Product Overview
The AN1V PB22 series are open-loop Hall effect current sensors based on ASIC technology. They provide an output proportional to the primary current, featuring isolation between primary and secondary sides. These sensors are designed for measuring DC, AC, and pulse currents and are suitable for various industrial applications.
Product Attributes
- Brand: (Chipsensor)
- Material: Copper busbar and pins are tin-plated copper. Housing material meets UL94-V0 standard.
- Certifications: IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010
- Origin: China (implied by www.chipsensor.cn)
Technical Specifications
| Model | Primary Rated Current (IPN) | Primary Measurement Range (IPM) | Supply Voltage (VC) | Zero Output Voltage (VQOV) | Theoretical Gain (Gth) | Current Consumption (IC) | Load Resistance (RL) | Output Bandwidth (-3dB) (BW) | Output Noise (Vno) | Operating Temperature (TA) |
| AN1V 50 PB22 | 50 A | 0 - 50 A | 4.5 - 5.5 V | 0.1VCC | 80 mV/A | 8 - 11 mA | 5.1 k | 250 kHz | 5 mV | -40 - 150 |
| AN1V 100 PB22 | 100 A | 0 - 100 A | 4.5 - 5.5 V | 0.1VCC | 40 mV/A | 8 - 11 mA | 5.1 k | 250 kHz | 2.7 mV | -40 - 150 |
| AN1V 150 PB22 | 150 A | 0 - 150 A | 4.5 - 5.5 V | 0.1VCC | 26.66 mV/A | 8 - 11 mA | 5.1 k | 250 kHz | 1.8 mV | -40 - 125 |
| AN1V 200 PB22 | 200 A | 0 - 200 A | 4.5 - 5.5 V | 0.1VCC | 20 mV/A | 8 - 11 mA | 5.1 k | 250 kHz | 1.4 mV | -40 - 85 |
| AN1V 250 PB22 | 250 A | 0 - 250 A | 4.5 - 5.5 V | 0.1VCC | 16 mV/A | 8 - 11 mA | 5.1 k | 250 kHz | 1.1 mV | -40 - 85 |
Application Fields
- AC variable frequency speed control
- Uninterruptible Power Supply (UPS)
- DC motor drive static converter
- Switching Mode Power Supply (SMPS)
- Electric welding machine power supply
- Battery management
- Wind energy converter
Safety Precautions
Sensor usage must comply with IEC 61800-5-1 standard. Sensors must be installed in electronic or electrical equipment that meets application and safety requirements. Be aware of electric shock hazards; some parts may carry dangerous voltages during operation. The sensor is a built-in device, and its conductive parts must be protected from external contact after installation. The main power supply must be disconnectable.
2410121403_CHIPSENSE-AN1V-100-PB22_C30584743.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
