Online Service

Online Service

Contact Person
+86 136 6733 2386
quality Absolute angle sensor Magn Tek MT6501GT-ADD featuring AMR technology and overcurrent protection for sensing factory
<
quality Absolute angle sensor Magn Tek MT6501GT-ADD featuring AMR technology and overcurrent protection for sensing factory
>
Specifications
Current - Supply:
12mA
Voltage - Supply:
4.5V~5.5V
Interface:
SPI
Mfr. Part #:
MT6501GT-ADD
Package:
TSSOP-16
Key Attributes
Model Number: MT6501GT-ADD
Product Description

Product Overview

The Magntek MT6501 is a next-generation absolute angle position sensor IC based on advanced Anisotropic Magnetoresistance (AMR) technology. It offers high-reliability non-contact angle measurement with a 0-360 detection range. The sensor integrates two pairs of AMR Wheatstone bridges and specialized signal processing circuits, enabling it to respond to directional changes in magnetic fields parallel to the chip surface, independent of field strength. This design reduces sensitivity to magnet manufacturing errors and installation tolerances. The MT6501 features overvoltage and overcurrent protection, programmable detection ranges and output curves, and offers selectable analog, PWM, and switch outputs. It supports 12-bit resolution for analog or PWM outputs and is available in SOP-8 and TSSOP-16 packages compliant with EU RoHS standards. Ideal for industrial and automotive applications such as throttle position detection, steering wheel angle sensing, and pedal position monitoring.

Product Attributes

  • Brand: Magntek
  • Technology: Anisotropic Magnetoresistance (AMR)
  • Certifications: EU RoHS

