<
>
Specifications
working temperature:
-40℃~+85℃
Current Range:
-90A~6A
Voltage - Supply:
-15V~-12V;12V~15V
Response Time (tr):
500ns
Bidirectional Current Detection:
Support
Mfr. Part #:
CS3A 50 P01
Package:
Through Hole
Key Attributes
Model Number:
CS3A 50 P01
Product Description
Product Description
The CS3A P01 series are closed-loop Hall effect current sensors designed for measuring DC, AC, and pulse currents. They offer isolation between the primary and secondary sides, excellent linearity, high accuracy, low temperature drift, and no insertion loss. These sensors are suitable for various industrial applications.
Product Attributes
- Brand: (Xinsen)
- Primary and secondary side isolation
- Materials comply with UL 94-V0
- Certifications: EN50178: 1997, IEC 61010-1: 2000, UL 508: 2010
Application Scenarios
- AC variable frequency drives, servo motors
- Uninterruptible Power Supplies (UPS)
- DC motor drive static converters
- Switch Mode Power Supplies (SMPS)
- Welding machine power supplies
- Battery management
- Wind energy converters
- Test and measurement equipment
Technical Specifications
| Parameter | Symbol | Unit | CS3A 50 P01 (Typical) | CS3A 100 P01 (Typical) | Notes |
|---|---|---|---|---|---|
| Maximum Limits | |||||
| Supply Voltage | VC | V | 18 | ||
| Primary Busbar Temperature | TB | 100 | Exceeding limits may cause permanent damage or reduce reliability. | ||
| Environmental and Structural Characteristics | |||||
| Operating Temperature | TA | -40 to 85 | |||
| Storage Temperature | TS | -40 to 90 | |||
| Mass | g | 25 | |||
| Standards | EN 50178, IEC 61010-1, UL 508C | ||||
| Insulation Characteristics | |||||
| AC Isolation Voltage Test (RMS @ 50Hz, 1min) | Vd | kV3 | |||
| Impulse Withstand Voltage (1.2/50s) | VW | kV7 | |||
| Creepage Distance (Primary and Secondary) | dCp | mm | 6.7 | ||
| Clearance (Primary and Secondary) | dCI | mm | 6.7 | ||
| Housing Material | UL94-V0 | ||||
| Comparative Tracking Index (CTI) | CTI | PLC | 3 | Reinforced Insulation (ref. EN 50178, EN 61010-1) | |
| Application Instance | 300V CAT III PD2 | ||||
| Application Instance | 600V CAT III PD2 | Basic Insulation (ref. EN 50178, EN 61010-1) | |||
| Electrical Characteristics (TA = 25, VC = 15V, RM = 30 unless otherwise specified) | |||||
| Primary Rated Current (RMS) | IPN | A50 | 100 | ||
| Primary Current Measuring Range | IPM | A-90 to 90 | -150 to 150 | ||
| Measuring Resistance | RM | 0 to 30 | 0 to 30 | Values depend on VC, TA, and IPM | |
| Secondary Rated Current (RMS) | ISN | mA50 | 100 | ||
| Secondary Current Measuring Range | ISP | mA-90 to 90 | -150 to 150 | ||
| Secondary Coil Resistance | RS | 30 @ 70 | |||
| Coil Turns | NS | - | 1000 | ||
| Theoretical Gain | Gth | mA/A1.0 | |||
| Supply Voltage | VC | V12 to 15 (5%) | |||
| Current Consumption | IC | mA30+IS | |||
| Offset Current | IO | mA-0.2 to 0.2 | Typical 0.1 | ||
| Offset Current Temp. Drift | IOT | mA-0.5 to 0.5 | Typical 0.3 @ -40~85 | ||
| Magnetic Offset Current | IOM | mA-0.2 to 0.2 | Typical 0.1 @ IP=0 after 1xIPN | ||
| Gain Error | G | % | -0.1 to 0.1 | Excluding IO | |
| Linearity Error (0IPN) | L | % of IPN | -0.1 to 0.1 | Excluding IO | |
| Accuracy @ IPN | X | % of IPN | -0.5 to 0.5 | Typical 0.3. Excluding IO | |
| Response Time (@ 90% of IPN) | tr | s | 0.5 | ||
| Bandwidth (-1dB) | BW | kHz150 | |||
2504101957_CHIPSENSE-CS3A-50-P01_C42441959.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
