<
>
Specifications
Mfr. Part #:
HC5F500-S
Key Attributes
Model Number:
HC5F500-S
Product Description
Product Overview
The LEM HC5F500-S is an open-loop automotive current transducer utilizing Hall effect technology for the electronic measurement of DC, AC, or pulsed currents. It provides galvanic isolation between the high-power primary circuit and the low-voltage electronic secondary circuit. Designed for automotive applications, it offers a choice of peak current ranges within a single housing, featuring good accuracy, linearity, and low thermal drift.
Product Attributes
- Brand: LEM
- Primary Current Measuring Range: up to 500 A
- Power Supply: Unipolar + 5 V DC
- Operating Temperature Range: -40C to +125C
- Output Voltage: Full ratiometric
- Housing Material: PA66-GF25
- Magnetic Core Material: FeSi alloy
- Pins Material: Copper alloy base tin plated (lead free)
- Mass: 21 g
- Certifications: IEC 60664 Part 1, JESD22-A114-B, ISO 16750-3&4.1.2.1.2.1
Technical Specifications
| Parameter | Symbol | Unit | Specification | Conditions | Min | Typical | Max |
| Electrical Data | |||||||
| Primary current, measuring range | IP | A | -500 | 500 | |||
| Supply voltage | VC | V | 1) | 4.75 | 5.00 | 5.25 | |
| Output voltage (Analog) | VOUT | V | VOUT = (VC/5) x (2.5 +0.004 x IP ) | @ VC | |||
| Sensitivity | G | mV/A | @ VC = 5 V | 4 | |||
| Current consumption | IC | mA | 12 | 20 | |||
| Load resistance | RL | K | 10 | ||||
| Capacitive loading | CL | nF | 4.7 | ||||
| Output internal resistance | ROUT | 10 | |||||
| Ambient operating temperature | TA | C | -40 | 125 | |||
| Performance Data | |||||||
| Sensitivity error | G | % | @ TA = 25C; VC = 5 V | -2 | 2 | ||
| Electrical offset | IOE | A | TA = 25C | 1 | |||
| Magnetic offset | IOM | A | @ After excursion to IP; TA = 25C | -1.6 | 1 | 1.6 | |
| Offset current | IO | A | TA = 25C | 2.7 | |||
| Average temperature coefficient of IOE | TCIOEAV | mA/C | @ - 40C < T < 125C; VC | -20 | 5 | 20 | |
| Average temperature coefficient of G | TCGAV | %/C | @ - 40C < T < 125C; VC | -0.05 | 0.025 | 0.05 | |
| Linearity error | L | % | IP | -1 | 1 | ||
| Response time | tr | s | 8 | 10 | |||
| Frequency bandwidth | BW | kHz | 2) @ - 3 dB | 30 | |||
| Output voltage low | VOUTL | V | @ VC = 5 V | 0.1 | |||
| Output voltage high | VOUTH | V | @ VC = 5 V | 4.9 | |||
| Output voltage noise peak-peak | Vno p-p | mV | DC to 1 MHz | 16 | |||
| Output voltage noise rms | Vno rms | mV | DC to 1 MHz | 2.4 | |||
| Absolute Maximum Ratings (Not Operating) | |||||||
| Supply over voltage | VC | V | No operating, 1 min@ 25C | 7 | |||
| Reverse voltage | V | Not applicable | No operating | ||||
| Output over voltage | Vout | V | No operating | -0.5 | VC + 0.5 | ||
| Continuous output current | Iout | mA | No operating | -10 | 10 | ||
| Output short-circuit duration | tC | min | 2 | ||||
| Maximum admissible vibration | m.s | ISO 16750-3&4.1.2.1.2.1 | 200 | ||||
| Rms voltage for AC insulation test | Vd | kV | 50 Hz, 1 min IEC 60664 Part 1 | 1.5 | |||
| Electrostatic discharge voltage | VESD | kV | JESD22-A114-B | 2 | |||
| Ambient storage temperature | TS | C | tested after 64H @-55C connected | -55 | 150 | ||
| Clearance distance | dCI | mm | 1.7 | ||||
| Creepage distance | dCp | mm | 2.55 | ||||
2411271906_LEM-HC5F500-S_C454761.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
