic=100A,5ms) | ||||||
| Collector-Emitter Breakdown Voltage | Vceo | >30 | V | |||
| Emitter-Collector Breakdown Voltage | Veco | >5 | V | |||
| Collector-Emitter Dark Leakage Current | Iceo | 0.1 | A | |||
| Collector Light Current (Bin C) | Ic | Ee=0.1mw/cm,Vce=5V | 1.6-2.6 | mA | ||
| Collector Light Current (Bin D) | Ic | Ee=0.1mw/cm,Vce=5V | 2.6-3.6 | mA | ||
| Collector Light Current (Bin E) | Ic | Ee=0.1mw/cm,Vce=5V | 3.6-4.6 | mA | ||
| Collector Light Current (Bin F) | Ic | Ee=0.1mw/cm,Vce=5V | 4.6-5.6 | mA | ||
Dimensions
All dimensions are in millimeters (inches). Tolerance is 0.25mm (0.010") unless otherwise specified. Protruded resin under flange is 1.5mm (0.059") max.
Soldering
Dip Soldering
- Bath temperature: 260 max
- Immersion time: within 5 sec, 1 time
- Solder no closer than 2mm from the base of the package
- Recommended flux: Resin Flux
Soldering Iron
- Soldering iron power: 30W or smaller
- Temperature at tip of iron: 260 or lower
- Soldering time: within 5 sec
- Take care not to press the tip of iron against the PIN to prevent heat transfer.
Storage
- Store at 30 or less and 70% RH or less for up to 3 months.
- Avoid environments with corrosive gases that may cause oxidation, tarnishing, or discoloration of the lead frames, as this can lead to soldering difficulties.
- Avoid rapid transitions in ambient temperature, especially in high humidity environments where condensation can occur.
Application Restrictions
- Specifications are subject to change without notice.
- Observe absolute maximum ratings and usage instructions.
- Handle with care to prevent electrostatic discharge (ESD). Recommended measures include grounded wrist straps, ESD footwear, clothing, floors, and workstations.
- Operate LEDs with forward bias. Ensure driving circuits do not subject LEDs to forward or reverse voltage when off to prevent damage.
2409272302_MEIHUA-MHL524PT03CRT_C405263.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
