<
>
Specifications
Resistance @ 25℃:
10Ω
Power(Watts):
-
Pitch:
5mm
Operating Temperature:
-40℃~+200℃
B Constant (25℃/100℃):
-
Tolerance:
±20%
Steady State Current (Max):
1A
Diameter (φD):
7mm
Thermal Time Constant:
27s
B Constant (25℃/85℃):
-
B Constant (25℃/75℃):
-
B Constant Tolerance:
-
B Constant (25℃/50℃):
-
Mfr. Part #:
206RV164
Package:
Through Hole,P=5mm
Key Attributes
Model Number:
206RV164
Product Description
NTC Thermistor 206RV164 NTC 10D-7
The NTC Thermistor 206RV164 NTC 10D-7 is a Negative Temperature Coefficient Resistor whose resistance decreases as ambient temperature increases. It is manufactured from 2 or 4 types of metal oxides (iron, nickel, cobalt, manganese, or copper) shaped and sintered at high temperatures. This thermistor features a black coating and inwardly bent leads.
Product Attributes
- Wrapper Material: Phenolic aldehyde
- Lead Material: Tinned Electron Wire
- Coating Color: Black
Technical Specifications
| Item | Specification Request | Test Conditions | Approximate Value |
|---|---|---|---|
| Nominal Resistance (251) | 1020% | ||
| Max Steady State Current (25) | 1A | ||
| Thermal Time Constant | 27S | ||
| Thermal Dissipation Constant | 16mW/ | ||
| Operating Range | -40~+200 | ||
| Approximate Resistance Value at Maximum Current | 0.616 | ||
| Max Shock Capacity | 150 uf/240V | ||
| Zero Power Resistance | See Electrical Parameters | At 25, when resistance change due to internal heating is negligible | |
| B-Value | See Electrical Parameters | Calculated using zero power resistance at 25 and 50 | |
| Thermal Dissipation Constant | See Electrical Parameters | Ratio of power dissipation change to corresponding temperature change | |
| Thermal Time Constant | See Electrical Parameters | Time for temperature to reach 63.2% of difference between initial and final temperatures under zero power | |
| Leads Terminal Tensile Strength | No visible damage, Resistance change: 20% | 1.0kg load applied to lead for 10 sec | |
| Leads Terminal Bend Strength | No visible damage, Resistance change: 20% | Fixed body, 0.5kg load on one terminal, bend 90 and back, then opposite direction | |
| Vibration | No substantial damage | Frequency: 10~50Hz, Amplitude: 1.55mm, X,Y,Z axes for 2 hrs each | |
| Solderability | Covered termination: 98% | Solder bath: 2355, Time: 3S | |
| Solder Heat Resistance | Resistance change: 10% | Dipped in molten solder 35010, 4.00.8mm deep, 3.00.5 sec, left for 24 hrs | |
| Dry Heat (High Temperature Storage) | Resistance change: 10% | 1252 for 1000+48 hours, left for 1-2 hrs | |
| Cold (Low Temperature Storage) | Resistance change: 10% | -403 for 1000+48 hours, left for 1-2 hrs | |
| Humidity Test | Resistance change: 10% | 402, 95%RH, 1000HR | |
| Temperature Cycle Test | Resistance change: 20% | -40/30 25/5 +125/30 25/5 | |
| Operating Temperature | Allowable temperature range while thermistor works continuously | -40 to +200 | |
| Storage Conditions | -10~40, RH75% |
2504211835_KNSCHA-206RV164_C48392647.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
