<
>
Specifications
Reset Temperature:
65℃
Mfr. Part #:
T22A09505DFFBG0E
Key Attributes
Model Number:
T22A09505DFFBG0E
Product Description
Product Overview
The T Series thermal motor protectors are designed as temperature limiters and thermal cut-outs for a variety of applications including motors, transformers, coils, and electronics. They offer both temperature and current sensitivity or temperature sensitivity only, with a focus on small dimensions and high power ratings. These devices are suitable for use in protection categories I and II and are resistant to impregnation with ordinary resins and lacquers.
Product Attributes
- Brand: Cantherm / Microtherm
- Certifications: VDE / ENEC, UL, CSA / cUL, CQC GB14536.1-1998 / GB14536.10-1996, EN 60730-1 / -2-9, UL File Number E46827, C22.2 No. 77 / C22.2 No. 24
- Origin: Canada (as indicated by country code C in marking)
- Protection Category: Suitable for I, II
- Degrees of Protection (EN 60529): IP00
Technical Specifications
| Model | Control Type | Rated Current at 250V (cos 0.95 / 0.6) | Max. Current at 250V (cos 0.95) | Switching Cycles (Rated Current) | Switching Cycles (Max. Current) | Temperature Rating (Ta) | Tolerance (Standard) | Hysteresis | Contact Resistance (incl. 100mm wire) | Dielectric Strength (Standard Insulation) | Shock/Vibration Testing |
|---|---|---|---|---|---|---|---|---|---|---|---|
| T10A / E | Normally Closed | 2.5 A / 1.6 A | 10.0 A | 10,000 | 300 | 70 C... 180 C (max. 160 C) | 5 K | 30 K 15 K | < 50 m | 2 kV | 400 m/s sine half wave / 100 m/s 5 Hz ... 2.000 Hz sine |
| T11A / E | Normally Closed | 2.5 A / 1.6 A | 10.0 A | 10,000 | 300 | 70 C... 180 C | 5 K | 30 K 15 K | < 50 m | 2 kV | 400 m/s sine half wave / 100 m/s 5 Hz ... 2.000 Hz sine |
| T12A / E | Normally Closed | 2.5 A / 1.6 A | 10.0 A | 10,000 | 300 | 70 C... 180 C | 5 K | 30 K 15 K | < 50 m | 2 kV | 400 m/s sine half wave / 100 m/s 5 Hz ... 2.000 Hz sine |
| T22A | Normally Closed | 6.3 A / 2.5 A | 12.0 A | 10,000 | 600 | 80 C ... 160 C | 5 K | 30 K 15 K | < 50 m | 2 kV | 400 m/s sine half wave / 100 m/s 5 Hz ... 2.000 Hz sine |
| T10B / G | Normally Open | 2.0 A / 1.6 A | 10.0 A | 10,000 | 1,000 | 70 C... 180 C (max. 160 C) | 5 K | 30 K 15 K | < 50 m | 2 kV | 400 m/s sine half wave / 100 m/s 5 Hz ... 2.000 Hz sine |
| T22B | Normally Open | 3.5 A / 2.0 A | 20.0 A | 10,000 | 1,000 | 80 C ... 160 C | 5 K | 30 K 15 K | < 50 m | 2 kV | 400 m/s sine half wave / 100 m/s 5 Hz ... 2.000 Hz sine |
| Note: Details on request for T22. Approval to EN60730-2-2 up to 180C for T12/T11. T10 available with 3 K tolerances and smaller hysteresis. Hysteresis may deviate at upper and lower Ta limits. | |||||||||||
Wire Specifications:
| Cantherm Code | Wire Type | Insulation Material | Max. Temperature | Max. Operating Voltage | AWG | Diameter (mm) | Color |
|---|---|---|---|---|---|---|---|
| DCDB | Solid Wire | PA 4.6 | 150 C | 300 V | AWG24 | 1.30 mm | White |
| DEDB | Solid Wire | PA 4.6 | 150 C | 300 V | AWG20 | 1.70 mm | White |
| LFDB | Solid Wire | PA 4.6 | 150 C | 300 V | AWG18 | 2.15 mm | White |
| ASDA | Solid Wire | PA 4.6 | 150 C | 300 V | AWG20 | 1.65 mm | Black |
| ACDA | Solid Wire | PA 4.6 | 150 C | 300 V | AWG18 | 1.45 mm | Black |
| DFDB | Solid Wire | PA 4.6 | 200 C | 600 V | AWG18 | 2.00 mm | White |
| AEDC | Solid Wire | PA 4.6 | 150 C | 300 V | AWG20 | 1.80 mm | Yellow |
| AFDA | Solid Wire | PA 4.6 | 200 C | 300 V | AWG20 | 1.65 mm | Black |
| UL3398 | Solid Wire | - | 200 C | 300 V | AWG20 | - | White |
| UL3266/3398 | Solid Wire | - | 200 C | 300 V | AWG18 | 2.15 mm | White |
Note: Additional wires available upon request. Standard wire length: 100 10 mm, stripped 6 1 mm.
Specific Variations:
| Model | Control Type | Cantherm Code | Illustration/Drawing | Dimensions (mm) | Insulation Type | Housing Type | Approvals |
|---|---|---|---|---|---|---|---|
| T10, T11, T12 | NC / NO | U102 | A, A, B | - | Standard | Shrink Cap, Potted | VDE, UL, cUL |
| T22 | NC / NO | U103 | A, B | - | Standard | Shrink Cap, Potted | VDE, UL, cUL, CSA |
| T10, T11, T12 | NC / NO | U106 | B, U106, F | - | Standard | Shrink Cap, Potted | VDE, UL, cUL |
| T22 | NC / NO | U107 | B, U107, G | - | Standard | Shrink Cap, Potted | VDE, UL, cUL, CSA |
| T10, T11, T12 | NC / NO | U183 | A, A, B | - | Cap of PA 4.6, Potted | - | VDE, UL, cUL |
| T11, T12 | NC / NO | U112 | A, A | - | Coated | - | VDE, UL, cUL |
| T22 | NC / NO | U112 | A, B | - | Coated | - | VDE, UL, cUL, CSA |
| T11, T12 | NC / NO | A334 | A | - | No insulation | PCB Connector Grid 5.08 | VDE, UL, cUL |
| T11, T12 | NC / NO | U314 | A | - | Cap of PPS | PCB Connector Grid 5.08 | VDE, UL, cUL |
| T11, T12 | NC / NO | U315 | A | - | Cap of PPS | PCB Connector Grid 5.08 | VDE, UL, cUL |
| T10, T11, T12 | NC / NO | U293 | A, A, B | - | Housing of PPS, Potted | - | VDE, UL, cUL |
| T10, T11, T12 | NC / NO | G718 | E, E, G | - | Potted Aluminium Housing Anodized Black M4x10 | - | VDE, UL, cUL |
| T22 | NC / NO | 0 | A, B | - | No insulation, Potted | - | VDE, UL, cUL, CSA |
Marking Example (Microtherm): T11 A 120 05 L310 100 U250
Ordering Example (Cantherm): [ T1112025AEDCB0E ]
2411272145_Cantherm-T22A09505DFFBG0E_C17668890.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
