<
>
Specifications
Resistance @ 25℃:
5Ω
Pitch:
5.08mm
Operating Temperature:
-40℃~+150℃
Tolerance:
±20%
Steady State Current (Max):
1A
Thermal Time Constant:
18s
B Constant (25℃/85℃):
2700K
B Constant Tolerance:
±5%
Mfr. Part #:
MZ05005C1IA00
Package:
Through Hole,P=5.08mm
Key Attributes
Model Number:
MZ05005C1IA00
Product Description
Product Overview
This document specifies the characteristics and performance of the MZ05005C1IA00 5D-5 thermistor. It is designed for applications requiring temperature-dependent resistance, with a rated zero-power resistance of 5 at 25C. The thermistor features a silicon coating, green color, and straight leads. It operates within a wide temperature range of -40C to +150C and is suitable for various electronic applications where precise temperature sensing or current limiting is required.
Product Attributes
- Brand: (DERSONIC)
- Origin: (DONGGUAN DERSONIC ELECTRONIC CO., LTD.)
- Material (Coating): Silicon
- Color (Coating): Green
- Leads: Tin-plated steel wire
- Certifications: IEC410 / DIN ISO 2859-1 (GB/T2828.1-2012)
Technical Specifications
| Item | Specification | Test Conditions & Methods |
| 1. APPEARANCE () | ||
| Dimensions (mm) | D:7.0, T:4.5, F:5.01.0, d:0.60.06, L:18 | |
| Coating | Coating () | Material: Silicon (), Color: Green () |
| Leads | Straight () | Material: Tin-plated steel wire () |
| 2. Parameters of Technology () | ||
| Rated Zero-Power Resistance (R25) | 5 | Detailed in Appendix |
| Material Constant ( B25/85) | 2700K | Detailed in Appendix |
| Max. Steady State Current () | 1A | Detailed in Appendix |
| Thermal Dissipation Constant () | 6 mW/C | Detailed in Appendix |
| Thermal Time Constant ( ) | 18 s | Detailed in Appendix |
| Operating Temperature Range () | -40C+150C | |
| 3. INSPECTION () | ||
| Lot Inspection () | Sampling with IEC410 / DIN ISO 2859-1 (GB/T2828.1-2012) | Testing with SPEC.NO.: R05D050MU21BGOB |
| Appearance () | AQL 0.65 | |
| Rated Zero-Power Resistance (RN) | AQL 0.65 | |
| Soldering-ability () | S-2 AQL 2.5 | |
| Max. Steady State Current () | S-2 AQL 2.5 | |
| 4. STORAGE CONDITIONS () | ||
| Temperature () | -10+40 | |
| Humidity () | 70%RH | |
| Term () | 6 months (First-in/ First-out) | |
| Place () | Avoid corrosive gas, flammable/explosive gases, oil, water, chemical liquid, sunlight. | |
| Handling after seal open | Reseal promptly or store in a sealed container with a drying agent. | |
| 5. WARNING (!) | ||
| Do not apply under conditions exceeding Imax, rated temperature range, or with inferior thermal dissipation to avoid deterioration, destruction, or fire. | ||
| 6. Appendix () - MECHANICAL CHARACTERISTICS () | ||
| Solder-ability () | Terminals shall be uniformly tinned, area95% | Dipping in soldering bath 2355 for 2-3s. |
| Resistance To Soldering Heat () | No visible mechanical damage. R/RN 20% | Dipping in soldering bath 2605 for 101s. Recover 4-5h at 252. |
| Strength of lead terminal () | No break out. R/RN 20% | Apply force up to 10N (10sec) and 90 bend at 5N (10sec). Recover 4-5h at 252. |
| 7. Appendix () - ELECTRICAL CHARACTERISTICS () | ||
| Rated Zero-Power Resistance ( RN) | 5.020% | Ambient temp. 252. Testing voltage: 1.5VDC. Measure after 1-2 hours. |
| Thermal Dissipation Constant () | 6 mW/C | Calculated by P/T at specified ambient temperature. |
| Thermal Time Constant ( ) | 18 s | Time to reach 63.2% of ambient temp. change under zero power. |
| Material Constant ( B) | 27005% K | B=T1T2/(T2-T1)Ln(R1/R2), T1=298.15K, T2=358.15K. |
| Max. Steady State Current () | 1.0A | Ambient temp. 252. Testing Current: 1.0A. |
| 8. Appendix () - Reliability Test () | ||
| Temp. Cycling Testing () | No visible mechanical damage. RN / RN 20% | -405/30min252/5min1505/30min252/5min. Cycles: 5times. Recover 4~5h at 252. |
| Electrical Cycling Testing () | No visible mechanical damage. RN / RN 20% | Ambient temp. 252. Cycles: 1,000times. On/Off: 1m/5m. Test Current: 1.0A. Recover 4~5h at 252. |
| Load Life (Endurance) Testing () | No visible mechanical damage. RN / RN 20% | Ambient temp. 252; 1.0A/ 1,00024h. Recover 4~5h at 252. |
| Humidity Testing () | No visible mechanical damage. RN / RN 20% | 402, 933% R.H., 100024 h. Recover 4~5h at 252. |
2411220218_Dersonic-MZ05005C1IA00_C2921239.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
