<
>
Specifications
Standby Current:
8mA
working temperature:
-40℃~+125℃
Current Range:
±150A
Voltage - Supply:
5V
Band Width:
250kHz
Response Time (tr):
2.5us
Sensitivity:
13.33mV/A
Bidirectional Current Detection:
Support
Mfr. Part #:
AN1V 150 PB20
Package:
SIP,17x10mm
Key Attributes
Model Number:
AN1V 150 PB20
Product Description
AN1V PB20 Current Sensor
The AN1V PB20 series are open-loop current sensors based on the Hall effect, utilizing AISC technology for proportional output that remains stable despite power supply variations. They offer isolation between the primary and secondary sides, resulting in no insertion loss and a small form factor. These sensors are designed for measuring DC, AC, and pulse currents.
Product Attributes
- Brand: (Chipsensor)
- Origin: 2 C4500
- Certifications: UL 94-V0
- Standards: IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 6109-1:2010
Application Fields
- AC variable frequency drives
- Uninterruptible Power Supplies (UPS)
- DC motor drive static converters
- Switch Mode Power Supplies (SMPS)
- Welding machine power supplies
- Battery management
- Wind energy converters
Technical Specifications
| Parameter | Symbol | Unit | AN1V 50 PB20 | AN1V 100 PB20 | AN1V 150 PB20 | AN1V 200 PB20 | Notes | |
| Maximum Limits | ||||||||
| Supply Voltage | VC | V | 6.5 | Exceeding limits may cause permanent damage. | ||||
| ESD-Contact Discharge | VESD | V | 8000 | Exceeding limits may cause permanent damage. | ||||
| Environmental and Product Structure Characteristics | ||||||||
| Operating Temperature | TA | -40 to 150 | ||||||
| Storage Temperature | TS | -55 to 150 | ||||||
| Primary Resistance | RP | 100 | ||||||
| Mass | g | 5 | ||||||
| Insulation Characteristics | ||||||||
| AC Isolation Withstand Voltage (RMS@50Hz,1min) | Vd | kV | 4.8 | Ref: IEC 60664-1 | ||||
| Housing Material | - | - | UL94-V0 | |||||
| Comparative Tracking Index | CTI | PLC | 2 | Reinforced Insulation, Ref: IEC 61800-5-1, IEC 62109-1 CAT III, PD2 | ||||
| Product Characteristics (Test Conditions: TA = 25, VC = 5V, RL = 10k unless otherwise specified) | ||||||||
| Primary Rated Current (RMS) | IPN | A | -50 to 50 | -100 to 100 | -150 to 150 | -200 to 200 | ||
| Supply Voltage | VC | V | 4.5 to 5.5 | |||||
| Zero Offset Voltage | VQOV | V | VCC/2 | |||||
| Theoretical Gain | Gth | mV/A | 40 | 20 | 13.33 | 10 | ||
| Current Consumption | IC | mA | 8 to 11 | |||||
| Load Resistance | RL | k | 5.1 | |||||
| Load Capacitance | C2 | nF | 1 to 10 | |||||
| Supply Filter Capacitor | C1 | nF | 100 | |||||
| Gain Error | G | % | -1 to 1 | |||||
| Gain Error Temp. Drift | TCG | % | -1.5 to 1.5 | @TA=-40~150 (50,100), -40~125 (150), -40~85 (200) | ||||
| Zero Offset Error | VOE | mV | -10 to 10 | @VC=5V, IP=0A | ||||
| Zero Offset Error Temp. Drift | TCVOE | mV | -10 to 10 | @TA=-40~150 (50,100), -40~125 (150), -40~85 (200) | ||||
| Magnetic Offset Voltage | VOM | mV | 4 | @VC=5V, after IPN | ||||
| Non-linearity Error | L | % of IPN | -1 to 1 | Excluding VOE | ||||
| Accuracy @ IPN | X | % of IPN | -2 to 2 | @TA=-40~150 (50,100), -40~125 (150), -40~85 (200) | ||||
| Response Time @ 90% IPN | tr | s | 2.5 to 5 | @C2=1nF | ||||
| Output Bandwidth (-3dB) | BW | kHz | 250 | @C2=1nF | ||||
| Output Noise Voltage | Vno | mV | 5 | 2.7 | 1.8 | 1.4 | @C2=1nF | |
Product Dimensions
Unit: mm, General Tolerance: 0.3 mm. Busbar and pin material: Tin-plated copper.
Note: Vout increases when IP flows from pin 4 to pin 5.
2407311056_CHIPSENSE-AN1V-150-PB20_C30584740.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
