<
>
Specifications
Resistance @ 25℃:
10Ω
Power(Watts):
-
Pitch:
7.5mm
Operating Temperature:
-40℃~+200℃
B Constant (25℃/100℃):
-
Tolerance:
±20%
Steady State Current (Max):
5A
Diameter (φD):
15mm
Thermal Time Constant:
1.25min
B Constant (25℃/85℃):
-
B Constant (25℃/75℃):
-
B Constant Tolerance:
-
B Constant (25℃/50℃):
-
Mfr. Part #:
206RV162
Package:
Through Hole,P=7.5mm
Key Attributes
Model Number:
206RV162
Product Description
Product Overview
The NTC Thermistor is a Negative Temperature Coefficient Resistor designed to decrease in resistance as ambient temperature increases. It is manufactured from 2 or 4 types of metal oxides (iron, nickel, cobalt, manganese, or copper) that are shaped and sintered at high temperatures. This series, specifically the 206RV162 NTC 10D-15, features a nominal resistance of 10, a chip diameter of 15mm, and a pitch of 7.5mm, with black coated, inwardly bent leads.
Product Attributes
- Brand: Not specified
- Origin: Not specified
- Material (Wrapper): Phenolic aldehyde
- Material (Down-lead): Tinned Electron Wire
- Coating Color: Black
- Certifications: Not specified
Technical Specifications
| Item | Specification Request | Test Conditions | Specification Request |
| Nominal Resistance (251) | 1020 | ||
| Max Steady State Current (25) | 5A | ||
| Thermal Time Constant (approx.) | 75S | ||
| Thermal Dissipation Constant (approx.) | 21mW | ||
| Operation Range | -40~+200 | ||
| Approximate Resistance Value at Maximum Current () | 0.18 | ||
| Max Shock Capacity (uf/240V) | 680 | ||
| Zero Power Resistance | At 25, where resistance change due to internal heating is negligible. | See Electrical Parameters | |
| B Value | Calculated using zero power resistance at 25 and 50. | See Electrical Parameters | |
| Thermal Dissipation Constant | Ratio of power dissipation change to corresponding temperature change at specified temperature. Unit: mw/ | See Electrical Parameters | |
| Thermal Time Constant | Time for thermistor body temperature to reach 63.2% of the difference between initial and final temperatures under zero power condition. | See Electrical Parameters | |
| Leads Terminal Tensile Strength | No visible damage; Resistance change: 20% | 1.0kg load applied to each lead for 10 sec. | |
| Leads Terminal Bend Strength | No visible damage; Resistance change: 20% | Fixed body, 0.5kg load on one terminal, bend 90, return, bend 90 in opposite direction. | |
| Vibration | No substantial damage | Frequency: 10~50Hz, Amplitude: 1.55mm, Direction and time: X, Y, Z axes each 2 hours. | |
| Solderability | Covered termination: 98% | Solder bath Temperature: 2355, Time: 3S | |
| Solder Heat Resistance | Resistance change: 10% | Dipped in molten solder (35010) for 3.00.5 sec to a depth of 4.00.8mm. Left at room ambient for 24 hours before measurement. | |
| Dry Heat (High Temperature Storage) | Resistance change: 10% | Ambient: 1252 for 1000+48 hours. Left at room ambient for 1 to 2 hours before measurement. | |
| Cold (Low Temperature Storage) | Resistance change: 10% | Ambient: -403 for 1000+48 hours. Left at room ambient for 1 to 2 hours before measurement. | |
| Humidity Test | Resistance change: 10% | 402, 95% RH, 1000 HR | |
| Temperature Cycle Test | Resistance change: 20% | -40/30 25/5 +125/30 25/5 | |
| Operating Temperature | -40~+200 | Allowable temperature range for long-term continuous operation. | |
| Storage Conditions | RH75% | -10~40 |
2504211840_KNSCHA-206RV162_C48392846.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
