Product Overview
The KP200 is a PRO-SIL pressure sensor specifically designed for detecting pressure changes within a vehicle door during a side crash event. It provides a digital Manchester encoded output signal proportional to the relative pressure change (p/p0), ensuring that the signal height is independent of ambient pressure. This cost-optimized solution enables autonomous operation without additional logic ICs in the pressure satellite. The sensor is qualified for automotive applications according to AEC-Q100.
Product Attributes
- Brand: PRO-SIL
- Product Type: Pressure sensor for side crash detection
- Qualification: Automotive applications, AEC-Q100
Technical Specifications
| Parameter | Symbol | Values | Unit | Note or Test Condition |
|---|---|---|---|---|
| Product Name | KP200 | |||
| Ordering Code | SP000849342 | |||
| Package | PG-DSOF-8-16 | |||
| Synchronous Data Transmission Modes | PSI5-P10P-500/3L, PSI5-P10P-250/1L | |||
| Asynchronous Data Transmission Mode | PSI5-A10P-250/1L | Sends Manchester frame every 228 s clock variation | ||
| Compatibility | AK-LV 29 compatible | |||
| Interface | 2-wire interface with on chip current modulator for Manchester communication | |||
| Memory | E2PROM for ID number, calibration and mode selection | |||
| Voltage Regulator | On chip | |||
| Signal Type | Relative pressure signal (p/p0-signal) | |||
| Supply voltage (VDD) | VDD | 4.5 11.0 | V | Operating range |
| Voltage on I_OUT | Viout | 3.5 11.0 | V | Operating range |
| Voltage on CAP | VCAP | 4.5 11.0 | V | Operating range; connector only defined to connect with a capacitor |
| Ambient operating temperature | TOp | -40 85 | C | Operating range |
| Absolute operating pressure range | pabs | 50.9 126.5 | kPa | Range for pressure pulses during a crash |
| Ambient operating pressure range | pamb | 53.6 110.0 | kPa | Range for p0 value |
2411200037_Infineon-KP200XTMA2_C3253739.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible