<
>
Specifications
Mfr. Part #:
RTP180LVEAA
Key Attributes
Model Number:
RTP180LVEAA
Product Description
Product Overview
The RTY Series and RTP Series Hall-effect Rotary Position Sensors offer non-contact sensing for demanding transportation and industrial environments at a competitive price. The RTY Series features an integral shaft with or without a lever, while the RTP Series separates the magnet from the sensor, eliminating bearing wear from radial forces. Both series utilize a Hall-effect IC to convert rotary actuator movement into a linear output, housed in a rugged, IP69K-qualified package. They provide eight operating ranges (50 to 360), are tolerant to over-travel, and support input voltages from 4.5 Vdc to 30 Vdc.
Product Attributes
- Brand: Honeywell
- Certifications: CE
- Protection: IP69K-qualified rugged package, Automotive-grade EMI/EMC testing, integrated reverse polarity, and short circuit protection.
Technical Specifications
| Characteristic | RTY Series (LV/HV) | RTP Series (LV/HV) |
|---|---|---|
| Expected life | 35 M cycles | infinite rotation |
| Air gap: bare magnet actuator | 3,00 mm 0.5 mm [0.12 in 0.02 in] | |
| Air gap: housed magnet actuator | 2,00 mm 0.5 mm [0.08 in 0.02 in] | |
| Material: shaft | stainless steel | |
| Material: magnet | NdFeB | |
| Material: sensor housing | PBT plastic | PBT plastic |
| Material: housed magnet overmold | PPS plastic | |
| Material: sensor/housed magnet bushing | brass | |
| Material: sensor bushing | stainless steel | |
| Mating connector | AMP Superseal 282087-1 | AMP Superseal 282087-1 |
| Mounting screw sizes: sensor to mounting surface | M5 screws and 10 mm [0.39 in] OD washers | M4 X 0.7 screws and 8 mm [0.31 in] OD washers |
| Mounting screw sizes: lever to mounting surface | M6 screws | |
| Mounting screw sizes: housed magnet actuator to actuator mounting | M3 X 0.5 plain cup point set screws | |
| Supply voltage | 5 0.5 Vdc (LV) 10 Vdc to 30 Vdc (HV) | 5 0.5 Vdc (LV) 10 Vdc to 30 Vdc (HV) |
| Supply current: normal | 20 mA max. (LV) 25 mA max. (HV) | 32 mA max. (LV) 47 mA max. (HV) |
| Supply current: during output to ground short | 20 mA max. (LV) 25 mA max. (HV) | 32 mA max. (LV) 47 mA max. (HV) |
| Output: standard | 0.5 Vdc to 4.5 Vdc ratiometric | 0.5 Vdc to 4.5 Vdc ratiometric |
| Output: inverted | 4.5 Vdc to 0.5 Vdc ratiometric | 4.5 Vdc to 0.5 Vdc ratiometric |
| Output: standard (non-ratiometric) | 0.5 Vdc to 4.5 Vdc non-ratiometric | 0.5 Vdc to 4.5 Vdc non-ratiometric |
| Output: inverted (non-ratiometric) | 4.5 Vdc to 0.5 Vdc non-ratiometric | 4.5 Vdc to 0.5 Vdc non-ratiometric |
| Output signal delay | 4 ms typ. | 4 ms typ. |
| Overvoltage protection | 10 Vdc (LV) | 10 Vdc (LV) |
| Reverse polarity protection | -10 Vdc (LV) -30 Vdc (HV) | -10 Vdc (LV) -30 Vdc (HV) |
| Output to ground short circuit protection | continuous | continuous |
| Resolution | 12 bit | 12 bit |
| Output load resistance (pull down to ground) | 10 kOhm typ. | 10 kOhm typ. |
| EMI: radiated immunity | 100 V/m per ISO11452-2 from 200 MHz to 1000 MHz | 100 V/m per ISO11452-2 from 200 MHz to 1000 MHz |
| EMI: conducted immunity | 100 mA BCI per ISO11452-4 from 1 MHz to 200 MHz | 100 mA BCI per ISO11452-4 from 1 MHz to 400 MHz |
| Operating temperature range | -40 C to 125 C [-40 F to 257 F] | -40 C to 125 C [-40 F to 257 F] |
| Ingress protection | IP69K | IP69K |
| Media compatibility | heavy transportation fluids | heavy transportation fluids |
| Shock | 50 G peak | 50 G peak |
| Vibration | 20 G peak | 20 G peak |
| Salt fog concentration | 5% 1% for 240 hr per SAE J1455 Section 4.3.3.1 (at 5.0 Vdc, 38 C [100 F ]) | 5% 1% for 240 hr per SAE J1455 Section 4.3.3.1 (at 5.0 Vdc, 38 C [100 F ]) |
| Salt fog concentration (bare magnet) | 96 hr for as per ASTM B117 | |
| Salt fog concentration (housed magnet) | 240 hr per ASTM B117 |
2411220144_Honeywell-RTP180LVEAA_C1561943.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