Technical Specifications

Parameter Description Conditions Min Typical Max Unit
Electrical Characteristics
VDD Power Supply Voltage 4.5 5.0 5.5 V
IDD Operating Current (after startup) Single-channel SOP-8 6 9 mA
IDD Operating Current (after startup) Dual-channel TSSOP-16 12 18 mA
IDDPU Peak Transient Current (during startup) Single-channel SOP-8 60 mA
IDDPU Peak Transient Current (during startup) Dual-channel TSSOP-16 120 mA
FS System Clock Frequency Range -10 - 10 %
FR Analog Output Refresh Rate - 4,000 - Hz
FPWM PWM Frequency (programmable) Customer programmable -8% (of typical) 976/488/244/122 +8% (of typical) Hz
TSTEP Step Response Time - - 1,000 s
TSU Power-on Settling Time - - 15 ms
IOUT Analog Output Current Analog output mode -15 - 15 mA
ISHORT Output Short Circuit Current (with overcurrent protection) Short to ground / Short to power - - 25 mA
RL Analog Output Load Resistance External pull-up resistor to ground 5,000 - -
RL Analog Output Load Resistance External pull-down resistor to power 1,000 - -
VSAT_LO Analog Output Low Level Saturation Voltage External pull-up resistor RL 1K - 2 4 % VDD
VSAT_HI Analog Output High Level Saturation Voltage External pull-down resistor RL 5K 95 97 - % VDD
CLAMP_LO Analog Output Low Level Clamp Voltage Programmable 2 - - % VDD
CLAMP_HIGH Analog Output High Level Clamp Voltage Programmable - - 98 % VDD
SR Analog Output Slew Rate Load capacitance CL 10nF 50 - - V/ms
SR Analog Output Slew Rate Load capacitance CL 100nF 100 - - V/ms
PWM_VOL PWM Output Low Level Open-drain mode (Iout=10mA) - - 7 % VDD
GPIO_VOL General Purpose Digital I/O Low Level Push-pull output (Iout=5mA) - - 5 % VDD
GPIO_VOH General Purpose Digital I/O High Level Push-pull output (Iout=5mA) 90 - - % VDD
GPIO_VIL General Purpose Digital I/O Input Low Level - - 30 % VDD
GPIO_VIH General Purpose Digital I/O Input High Level 70 - - % VDD
TRISE Digital Output Rise Time Push-pull output (RL=10K, CL=10nF) - 3.0 - s
TFALL Digital Output Fall Time Push-pull output (RL=10K, CL=10nF) - 1.8 - s
Accuracy
INL Integral Non-Linearity -1 - 1 degree
INL_TD Integral Non-Linearity Temperature Drift -40~150 -0.5 - 0.5 degree
ANG_NOI Input Equivalent Noise (RMS) (Excluding DAC noise) - 0.01 0.02 degree
ERM Analog Output to Supply Voltage Ratio Error -0.1 - 0.1 % VDD
DAC_RES ADC Resolution - 12 - bit
DAC_FS ADC Full Scale - 99 - %
DAC_FS_TD ADC Full Scale Temperature Drift -40~150 -0.3 - 0.3 % VDD
DAC_OS ADC Offset Voltage -0.5 - 0.5 % VDD
DAC_OS_TD ADC Offset Voltage Temperature Drift -40~150 -0.25 - 0.25 % VDD
DAC_NOI ADC Noise (RMS) - 0.03 - % VDD
External Magnetic Field Parameters
Dmag Magnet Diameter Recommended 8.0mm - 8.0 - mm
Tmag Magnet Thickness Recommended 2.5mm - 2.5 - mm
Bpk Input Magnetic Field Strength Measured at chip surface 300 - 10,000 Gauss
AG Gap Distance between chip surface and magnet - - 3.0 mm
RS Rotation Speed - - 300 RPM
TCmag1 Magnet Temperature Coefficient NdFeB magnet - -0.12 - %/C
TCmag2 Magnet Temperature Coefficient SmCo magnet - -0.035 - %/C
Package Information
Model Description
MT6501CT-ADD SOP-8 package, Tube (100pcs/tube) or Tape & Reel (3000pcs/reel)
MT6501GT-ADD TSSOP-16 package, Tube (60pcs/tube) or Tape & Reel (3000pcs/reel)
SOP-8 Package Dimensions
Parameter Unit: mm (Min/Max) Unit: inch (Min/Max)
A 1.350 / 1.750 0.053 / 0.069
A1 0.100 / 0.250 0.004 / 0.010
A2 1.250 / 1.550 0.049 / 0.061
b 0.330 / 0.510 0.013 / 0.020
c 0.170 / 0.250 0.007 / 0.010
D 4.700 / 5.100 0.185 / 0.201
E 5.800 / 6.200 0.228 / 0.244
E1 3.800 / 4.000 0.150 / 0.157
e 1.270 (BSC) 0.050 (BSC)
L 0.400 / 1.270 0.016 / 0.050
0 / 8 0 / 8
X 1.97 / 2.27 0.078 / 0.089
Y 1.34 / 1.70 0.053 / 0.067
Z 0.42 / 0.62 0.016 / 0.024
TSSOP-16 Package Dimensions
Parameter Unit: mm (Min/Max) Unit: inch (Min/Max)
D 4.900 / 5.100 0.193 / 0.201
E 6.250 / 6.550 0.246 / 0.258
b 0.190 / 0.300 0.007 / 0.012
c 0.090 / 0.200 0.004 / 0.008
E1 4.300 / 4.500 0.169 / 0.177
A 1.200 0.047
A2 0.800 / 1.000 0.031 / 0.039
A1 0.050 / 0.150 0.002 / 0.006
e 0.65 (BSC) 0.026 (BSC)
L 0.500 / 0.700 0.020 / 0.028
H 0.25 (TYP) 0.01 (TYP)
1 / 7 1 / 7
X1 1.650 / 1.890 0.065 / 0.074
X2 3.110 / 3.350 0.122 / 0.132
Y 2.080 / 2.320 0.081 / 0.093
Z 0.210 / 0.370 0.016 / 0.024

Application Scenarios

  • Absolute angle position detection
  • Electronic Power Steering (EPS) control for steering wheels
  • Gear shifter angle control
  • Throttle pedal angle control
  • Throttle valve angle control
  • Non-contact potentiometer applications

2404091719_Magn-Tek-MT6501GT-ADD_C5451786.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max