Product Overview
The RTY Series and RTP Series Hall-effect Rotary Position Sensors offer non-contact sensing for demanding transportation and industrial environments at a competitive price. The RTY Series features integral shafts with or without levers, while the RTP Series separates the magnet from the sensor body for enhanced durability. Both series utilize Hall-effect technology to convert rotary movement into a linear output, housed in rugged, IP69K-qualified packages. They provide true non-contact operation, long product life, and robust protection against electrical and environmental stresses, with multiple operating ranges and voltage options.
Product Attributes
- Brand: Honeywell
- Certifications: CE, UKCA
- Material: Stainless steel (shaft, bushing), PBT plastic (sensor housing, housed magnet overmold), PPS plastic (housed magnet), NdFeB (magnet), Brass (sensor bushing)
- Protection: IP69K-qualified, Automotive-grade EMI/EMC testing, integrated reverse polarity, and short circuit protection
Technical Specifications
| Characteristic | RTY Series | RTP Series | ||
| LV (Low Voltage) | HV (High Voltage) | LV (Low Voltage) | HV (High Voltage) | |
| Expected life | 35 M cycles | 35 M cycles | infinite rotation | infinite rotation |
| Supply voltage | 5 0.5 Vdc | 10 Vdc to 30 Vdc | 5 0.5 Vdc | 10 Vdc to 30 Vdc |
| Supply current (max) | 20 mA | 25 mA | 32 mA | 47 mA |
| Output: standard | 0.5 Vdc to 4.5 Vdc ratiometric | 0.5 Vdc to 4.5 Vdc non-ratiometric | 0.5 Vdc to 4.5 Vdc ratiometric | 0.5 Vdc to 4.5 Vdc non-ratiometric |
| Output: inverted | 4.5 Vdc to 0.5 Vdc ratiometric | 4.5 Vdc to 0.5 Vdc non-ratiometric | 4.5 Vdc to 0.5 Vdc ratiometric | 4.5 Vdc to 0.5 Vdc non-ratiometric |
| Output signal delay | 4 ms typ. | 4 ms typ. | 4 ms typ. | 4 ms typ. |
| Overvoltage protection | - | 10 Vdc | - | 10 Vdc |
| Reverse polarity protection | -10 Vdc | -30 Vdc | -10 Vdc | -30 Vdc |
| Output to ground short circuit protection | continuous | continuous | continuous | continuous |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit |
| Output load resistance (pull down to ground) | 10 kOhm typ. | 10 kOhm typ. | 10 kOhm typ. | 10 kOhm typ. |
| EMI radiated immunity | 100 V/m per ISO11452-2 (200 MHz - 1000 MHz) | 100 V/m per ISO11452-2 (200 MHz - 1000 MHz) | 100 V/m per ISO11452-2 (200 MHz - 1000 MHz) | 100 V/m per ISO11452-2 (200 MHz - 1000 MHz) |
| EMI conducted immunity | 100 mA BCI per ISO11452-4 (1 MHz - 200 MHz) | 100 mA BCI per ISO11452-4 (1 MHz - 400 MHz) | 100 mA BCI per ISO11452-4 (1 MHz - 200 MHz) | 100 mA BCI per ISO11452-4 (1 MHz - 400 MHz) |
| Operating temperature range | -40 C to 125 C | -40 C to 125 C | -40 C to 125 C | -40 C to 125 C |
| Ingress protection | IP69K | IP69K | IP69K | IP69K |
| Shock | 50 G peak | 50 G peak | 50 G peak | 50 G peak |
| Vibration | 20 G peak | 20 G peak | 20 G peak | 20 G peak |
| Salt fog concentration | 5% 1% for 240 hr per SAE J1455 | 5% 1% for 240 hr per SAE J1455 | 5% 1% for 240 hr per SAE J1455 | 5% 1% for 240 hr per SAE J1455 |
| Air gap: housed magnet actuator | - | - | 2,00 mm 0.5 mm | 2.002,00 mm max. |
| Mounting screw sizes: sensor to mounting surface | M5 screws and 10 mm OD washers | M5 screws and 10 mm OD washers | M5 screws and 10 mm OD washers | M5 screws and 10 mm OD washers |
| Mounting screw sizes: housed magnet actuator to actuator mounting | - | - | M4 X 0.7 screws and 8 mm OD washers | M4 X 0.7 screws and 8 mm OD washers |
| Mounting screw sizes: shaft | M3 X 0.5 plain cup point set screws | M3 X 0.5 plain cup point set screws | - | - |
2411200143_Honeywell-RTY270HVEAX_C17519707.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
